[1] [1] YUAN J L, WANG ZH W, WEN D H, et al.. Review of the current situation of ultra-precision machining［J］. Chinese Journal of Mechanical Engineering, 2007, 43(1): 35-48. (in Chinese)

[2] [2] LEE W B, KONG L B, ZHANG ZH H, et al.. An overview of ultra-precision diamond machining of microstructured freeform surfaces［J］. Journal of Mechanical Engineering, 2013, 49(19): 144-155. (in Chinese)

[3] [3] WANG ZH B, YANG H. Role of ultraprecision machining technique in new situation［J］. Aviation Precision Manufacturing Technology, 2004, 40(3): 1-5. (in Chinese)

[4] [4] LUO S B. The development of diamond ultraprecision turning tool technology［J］. Aviation Precision Manufacturing Technology, 2007, 43(1): 1-4. (in Chinese)

[5] [5] LI Z Q. Mechanical lapping and measurement techniques of nose arc of rounded diamond cutting tools［D］. Harbin: Harbin Institute of Technology, 2008. (in Chinese)

[6] [6] JANG S H, SHIMIZU Y, ITO S, et al.. A micro optical probe for edge contour evaluation of diamond cutting tools［J］. Journal of Sensors and Sensor Systems, 2014, 3(1): 69-76.

[7] [7] LUCCA D A, SEO Y W, KOMANDURI R. Effect of tool edge geometry on energy dissipation in ultraprecision machining［J］. CIRP Annals-Manufacturing Technology, 1993, 42(1): 83-86.

[8] [8] ASAI S, TAGUCHI Y, HORIO K, et al.. Measuring the very small cutting-edge radius for a diamond tool using a new kind of SEM having two detectors［J］. CIRP Annals-Manufacturing Technology, 1990, 39(1): 85-88.

[9] [9] ZHOU J B, LI Z Q, WANG Y Q, et al.. Tool tip arc measurement and characterization of micro-arc diamond tools［J］. Nanotechnology and Precision Engineering, 2013, 11(4): 334-340. (in Chinese)

[10] [10] LI Z Q, SUN T, LI P, et al.. Measuring the nose roundness of diamond cutting tools based on atomic force microscopy［J］. Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 2009, 27(3): 1394-1398.

[11] [11] LI D, FANG J G, LUO ZH. Research on precision measurement and evaluationof single crystal diamond tools［J］. Aviation Precision Manufacturing Technology, 2016, 52(2): 10-13. (in Chinese)

[12] [12] WHITEHOUSE D J. Some theoretical aspects of error separation techniques in surface metrology［J］. Journal of Physics E: Scientific Instruments, 1976, 9(7): 531-536.

[13] [13] DONALDSON R R. A simple method for separating spindle error from test ball roundness error［J］. CIRP Annals-Manufacturing Technology, 1972, 21(1): 125-126.

[14] [14] MARSH E R, ARNESON D A, MARTIN D L. A comparison of reversal and multiprobe error separation［J］. Precision Engineering, 2010, 34(1): 85-91.