[1] [1] HENNING F, MOELLER E. Handbuch Leichtbau: Methoden,Werkstoffe, Fertigung[M]. München: Hanser Verlag, 2011: 393–411.

[2] [2] FAHRENHOLTZ W G, HILMAS G E, TALMY I G, et al. Refractory diborides of zirconium and hafnium[J]. J Am Ceram Soc, 2007, 90(5):1347–1364.

[3] [3] DESMAISON-BRUT M, ALEXANDRE N, DESMAISON J.Comparison of the oxidation behaviour of two dense hot isostatically pressed tantalum carbide (TaC and Ta2C) Materials[J]. J Eur Ceram Soc, 1997, 17(11): 1325–1334.

[4] [4] AHLéN N, JOHNSSON M, NYGREN M. Oxidation behaviour of TaxTi1–xC and TaxTi1–xCyN1–y whiskers[J]. Thermochim Acta, 1999,336(1/2): 111–120.

[5] [5] OPEKA M M, TALMY I G, WUCHINA E J, et al. Mechanical,thermal, and oxidation properties of refractory hafnium and zirconium compounds[J]. J Eur Ceram Soc, 1999, 19(13/14): 2405–2414.

[6] [6] REZAIE A, FAHRENHOLTZ W G, HILMAS G E. Evolution of structure during the oxidation of zirconium diboride–silicon carbide in air up to 1500℃[J]. J Eur Ceram Soc, 2007, 27(6): 2495–2501.

[7] [7] HUANG L M, XIANG Y, CAO F, et al. The degradation behavior of UHTCs based coatings coated PIP-C/SiC composites in thermal cycling environment[J]. Compos Part B Eng, 2016, 86: 126–134.

[8] [8] FAN C Y, ZOU B L, ZHU L, et al. Oxidation and thermal shock resistant properties of Si/Yb2SiO5/NdMgAl11O19 coating deposited on Cf/SiC composites[J]. Mater Des, 2017, 116: 261–267.

[9] [9] CHEN Y G, LU Y H, YE Q, et al. A self-healing environmental barrier coating: TiSi2-doped Y2Si2O7/barium strontium aluminosilicate coating[J]. Surf Coat Technol, 2016, 307: 436–440.

[10] [10] COJOCARU C V, LéVESQUE D, MOREAU C, et al. Performance of thermally sprayed Si/mullite/BSAS environmental barrier coatings exposed to thermal cycling in water vapor environment[J]. Surf CoatTechnol, 2013, 216: 215–223.

[11] [11] TIAN Z L, ZHENG L Y, WANG J M, et al. Theoretical and experimental determination of the major thermo-mechanical properties of RE 2 SiO 5 (RE = Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y) for environmental and thermal barrier coating applications[J]. J Eur Ceram Soc, 2016, 36(1): 189–202.

[12] [12] MORE K L, TORTORELLI P F, FERBER M K, et al. Observations of accelerated silicon carbide recession by oxidation at high water-vapor pressures[J]. J Am Ceram Soc, 2000, 83(1), 211–213.

[13] [13] ZHANG X F, WANG C, YE R J, et al. Mechanism of vertical crackformation in Yb2SiO5 coatings deposited via plasma spray-physical vapor deposition[J]. J Materiomics, 2020, 6(1): 102–108.

[14] [14] COSTA G C C, JACOBSON N S. Mass spectrometric measurements of the silica activity in the Yb2O3–SiO2 system and implications to assess the degradation of silicate-based coatings in combustion environments[J]. J Eur Ceram Soc, 2015, 35(15): 4259–4267.

[15] [15] TIAN Z L, REN X M, LEI Y M, et al. Corrosion of RE2Si2O7 (RE=Y,Yb, and Lu) environmental barrier coating materials by molten calcium-magnesium-alumino-silicate glass at high temperatures[J]. J Eur Ceram Soc, 2019, 39(14): 4245–4254.

[16] [16] TIAN Z L, ZHENG L Y, WANG J M, et al. Damage tolerance and extensive plastic deformation of β-Yb2Si2O7 from room to high temperatures[J]. J Am Ceram Soc, 2015, 98(9): 2843–2851.

[17] [17] ZHAO H B, LEVI C G, WADLEY H N G. Molten silicate interactions with thermal barrier coatings[J]. Surf Coat Technol, 2014, 251: 74–86.

[18] [18] RICHARDS B T, BEGLEY M R, WADLEY H N G. Mechanisms of ytterbium monosilicate/mullite/silicon coating failure During Thermal cycling in water vapor[J]. J Am Ceram Soc, 2015, 98(12): 4066–4075.

[19] [19] RICHARDS B T, ZHAO H B, WADLEY H N G. Structure, composition, and defect control during plasma spray deposition of ytterbium silicate coatings[J]. J Mater Sci, 2015, 50(24): 7939–7957.

[20] [20] OLSON D H, DEIJKERS J A, QUIAMBAO-TOMKO K, et al.Evolution of microstructure and thermal conductivity of multifunctional environmental barrier coating systems[J]. Mater Today Phys, 2021, 17:100304.

[21] [21] LI K B, WANG W Z, YANG T, et al. Simulation of 1500 ℃ thermal shock for novel structural thermal/environmental barrier coatings system[J]. Coatings, 2023, 13(1): 96.

[22] [22] RIDLEY M, OPILA E. Thermochemical stability and microstructural evolution of Yb2Si2O7 in high-velocity high-temperature water vapor[J].J Eur Ceram Soc, 2021, 41(5): 3141–3149.

[23] [23] BAKAN E, KINDELMANN M, KUNZ W, et al. High-velocity water vapor corrosion of Yb-silicate: Sprayed vs. sintered body[J]. Scr Mater,2020, 178: 468–471.

[24] [24] TORKASHVAND K, POURSAEIDI E, MOHAMMADI M. Effect of TGO thickness on the thermal barrier coatings life under thermal shock and thermal cycle loading[J]. Ceram Int, 2018, 44(8): 9283–9293.

[25] [25] LU M H, XIANG H M, FENG Z H, et al. Mechanical and thermal properties of Yb2SiO5: A promising material for T/EBCs applications[J].J Am Ceram Soc, 2016, 99(4): 1404–1411.

[26] [26] KASSEM R, AL NASIRI N. A comprehensive study on the mechanical properties of Yb2SiO5 as a potential environmental barrier coating[J].Surf Coat Technol, 2021, 426: 127783.

[27] [27] WANG X, XUE Z L, ZHOU Z M, et al. Influence of Yb2Si2O7 doping concentration on mechanical properties and thermal conductivity of Yb2SiO5-Yb2Si2O7 composite ceramics[J]. J Alloys Compd, 2021, 889:161718.

[28] [28] OKAWA A, NGUYEN S T, WIFF J P, et al. Self-healing ability, strength enhancement, and high-temperature oxidation behavior of silicon carbide-dispersed ytterbium disilicate composite for environmental barrier coatings under isothermal heat treatment[J]. J Eur Ceram Soc, 2022, 42(13): 6170–6181.

[29] [29] RICHARDS B T, SEHR S, DE FRANQUEVILLE F, et al. Fracture mechanisms of ytterbium monosilicate environmental barrier coatings during cyclic thermal exposure[J]. Acta Mater, 2016, 103: 448–460.