[1] [1] Klocke F, Soo S L, Karpuschewski B, Webster J A, Novovic D, Elfizy A, Axinte D A and T.nissen S 2015 Abrasive machining of advanced aerospace alloys and composites CIRP Ann.-Manuf. Technol. 64 581–604

[2] [2] Sun J Y, Yang S and Yuan H 2021 Assessment of thermo-mechanical fatigue in a nickel-based single-crystal superalloy CMSX-4 accounting for temperature gradient effects Mater. Sci. Eng. A 809 140918

[3] [3] Miao Q, Ding W F, Kuang W J and Yang C Y 2021 Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels Chin. J. Aeronaut. 34 576–85

[4] [4] Chen J J, Fu Y C, Qian N, Jiang H F, Ching C Y, Ewing D and Dai C W 2021 Investigation on cooling behavior of axially rotating heat pipe in profile grinding of turbine blade slots Appl. Therm. Eng. 182 116031

[5] [5] Aspinwall D K, Soo S L, Curtis D T and Mantle A L 2007 Profiled superabrasive grinding wheels for the machining of a nickel based superalloy CIRP Ann.-Manuf. Technol. 56 335–8

[6] [6] LiHN,ZhaoYJ,CaoSY,ChenH,WuCQ,QiH,SunX, Wang H X, Li C H and Liu G Y 2021 Controllable generation of 3D textured abrasive tools via multiple-pass laser ablation J. Mater. Process. Technol. 295 117149

[7] [7] Fan Z H, Tian Y B, Zhou Q and Shi C 2020 A magnetic shear thickening media in magnetic field–assisted surface finishing Proc. Inst. Mech. Eng. B 234 1069–72

[8] [8] ChenJJ,FuYC,QianN,ChingCY,EwingDandHeQS 2021 A study on thermal performance of revolving heat pipe grinding wheel Appl. Therm. Eng. 182 116065

[9] [9] TianYB,LiLG,HanJG,FanZHandLiuK2021 Development of novel high-shear and low-pressure grinding tool with flexible composite Mater. Manuf. Process. 36 479–87

[10] [10] TianYB,LiLG,LiuB,HanJGandFanZH2020 Experimental investigation on high-shear and low-pressure grinding process for Inconel718 superalloy Int. J. Adv. Manuf. Technol. 107 3425–35

[11] [11] Liao Z R, la Monaca A, Murray J, Speidel A, Ushmaev D, Clare A, Axinte D and M’Saoubi R 2021 Surface integrity in metal machining—part I: fundamentals of surface characteristics and formation mechanisms Int. J. Mach. Tools Manuf. 162 103687

[12] [12] XuYC,GongYD,WangZX,WenXL,YinGQ,ZhangH and Qi Y 2021 Experimental study of Ni-based single-crystal superalloy: microstructure evolution and work hardening of ground subsurface Arch. Civ. Mech. Eng. 21 43

[13] [13] Wang Y S, Xiu S C and Zhang S N 2021 Microstructure evolution and crystallographic slip modes during grind hardening in TC21 titanium alloy Surf. Coat. Technol. 417 127211

[14] [14] Thakur A and Gangopadhyay S 2016 State-of-the-art in surface integrity in machining of nickel-based super alloys Int. J. Mach. Tools Manuf. 100 25–54

[15] [15] Wenfeng D, Jiuhua X, Zhenzhen C, Honghua S and Yucan Y C 2010 Grindability and surface integrity of cast nickel-based superalloy in creep feed grinding with brazed CBN abrasive wheels Chin. J. Aeronaut. 23 501–10

[16] [16] Curtis D T, Soo S L, Aspinwall D K and Mantle A L 2016 Evaluation of workpiece surface integrity following point grinding of advanced titanium and nickel based alloys Proc. CIRP 45 47–50

[17] [17] Liao Z R, Polyakov M, Diaz O G, Axinte D, Mohanty G, Maeder X, Michler J and Hardy M 2019 Grain refinement mechanism of nickel-based superalloy by severe plastic deformation—mechanical machining case Acta Mater. 180 2–14

[18] [18] Ding J, Li Q, Li J, Xue S, Fan Z, Wang H and Zhang X 2018 Mechanical behavior of structurally gradient nickel alloy Acta Mater. 149 57–67

[19] [19] Liu X C, Zhang H W and Lu K 2013 Strain-induced ultrahard and ultrastable nanolaminated structure in nickel Science 342 337–40

[20] [20] Liu X C, Zhang H W and Lu K 2015 Formation of nano-laminated structure in nickel by means of surface mechanical grinding treatment Acta Mater. 96 24–36

[21] [21] Reed R C 2006 The Superalloys: Fundamentals and Applications (Cambridge: Cambridge University Press)

[22] [22] Jichun X, Jiarong L and Shizhong L 2010 Surface recrystallization in nickel base single crystal superalloy DD6 Chin. J. Aeronaut. 23 478–85

[23] [23] Swaminathan S et al 2005 Large strain deformation and ultra-fine grained materials by machining Mater. Sci. Eng. A 410–1 358–63

[24] [24] Xiong X H, Quan D M, Dai P D, Wang Z P, Zhang Q X and Yue Z F 2015 Tensile behavior of nickel-base single-crystal superalloy DD6 Mater. Sci. Eng. A 636 608–12

[25] [25] Miao Q, Li H N and Ding W F 2020 On the temperature field in the creep feed grinding of turbine blade root: simulation and experiments Int. J. Heat Mass Transfer 147 118957

