[1] [1] FENG G Y, ZHU D J, GUO S C, et al. A review on mechanical properties and deterioration mechanisms of FRP bars under severe environmental and loading conditions[J]. Cem Concr Compos, 2022, 134: 104758.

[2] [2] MA Q M, GUO R X, ZHAO Z M, et al. Mechanical properties of concrete at high temperature—A review[J]. Constr Build Mater, 2015, 93: 371–383.

[3] [3] NASSER I M, IBRAHIM M H W, ZUKI S S M, et al. The effect of nanosilica incorporation on the mechanical properties of concrete exposed to elevated temperature: A review[J]. Environ Sci Pollut Res Int, 2022, 29(11): 15318–15336.

[4] [4] ZHANG P, KANG L Y, WANG J, et al. Mechanical properties and explosive spalling behavior of steel-fiber-reinforced concrete exposed to high temperature—A review[J]. Appl Sci, 2020, 10(7): 2324.

[5] [5] WU Z M, SHI C J, HE W, et al. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete[J]. Constr Build Mater, 2016, 103: 8–14.

[6] [6] SHI C J, WU Z M, XIAO J F, et al. A review on ultra high performance concrete: Part I. Raw materials and mixture design[J]. Constr Build Mater, 2015, 101: 741–751.

[7] [7] HE B, ZHU X P, REN Q, et al. Effects of fibers on flexural strength of ultra-high-performance concrete subjected to cryogenic attack[J]. Constr Build Mater, 2020, 265: 120323.

[8] [8] HOLAN J, NOVK J, MLLER P, et al. Experimental investigation of the compressive strength of normal-strength air-entrained concrete at high temperatures[J]. Constr Build Mater, 2020, 248: 118662.

[10] [10] LI J Q, WU Z M, SHI C J, et al. Durability of ultra-high performance concrete–A review[J]. Constr Build Mater, 2020, 255: 119296.

[12] [12] PENG G F, YANG W W, ZHAO J, et al. Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures[J]. Cem Concr Res, 2006, 36(4): 723–727.

[13] [13] LU J X, SHEN P L, SUN Y J, et al. Strategy for preventing explosive spalling and enhancing material efficiency of lightweight ultra high-performance concrete[J]. Cem Concr Res, 2022, 158: 106842.

[14] [14] CHENG F P, KODUR V K R, WANG T C. Stress-strain curves for high strength concrete at elevated temperatures[J]. J Mater Civ Eng, 2004, 16(1): 84–90.

[15] [15] MOHAMEDBHAI G T G. Effect of exposure time and rates of heating and cooling on residual strength of heated concrete[J]. Mag Concr Res, 1986, 38(136): 151–158.

[16] [16] SAHA A K, SARKER P K, GOLOVANEVSKIY V. Thermal properties and residual strength after high temperature exposure of cement mortar using ferronickel slag aggregate[J]. Constr Build Mater, 2019, 199: 601–612.

[17] [17] ZHANG B, BICANIC N, PEARCE C J, et al. Residual fracture properties of normal-and high-strength concrete subject to elevated temperatures[J]. Mag Concr Res, 2000, 52(2): 123–136.

[18] [18] ZHANG D, LIU Y C, TAN K H. Spalling resistance and mechanical properties of strain-hardening ultra-high performance concrete at elevated temperature[J]. Constr Build Mater, 2021, 266: 120961.

[19] [19] WANG Y Y, LIU F Q, XU L F, et al. Effect of elevated temperatures and cooling methods on strength of concrete made with coarse and fine recycled concrete aggregates[J]. Constr Build Mater, 2019, 210: 540–547.

[20] [20] BABALOLA O E, AWOYERA P O, LE D H, et al. A review of residual strength properties of normal and high strength concrete exposed to elevated temperatures: Impact of materials modification on behaviour of concrete composite[J]. Constr Build Mater, 2021, 296: 123448.

[21] [21] SAHMARAN M, LACHEMI M, LI V C. Assessing mechanical properties and microstructure of fire-damaged engineered cementitious composites[J]. ACI Mater J, 2010, 107(3): 297–304.

[23] [23] JU Y, WANG L, LIU H B, et al. An experimental investigation of the thermal spalling of polypropylene-fibered reactive powder concrete exposed to elevated temperatures[J]. Sci Bull, 2015, 60(23): 2022–2040.

