Researching | Efficient three-dimensional characterization of C/C composite reinforced with densely distributed fibers via X-ray phase-contrast microtomography

Chinese Optics Letters, Volume. 19, Issue 7, 073401(2021)

Efficient three-dimensional characterization of C/C composite reinforced with densely distributed fibers via X-ray phase-contrast microtomography

Ke Li^1,2,3, Yantao Gao¹, Haipeng Zhang^1,2,3, Guohao Du², Hefei Huang¹, Hongjie Xu^1、*, and Tiqiao Xiao^1,2,3、**

Author Affiliations

¹Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China

²Shanghai Synchrotron Radiation Facility/Zhangjiang Lab, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201204, China

³University of Chinese Academy of Sciences, Beijing 100049, China

show less

Full Text Get PDF

Figures&Tables (4)

References (30)

Paper Information

References(30)

[1] H. Xu, Z. Dai, X. Cai. Some physical issues of the thorium molten salt reactor nuclear energy system. Nucl. Phys. News, 24, 24(2014).

[2] Y. Gao, Y. Guan, K. Li, M. Liu, C. Zhang, J. Song. Failure behaviors of C/C composite tube under lateral compression loading. Nucl. Eng. Technol., 51, 1822(2019).

[3] D. Zhang, H. Xia, X. Yang, S. Feng, J. Song, X. Zhou. The influence of FLiNaK salt impregnation on the mechanical properties of a 2D woven C/C composite. J. Nucl. Mater., 485, 74(2017).

[4] M. Mehdikhani, L. Gorbatikh, I. Verpoest, S. V. Lomov. Voids in fiber-reinforced polymer composites: a review on their formation, characteristics, and effects on mechanical performance. J. Compos. Mater., 53, 1579(2019).

[5] S. Garcea, Y. Wang, P. Withers. X-ray computed tomography of polymer composites. Compos. Sci. Technol., 156, 305(2018).

[6] O. Coindreau, C. Mulat, C. Germain, J. Lachaud, G. L. Vignoles. Benefits of X-Ray CMT for the modeling of C/C composites. Adv. Eng. Mater., 13, 178(2011).

[7] B. Stojanovic, M. Babic, S. Mitrovic, A. Vencl, N. Miloradovic, M. Pantic. Tribological characteristics of aluminium hybrid composites reinforced with silicon carbide and graphite. A review. J. Balkan Tribolog. Assoc., 19, 83(2013).

[8] S. Matei, M. Stoicanescu, A. Crisan. Composites with short fibers reinforced epoxy resin matrix. Procedia Technol., 22, 174(2016).

[9] G. Pinto, A. Jiménez-Martín. Conducting aluminum-filled nylon 6 composites. Polym. Compos., 22, 65(2001).

[10] Y. Li, Z. Zhang, C. Den, Y. Su. Investigation of brazing structure of bulk graphite to a W-Re substrate. Mater. Charact., 44, 425(2000).

[11] S. Yuan, C. Zhang, M. Amin, H. Fan, M. Liu. Development of a cutting force prediction model based on brittle fracture for carbon fiber reinforced polymers for rotary ultrasonic drilling. Int. J. Adv. Manufact. Technol., 81, 1223(2015).

[12] O. Coindreau, G. Vignoles, P. Cloetens. Direct 3D microscale imaging of carbon–carbon composites with computed holotomography. Nucl. Instrum. Methods Phys. Res. Sec. B: Beam Inter. Mater. At., 200, 308(2003).

[13] G. L. Vignoles. Image segmentation for phase-contrast hard X-ray CMT of C/C composites. Carbon, 39, 167(2001).

[14] J. Martín-Herrero, C. Germain. Microstructure reconstruction of fibrous C/C composites from X-ray microtomography. Carbon, 45, 1242(2007).

[15] T. E. Gureyev, Y. I. Nesterets, A. W. Stevenson, P. R. Miller, S. W. Wilkins. Some simple rules for contrast, signal-to-noise and resolution in in-line x-ray phase-contrast imaging. Opt. Express, 16, 3223(2008).

