[1] TUCKER M C. Progress in metal-supported solid oxide fuel cells: a review[D]. Journal of Power Sources, 195, 4570-4582(2010).

[2] ZHOU Y C, YE X F, WANG S R. All symmetrical metal supported solid oxide fuel cells[D]. Journal of Inorganic Materials, 31, 769-772(2016).

[3] HUI S, YANG D, Wang Z et al. Metal-supported solid oxide fuel cell operated at 400-600 ℃[D]. Journal of Power Sources, 167, 336-339(2007).

[4] ZHANG S L, YU H X, LI C X et al. Thermally sprayed high performance porous metal-supported solid oxide fuel cells with nanostructured La_0.6Sr_0.4Co_0.2Fe_0.8O₃ cathodes[D]. Journal of Materials Chemistry A, 4, 7461-7468(2016).

[5] ZHOU Y C, SONG S D, HAN M F. Development of metal- supported SOFC[D]. Engineering Sciences, 15, 28-32(2013).

[6] MORI M, YAMAMOTO T, ITOH H et al. Thermal expansion of nickel-zirconia anodes in solid oxide fuel cells during fabrication and operation[D]. Journal of Electrochemical Society, 145, 1374-1381(1998).

[7] WANG Y, JIANG W, LUO Y et al. Evolution of thermal stress and failure probability during reduction and reoxidation of solid oxide fuel cell[D]. Journal of Power Sources, 371, 65-76(2017).

[8] XIE J M, WANG F H. Thermal stress analysis of solid oxide fuel cell with anode functional layer[D]. Journal of Inorganic Materials, 32, 400-406(2017).

[9] SAIED M, AHMED K, AHMED M et al. Investigations of solid oxide fuel cells with functionally graded electrodes for high performance and safe thermal stress[D]. International Journal of Hydrogen Energy, 42, 15887-15902(2017).

[10] CELIK S, IBRAHIMOGLU B, MAT M et al. Micro level two dimensional stress and thermal analysis anode/electrolyte interface of a solid oxide fuel cell. International Journal of[D]. Hydrogen Energy., 40, 7895-7902(2015).

[11] CHARLAS B, FRANDSEN H L, BRODERSEN K et al. Residual stresses and strength of multilayer tape cast solid oxide fuel and electrolysis half-cells[D]. Journal of Power Sources, 288, 243-252(2015).

[12] VILLANOVA J, SICARDY O, FORTUNIER R et al. Determination of global and local residual stresses in SOFC by X-ray diffraction[D]. Nuclear Instruments and Methods in Physics Research B, 268, 282-286(2010).

[13] MALZBENDER J, STEINBRECH RW, SINGHEISER L. A review of advanced techniques for characterising SOFC behaviour[D]. Fuel Cells, 9, 785-793(2009).

[14] ZENG S M, PARBEY J, YU G S et al. Thermal stress analysis of sulfur deactivated solid oxide fuel cells[D]. Journal of Power Sources, 379, 134-143(2018).

[15] WANG K P, HUANG Y Y, CHANDRA A et al. Interfacial shear stress, peeling stress, and die cracking stress in trilayer electronic assemblies[D]. IEEE Transactions on Components and Packaging Technologies, 23, 309-316(2000).

[16] LIU L, KIM G Y, CHANDRA A. Modeling of thermal stresses and lifetime prediction of planar solid oxide fuel cell under thermal cycling conditions[D]. Journal of Power Sources, 195, 2310-2318(2010).

[17] CLAGUE R, MARQUIS A J, BRANDON N P. Finite element and analytical stress analysis of a solid oxide fuel cell[D]. Journal of Power Sources, 210, 224-232(2012).

[18] DAMM D L, FEDOROY A G. Reduced-order transient thermal modeling for SOFC heating and cooling[D]. Journal of Power Sources, 159, 956-967(2006).

[19] HAJIMOLANA S A, TONEKABONIMAOGHADAM S M, HUSSAIN M A et al. Thermal stress management of a solid oxide fuel cell using neural network predictive control[D]. Energy, 62, 320-329(2013).

[20] CHIANG L K, LIU H C, SHIU Y H et al. Thermo-electrochemical and thermal stress analysis for an anode-supported SOFC cell[D]. Renew Energy, 33, 2580-2588(2008).

[21] VAIDYA S, KIM J H. Finite element thermal stress analysis of solid oxide fuel cell cathode microstructures[D]. Journal of Power Sources, 225, 269-276(2013).

[22] ZENG S, XU M, PARBEY J et al. Thermal stress analysis of a planar anode-supported solid oxide fuel cell: effects of anode porosity[D]. Internal Journal of Hydrogen Energy, 42, 20239-20248(2017).

[23] LI K, WANG X, JIA L C et al. High performance Ni-Fe alloy support SOFCs fabricated by low cost tape casting-screen printing- cofiring process[D]. International Journal of Hydrogen Energy, 39, 19747-19752(2014).

[24] JU Y W, ETO H, INAGAKI T et al. Preparation of Ni-Fe bimetallic porous anode support for solid oxide fuel cells using LaGaO₃ based electrolyte film with high power density[D]. Journal of Power Sources, 195, 6294-6300(2010).

[25] ZHU T L, DU X J, BU Y F et al. Validation and electrochemical characterization of LSCF cathode deposition on metal supported SOFC[D]. Journal of the Electrochemical Society, 164, 1489-1494(2017).

[26] KONG Y, HUA B, PU J et al. A cost-effective process for fabrication of metal-supported solid oxide fuel cells[D]. International Journal of Hydrogen Energy, 35, 4592-4596(2010).

[27] WANG X, LI K, JIA L C et al. Porous Ni-Fe alloys as anode support for intermediate temperature solid oxide fuel cells: I. Fabrication, redox and thermal behaviors[D]. Journal of Power Sources, 277, 474-479(2015).

[28] LI K, JIA L C, WANG X et al. Methane on-cell reforming in nickel-iron alloy supported solid oxide fuel cells[D]. Journal of Power Sources, 284, 446-451(2015).

[29] LI K, JIA L C, WANG X et al. Enhanced methane steam reforming activity and electrochemical performance of Ni_0.9Fe_0.1- supported solid oxide fuel cells with infiltrated Ni-TiO₂ particles[D]. Scientific Reports, 6(2016).

[30] MENG L, WANG F Z, WANG A et al. High performance La_0.8Sr_0.2MnO₃-coated Ba_0.5Sr_0.5Co_0.8Fe_0.2O₃ cathode prepared by a novel solid-solution method for intermediate temperature solid oxide fuel cells[D]. Chinese Journal of Catalysis, 35, 38-42(2014).

[31] MOON H, KIM S, HYUN S et al. Development of IT-SOFC unit cells with anode-supported thin electrolytes via tape casting and co-firing[D]. International Journal of Hydrogen Energy, 33, 1758-1768(2008).

[32] MOLLA TT, BJØRK R, OLEVSKY E et al. Multi-scale modeling of shape distortions during sintering of bilayers[D]. Computational Materials Science, 88, 28-36(2014).