[1] [1] FREEMAN R,RIGBY F. temperature-dependent reflectance of plated metals and composite materials under laser irradiation［C］. 29th Plasmadynamics and lasers conference,1998, Albuquerque, NM, AIAA-98-2482.

[2] [2] ZHANG Y Q，WANG W P，TANG X S.Coupl ing rules of two f iber reinforced composites with continuous wave laser［J］.High Power Laser and Particle Beams，2007，19(10)：1599-1602. (in Chinese)

[3] [3] WANG G B, LUO F, LIU C L. Reflectance change of 45 # steel irradiated by laser in atmosphere［J］.High Power Laser and Particle Beams，2006，18 (2)：181-183.(in Chinese)

[4] [4] ZHANG K X，LIU C L，ZHANG N，et al.. The thermal coupling effects of CW/COIL radiation to LF6M aluminum alloy plates［J］. High Power Laser and Particle Beams，1994，6(4)：501-508.(in Chinese)

[5] [5] MARRUJO A R,HENSEL E C. High energy laser beam diagnostics［J］. SPIE,1993,1871:265-276.

[6] [6] LAMAR C R. Laser diagnostics by heat conduction［C］. AIAA/ASME 4th Joint Thermophysics and Heat Transfer Conference, 1986,Boston, Massachusetts.

[7] [7] BRUNOTTE. Calorimetric measurements of total hemispherical emittance of selective surfaces at high temperatures［J］.SPIE, 1992, 1727:149-160.

[8] [8] DIJON J. Laser induced absorption at 355nm silica studied by calorimetry and photothermal deflection ［J］. SPIE,1996,2714:61-70.

[9] [9] WILLAMOWSKI U,RISTAU D,WELSCH E. Measuring the absolute absorptance of optical laser components［J］. Appl. Opt.,1998,37(36):8362-8370.

[10] [10] WILLAMOWSKI U, GROSS T, RISTAU D,et al.. Calorimetric measurement of optical absorption and transmittivity with sub ppm sensitivity［J］. SPIE,1996,2775.

[11] [11] BERNAL E G. Heat flow analysis of Laser absorption calorimetry［J］. Appl. Opt., 1975,14(2):314-321.

[12] [12] LIU F，WU ZH S，WANG L J. Theory of the laser beam intensity temporal and spatial distribution reconstructed from measurements of thermal image ［J］.Acta Optica Sinica，2007,27(1)：96-104.(in Chinese)

[13] [13] LIU F, WU ZH S, XIE Y J. Reconstruction method of far field laser energy measured with calorimetric array［J］. Chin. J . Lasers, 2006,33(12)：1615-1620. ( in Chinese)

[14] [14] LIU F，WU ZH S，CHEN Y SH.Reconstruction algorithm for laser intensity temporal spatial distribution from measured temperature distribution on target surface［J］.Acta Optica Sinica，2007 ，27(11)：2013-2019.(in Chinese)

[15] [15] 《Mathematics Handbook》Compile-Group.Mathematics Handbook［M］.Beijing:High Education Press，1979:909.(in Chinese)

[16] [16] LIU F, WU ZH S, WANG Y H. Heating efficiency repetitive frequency intensity laser-irradiated cylinder ［J］.Chinese J.Lasers, 2006,33(4):461-466.(in Chinese)

[17] [17] ALIMOV D T,EDVABNYI I V.Effect of the heat of reaction on the development of thermochemical instability ［J］.Fizika Goreniyai Vzryva, 1985,21(5)：57-60.

[18] [18] ANTONOV V, IORDANOVA I,GURKOVSKY S. Investigation of surface oxidation of low carbon sheet steel during its treatment with Nd:Glass pulsed laser［J］. Surface and Coatings Technology,2002,160:44-53.

[19] [19] YUAN H，ZHAO J H，TAN F L，et al..Numerical simulation of the temperature distribution on a rotational cylindrical shell under laser irradiation［J］.High Power Laser and Particle Beams, 2005, 17(5)：681-684.(in Chinese)

[20] [20] BOLEY C D,RUBENCHIK A M.Modeling antimortar lethality by a solid-state heat-capacity laser［C］.Second Annual High Energy Laser Lethality Conference, Tampa, FL, United States,2005:1-14.

[21] [21] China Engineering Material Applied Handbooks Editor Committee. Engineering Material Applied Handbooks：Framework-steel and Stainless-steel［M］.Beijing:China Standard Press，1988:58. (in Chinese)