[24] [24] YAO W, LI J, WU K R. Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction[J]. Cem Concr Res, 2003, 33(1): 27–30.

[25] [25] SIVAKUMAR A, SANTHANAM M. Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres[J]. Cem Concr Compos, 2007, 29(8): 603–608.

[27] [27] KHALIQ W, KODUR V. Effectiveness of polypropylene and steel fibers in enhancing fire resistance of high-strength concrete columns[J]. J Struct Eng, 2018, 144(3): 04017224.

[29] [29] ZHANG J R, LV T, ZHU Y, et al. Damage mechanism of engineered cementitious composites after exposed to elevated temperatures: Experimental and molecular dynamics study[J]. Cem Concr Compos, 2022, 129: 104507.

[30] [30] XIAO J Z, XIE Q H, XIE W G. Study on high-performance concrete at high temperatures in China (2004–2016) - An updated overview[J]. Fire Saf J, 2018, 95: 11–24.

[31] [31] LI Y, YANG E H, TAN K H. Flexural behavior of ultra-high performance hybrid fiber reinforced concrete at the ambient and elevated temperature[J]. Constr Build Mater, 2020, 250: 118487.

[32] [32] SONG P S, HWANG S. Mechanical properties of high-strength steel fiber-reinforced concrete[J]. Constr Build Mater, 2004, 18(9): 669–673.

[33] [33] THOMAS J, RAMASWAMY A. Mechanical properties of steel fiber-reinforced concrete[J]. J Mater Civ Eng, 2007, 19(5): 385–392.

[34] [34] WILLE K, EL-TAWIL S, NAAMAN A E. Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading[J]. Cem Concr Compos, 2014, 48: 53–66.

[35] [35] XIAO J Z, FALKNER H. On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures[J]. Fire Saf J, 2006, 41(2): 115–121.

[37] [37] SO H S, JANG H S, KHULGADAI J, et al. Mechanical properties and microstructure of reactive powder concrete using ternary pozzolanic materials at elevated temperature[J]. KSCE J Civ Eng, 2015, 19(4): 1050–1057.

[38] [38] DIEDERICHS U, SCHNEIDER U. Bond strength at high temperatures[J]. Mag Concr Res, 1981, 33(115): 75–84.

[40] [40] DU L P, JI X P, LU K W, et al. Evaluation of bond behaviors on functionally graded ultra-high performance concrete (FGUHPC) subjected to elevated temperature[J]. Eng Struct, 2023, 274: 115112.

[41] [41] BINGL A F, GL R. Residual bond strength between steel bars and concrete after elevated temperatures[J]. Fire Saf J, 2009, 44(6): 854–859.

[43] [43] XIAO J Z, HOU Y Z, HUANG Z F. Beam test on bond behavior between high-grade rebar and high-strength concrete after elevated temperatures[J]. Fire Saf J, 2014, 69: 23–35.

[45] [45] ABDALLAH S, FAN M Z, CASHELL K A. Bond-slip behaviour of steel fibres in concrete after exposure to elevated temperatures[J]. Constr Build Mater, 2017, 140: 542–551.

[46] [46] DENG Y L, ZHANG Z H, SHI C J, et al. Steel fiber–matrix interfacial bond in ultra-high performance concrete: A review[J]. Engineering, 2023, 22: 215–232.

[47] [47] ZHENG W Z, LUO B F, WANG Y. Compressive and tensile properties of reactive powder concrete with steel fibres at elevated temperatures[J]. Constr Build Mater, 2013, 41: 844–851.

[48] [48] KLINGSCH E W. Explosive spalling of concrete in fire[D]. ETH Zurich, 2014.

[49] [49] ZHANG X. Investigation of influence of PP fiber on performances of HPC under high temperature[J]. J Build Mater, 2004.

[50] [50] XIAO J Z, XIE M, ZHANG C. Residual compressive behaviour of pre-heated high-performance concrete with blast–furnace–slag[J]. Fire Saf J, 2006, 41(2): 91–98.

[52] [52] AHN Y B, JANG J G, LEE H K. Mechanical properties of lightweight concrete made with coal ashes after exposure to elevated temperatures[J]. Cem Concr Compos, 2016, 72: 27–38.

