Opto-Electronic Engineering, Volume. 47, Issue 8, 190551(2020)

Layout-stiffness-correction force joint optimization of support system for ultra-large thin meniscus mirror

Xi Xinghua1,*... Zhang Chaojie1, Hu Haifei2,3 and Guan Yingjun1 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    References(15)

    [1] [1] Zhang L, Ye L, Zhang J P, et al. Gravity and support error separation of 1.2 m lightweight space mirror[J]. Acta Photonica Sinica, 2018, 47(7): 0722002.

    [3] [3] Hu H F, Luo X, Xin HW, et al. Layout optimization of equal-force supports for ultra-large optical fabrication[J]. Acta Optica Sinica, 2014, 34(4): 0422003.

    [5] [5] Dai X L. Study on the active control technology of a thin primary mirror[D]. Beijing: University of Chinese Academy of Sciences (Institute of Optics and Electronics, Chinese Academy of Sciences), 2018.

    [6] [6] Li H Z, Zhang Z D,Wang JL, et al. Active surface-profile correction of 620 mm thin-mirror based on flotation support[J]. Acta Optica Sinica, 2013, 33(5): 0511001.

    [7] [7] Zhu Y, Chen T, Wang J L, et al. Active correction of 1.23 m SiC mirror using bending mode[J]. Optics and Precision Engineering, 2017, 25(10): 2551–2563.

    [8] [8] Lan B,Wu X X,Li J F, et al. Influence of axial-force errors on the deformation of the 4 m lightweight mirror and its correction[J]. Applied Optics, 2017, 56(3): 611–619.

    [9] [9] Hu H F, Luo X, Liu Z Y, et al. Designing a hydraulic support system for large monolithic mirror’s precise in-situ testing-polishing iteration[J]. Optics Express, 2019, 27(3): 3746–3760.

    [10] [10] Chen F L, Zhang J X,Wu X X, et al. Deformation of thin primary mirror fitted with its vibration mode[J]. Infrared and Laser Engineering, 2011, 40(11): 2238–2243.

    [11] [11] Noethe L. Use of minimum-energy modes for modal-active optics corrections of thin meniscus mirrors[J]. Journal of Modern Optics, 1991, 38(6): 1043–1066.

    [12] [12] Fan L, Qiao B, Wang F G. Calibration of moment correction for thin mirror surface based on free harmonic vibration modal[J]. Journal of Changchun University of Science and Technology (Natural Science Edition), 2016, 39(3): 9–13.

    [13] [13] Nelson J E, Lubliner J, Mast T S. Telescope mirror supports: plate deflections on point supports[J]. Proceedings of SPIE, 1982, 332(12): 212–228.

    [14] [14] Hu H F, Zhao HW, Liu Z Y, et al. Hydrostatic support system for in-situ optical testing of a 4 m aperture SiC mirror[J]. Optics and Precision Engineering, 2017, 25(10): 2607–2613.

    [15] [15] Wang F G, Li H Z, Yang F. Ability of the thin mirror active optics to correct optical astigmatio[J]. Acta Photonica Sinica, 2010, 39(5): 871–875.

    Tools

    Get Citation

    Copy Citation Text

    Xi Xinghua, Zhang Chaojie, Hu Haifei, Guan Yingjun. Layout-stiffness-correction force joint optimization of support system for ultra-large thin meniscus mirror[J]. Opto-Electronic Engineering, 2020, 47(8): 190551

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Article

    Received: Sep. 19, 2019

    Accepted: --

    Published Online: Oct. 28, 2020

    The Author Email: Xinghua Xi (1973038493@qq.com)

    DOI:10.12086/oee.2020.190551

    Topics