[26] [26] Miao Q, Ding W F, Kuang W J and Xu J H 2020 Tool wear behavior of vitrified microcrystalline alumina wheels in creep feed profile grinding of turbine blade root of single crystal nickel-based superalloy Tribol. Int. 145 106144

[27] [27] Chen Y X, Yang Y Q, Feng Z Q, Huang B and Luo X 2017 Surface gradient nanostructures in high speed machined 7055 aluminum alloy J. Alloys Compd. 726 367–77

[28] [28] WuCJ,GuoWC,LiR,ZhaoYDandZhouQZ2020 Thermal effect on oxidation layer evolution and phase transformation in grinding of Fe-Ni super alloy Mater. Lett. 275 128072

[29] [29] Cheng Z, Zhou H F, Lu Q H, Gao H J and Lu L 2018 Extra strengthening and work hardening in gradient nanotwinned metals Science 362 eaau1925

[30] [30] Lu K 2016 Stabilizing nanostructures in metals using grain and twin boundary architectures Nat. Rev. 1 16019

[31] [31] Sun L G, Wu G, Wang Q and Lu J 2020 Nanostructural metallic materials: structures and mechanical properties Mater. Today 38 114–35

[32] [32] Wang M, Jiang Y B, Li Z, Xiao Z, Gong S, Qiu W T and Lei Q 2021 Microstructure evolution and deformation behaviour of Cu-10 wt%Fe alloy during cold rolling Mater. Sci. Eng. A 801 140379

[33] [33] Liu X M, Nakatani M, Gao H L, Sharma B, Pan H J, Fu Z R, Li X F, Ameyama K and Zhu X K 2021 Effect of staking fault energy on deformation mechanisms in Cu and Cu-30% Zn alloy with gradient structure obtained by SMAT J. Alloys Compd. 865 158863

[34] [34] Li C, Cui W F and Zhang Y S 2017 Surface self-nanocrystallization of α + β titanium alloy by surface mechanical grinding treatment Met. Mater. Int. 23 512–8

[35] [35] Lu K 2014 Making strong nanomaterials ductile with gradients Science 345 1455–6

[36] [36] Merchant M E 1945 Mechanics of the metal cutting process II. Plasticity conditions in orthogonal cutting J. Appl. Phys. 16 318–24

[37] [37] Oxley P L B 1989 The Mechanics of Machining: An Analytical Approach to Assessing Machinability (Chichester: Ellis Horwood Limited)

[38] [38] Malkin S and Guo C S 2008 Grinding Technology: Theory and Applications of Machining with Abrasives 2nd edn (New York: Industrial Press)

[39] [39] Yan L, Li X K, Jiang F, Zhou Z X and Rong Y M 2009 Research on microscopic grain-workpiece interaction in grinding through micro-cutting simulation, part 2: factorial study Adv. Mater. Res. 76–78 15–20

[40] [40] Ohbuchi Y and Obikawa T 2003 Finite element modeling of chip formation in the domain of negative rake angle cutting J. Eng. Mater. Technol. 125 324–32

[41] [41] Jin T 1999 Fundamental Research on High Efficiency Deep Grinding Technology (Shenyang: Northeastern University)

[42] [42] Bay B, Hansen N, Hughes D A and Kuhlmann-Wilsdorf D 1992 Overview no. 96 evolution of f.c.c. deformation structures in polyslip Acta Metall. Mater. 40 205–19

[43] [43] Hughes D A and Hansen N 1997 High angle boundaries formed by grain subdivision mechanisms Acta Mater. 45 3871–86

[44] [44] Zhang B and Shim V P W 2010 Effect of strain rate on microstructure of polycrystalline oxygen-free high conductivity copper severely deformed at liquid nitrogen temperature Acta Mater. 58 6810–27

[45] [45] YangMX,PanY,YuanFP,ZhuYTandWuXL2016Back stress strengthening and strain hardening in gradient structure Mater. Res. Lett. 4 145–51

[46] [46] Li W L, Tao N R and Lu K 2008 Fabrication of a gradient nano-micro-structured surface layer on bulk copper by means of a surface mechanical grinding treatment Scr. Mater. 59 546–9

[47] [47] Rowe W 2017 Temperatures in grinding—a review J. Manuf. Sci. Eng. 139 121001

[48] [48] Lu K, Lu L and Suresh S 2009 Strengthening materials by engineering coherent internal boundaries at the nanoscale Science 324 349–52

[49] [49] Lu L 2004 Ultrahigh strength and high electrical conductivity in copper Science 304 422–6

[50] [50] Laplanche G, Wieczorek N, Fox F, Berglund S, Pfetzing-Micklich J, Kishida K, Inui H and Eggeler G 2018 On the influence of crystallography and dendritic microstructure on micro shear behavior of single crystal Ni-based superalloys Acta Mater. 160 173–84

[51] [51] LuoJT,YuWL,XiCY,ZhangCXandMaCH2019 Preparation of ultrafine-grained GH4169 superalloy by high-pressure torsion and analysis of grain refinement mechanism J. Alloys Compd. 777 157–64

[52] [52] WuXL,JiangP,ChenL,ZhangJF,YuanFPandZhuYT 2014 Synergetic strengthening by gradient structure Mater. Res. Lett. 2 185–91

[53] [53] Fang T H, Li W L, Tao N R and Lu K 2011 Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper Science 331 1587–90