[53] [53] DEMIREL B, KELETEMUR O. Effect of elevated temperature on the mechanical properties of concrete produced with finely ground pumice and silica fume[J]. Fire Saf J, 2010, 45(6–8): 385–391.

[54] [54] WANG Y G, LI S P, HUGHES P, et al. Mechanical properties and microstructure of basalt fibre and nano-silica reinforced recycled concrete after exposure to elevated temperatures[J]. Constr Build Mater, 2020, 247: 118561.

[55] [55] NOUMOWE A. Mechanical properties and microstructure of high strength concrete containing polypropylene fibres exposed to temperatures up to 200 ℃[J]. Cem Concr Res, 2005, 35(11): 2192–2198.

[56] [56] SARKER P K, KELLY S, YAO Z T. Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete[J]. Mater Des, 2014, 63: 584–592.

[57] [57] THOKCHOM S, MANDAL K K, GHOSH S. Effect of Si/Al ratio on performance of fly ash geopolymers at elevated temperature[J]. Arab J Sci Eng, 2012, 37(4): 977–989.

[58] [58] ZHANG H E, LI L, YUAN C, et al. Deterioration of ambient-cured and heat-cured fly ash geopolymer concrete by high temperature exposure and prediction of its residual compressive strength[J]. Constr Build Mater, 2020, 262: 120924.

[59] [59] VISSER J H M. Extensile hydraulic fracturing of (saturated) porous materials[D]. Technische Universiteit Delft, 1999.

[60] [60] FELDMAN R F, RAMACHANDRAN V S. Differentiation of interlayer and adsorbed water in hydrated Portland cement by thermal analysis[J]. Cem Concr Res, 1971, 1(6): 607–620.

[61] [61] SHEN J R, XU Q J. Effect of elevated temperatures on compressive strength of concrete[J]. Constr Build Mater, 2019, 229: 116846.

[62] [62] NADEEM A, ALI MEMON S, LO T Y. Qualitative and quantitative analysis and identification of flaws in the microstructure of fly ash and metakaolin blended high performance concrete after exposure to elevated temperatures[J]. Constr Build Mater, 2013, 38: 731–741.

[63] [63] LIM S, MONDAL P. Micro- and nano-scale characterization to study the thermal degradation of cement-based materials[J]. Mater Charact, 2014, 92: 15–25.

[64] [64] CHAN Y N, PENG G F, ANSON M. Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures[J]. Cem Concr Compos, 1999, 21(1): 23–27.

[65] [65] LUO X, SUN W, CHAN S Y N. Effect of heating and cooling regimes on residual strength and microstructure of normal strength and high-performance concrete[J]. Cem Concr Res, 2000, 30(3): 379–383.

[67] [67] PENG G F, HUANG Z S. Change in microstructure of hardened cement paste subjected to elevated temperatures[J]. Constr Build Mater, 2008, 22(4): 593–599.

[68] [68] CASTELLOTE M, ALONSO C, ANDRADE C, et al. Composition and microstructural changes of cement pastes upon heating, as studied by neutron diffraction[J]. Cem Concr Res, 2004, 34(9): 1633–1644.

[70] [70] KALIFA P, CHN G, GALL C. High-temperature behaviour of HPC with polypropylene fibres[J]. Cem Concr Res, 2001, 31(10): 1487–1499.

[71] [71] CHEN G M, YANG H, LIN C J, et al. Fracture behaviour of steel fibre reinforced recycled aggregate concrete after exposure to elevated temperatures[J]. Constr Build Mater, 2016, 128: 272–286.

[72] [72] CHEN G M, HE Y H, YANG H, et al. Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures[J]. Constr Build Mater, 2014, 71: 1–15.

[73] [73] AHMAD S, RASUL M, ADEKUNLE S K, et al. Mechanical properties of steel fiber-reinforced UHPC mixtures exposed to elevated temperature: Effects of exposure duration and fiber content[J]. Compos Part B Eng, 2019, 168: 291–301.

[74] [74] GARY M. Brandproben an eisenbetonbauten: Ausgefhrt im knigl[R]. Deutscher Ausschuss fr Eisenbeton Heft 1916.

[75] [75] P S. Resistance to high temperature, in significance of tests and properties of concrete and concrete-making materials[R]. Philadelphia. ASTM Publication STP 169B, 1978.

[76] [76] ANDERBERG Y. Spalling phenomena of HPC and OC[C]: Proceedings of the NIST Workshop on Fire Performance of High Strength Concrete in Gaithersburg. US Government Printing Office North Capitol, WA, USA, 1997.

[77] [77] SHORTER G, HARMATHY T. Moisture clog spalling[J]. Proc Inst of Civil Eng, 1965, 20: 75–90.

[78] [78] MEYER-OTTENS C. Zur Frage der Abplatzungen an Betonbauteilen aus Normalbeton bei Brandbeanspruchung[D]. Braunschweig, Technische Universitt Braunschweig, 1972.

[79] [79] ALI AMJAD A. The effect of transient and stationary temperature on concrete[D]. London, UK: Imperial College London, 1973.

[80] [80] KALIFA P, MENNETEAU F D, QUENARD D. Spalling and pore pressure in HPC at high temperatures[J]. Cem Concr Res, 2000, 30(12): 1915–1927.

[81] [81] CHAN S Y N, PENG G-F, ANSON M. Fire behavior of high-performance concrete made with silica fume at various moisture contents[J]. ACI Mater J, 1999, 96(3): 405–409.

[82] [82] HERTZ K D. Danish investigations on silica fume concretes at elevated temperatures[J]. ACI Mater J, 1992, 89(4): 345–347.

[83] [83] PHAN L T, LAWSON J R, DAVIS F L. Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete[J]. Mat Struct, 2001, 34(2): 83–91.

[84] [84] SAITO H. Explosive spalling of prestressed concrete in fire[J]. Bull Jpn Assoc Fire Sci Eng, 1966, 15(2): 23–30.

[85] [85] DWAIKAT M B, KODUR V K R. Hydrothermal model for predicting fire-induced spalling in concrete structural systems[J]. Fire Saf J, 2009, 44(3): 425–434.

[86] [86] BAZANT Z P. Analysis of pore pressure, thermal stress and fracture in rapidly heated concrete; proceedings of the Proceedings of International Workshop on Fire Performance of High-Strength Concrete, Gaithersburg, F, 1997[C]. NIST Special Publication 919.

[87] [87] KHOURY G A, ANDERBERG Y. Concrete spalling review[J]. Fire Safety Design, 2000, 60: 5–12.

[88] [88] ULM F J, COUSSY O, BAANT Z P. The “chunnel” fire. I: Chemoplastic softening in rapidly heated concrete[J]. J Eng Mech, 1999, 125(3): 272–282.

[90] [90] ZHUKOV V. Explosive failure of concrete during a fire (in Russian)[D]. Joint Fire Research Organisation, 1975.

[91] [91] SERTMEHMETOGLU Y. On a mechanism of spalling of concrete under fire conditions[D]. London, UK: King’s College London, 1977

[92] [92] CONNOLLY RAYMOND J. The spalling of concrete in fires[D]. Birmingham, West Midlands, UK: Aston University, 1995

[93] [93] FU Y F, WONG Y L, TANG C A, et al. Thermal induced stress and associated cracking in cement-based composite at elevated temperatures–– Part I: Thermal cracking around single inclusion[J]. Cem Concr Compos, 2004, 26(2): 99–111.

[94] [94] FU Y F, WONG Y L, POON C S, et al. Experimental study of micro/macro crack development and stress–strain relations of cement-based composite materials at elevated temperatures[J]. Cem Concr Res, 2004, 34(5): 789–797.

[95] [95] KODUR V K R, PHAN L. Critical factors governing the fire performance of high strength concrete systems[J]. Fire Saf J, 2007, 42(6/7): 482–488.

[96] [96] PENG G F, KANG Y R, HUANG Y Z, et al. Experimental research on fire resistance of reactive powder concrete[J]. Adv Mater Sci Eng, 2012, 2012: 860303.

[98] [98] JU Y, LIU J H, LIU H B, et al. On the thermal spalling mechanism of reactive powder concrete exposed to high temperature: Numerical and experimental studies[J]. Int J Heat Mass Transf, 2016, 98: 493–507.