[16] T. E. Gureyev, T. J. Davis, A. Pogany, S. C. Mayo, S. W. Wilkins. Optical phase retrieval by use of first Born- and Rytov-type approximations. Appl. Opt., 43, 2418(2004).

[17] T. Q. Xiao, A. Bergamaschi, D. Dreossi, R. Longo, A. Olivo, S. Pani, L. Rigon, T. Rokvic, C. Venanzi, E. Castelli. Effect of spatial coherence on application of in-line phase contrast imaging to synchrotron radiation mammography. Nucl. Instrum. Methods Phys. Res. Sec. A: Accel. Spectrom. Detect. Assoc. Equip., 548, 155(2005).

[18] B. L. Henke, E. M. Gullikson, J. C. Davis. X-ray interactions: photoabsorption, scattering, transmission and reflection E= 50–30,000 eV, Z= 1–92. At. Data Nucl. Data Tab., 54(1993).

[19] Y. Ren, C. Chen, R. Chen, G. Zhou, Y. Wang, T. Xiao. Optimization of image recording distances for quantitative X-ray in-line phase contrast imaging. Opt. Express, 19, 4170(2011).

[20] R. C. Chen, L. Rigon, R. Longo. Comparison of single distance phase retrieval algorithms by considering different object composition and the effect of statistical and structural noise. Opt. Express, 21, 7384(2013).

[21] R. Chen, P. Liu, T. Xiao, L. X. Xu. X-ray imaging for non-destructive microstructure analysis at SSRF. Adv. Mater., 26, 7688(2014).

[22] B. Feng, B. Deng, Y. Ren, Y. Wang, G. Du, H. Tan, Y. Xue, T. Xiao. Full-field x ray nano-imaging system designed and constructed at SSRF. Chin. Opt. Lett., 14, 093401(2016).

[23] R. Wang, Z. Fang, H. An, J. Xiong, Z. Xie, E. Guo, C. Wang, A. Lei, W. Wang. Double-spherically bent crystal high-resolution X-ray spectroscopy of spatially extended sources. Chin. Opt. Lett., 18, 061101(2020).

[24] J. Shi, T. Yao, M. Li, G. Yang, M. Wei, W. Shang, F. Wang. High efficiency X-ray diffraction diagnostic spectrometer with multi-curvature bent crystal. Chin. Opt. Lett., 18, 113401(2020).

[25] Y. Xi, B. Kou, H. Sun, J. Qi, J. Sun, J. Mohr, M. Borner, J. Zhao, L. X. Xu, T. Xiao, Y. Wang. X-ray grating interferometer for biomedical imaging applications at Shanghai Synchrotron Radiation Facility. J. Syn. Radiat., 19, 821(2012).

[26] R.-C. Chen, D. Dreossi, L. Mancini, R. Menk, L. Rigon, T.-Q. Xiao, R. Longo. PITRE: software for phase-sensitive X-ray image processing and tomography reconstruction. J. Syn. Radiat., 19, 836(2012).

[27] J. P. Lucas. Delamination fracture: effect of fiber orientation on fracture of a continuous fiber composite laminate. Eng. Fract. Mech., 42, 543(1992).

[28] O. Paris, H. Peterlik, D. Loidl, C. Rau, T. Weitkamp. Microcracks in carbon/carbon composites: a microtomography investigation using synchrotron radiation. Mat. Res. Soc. Symp. Proc., 678, EE3.8.1(2001).

[29] H.-X. Xu, J. Lin, Y.-J. Zhong, Z.-Y. Zhu, Y. Chen, J.-D. Liu, B.-J. Ye. Characterization of molten 2LiF–BeF2 salt impregnated into graphite matrix of fuel elements for thorium molten salt reactor. Nucl. Sci. Tech., 30, 74(2019).

[30] E. Weber, M. Fernandez, P. Wapner, W. Hoffman. Comparison of X-ray micro-tomography measurements of densities and porosity principally to values measured by mercury porosimetry for carbon–carbon composites. Carbon, 48, 2151(2010).

Cited By

[1] Giulio D’Emilia, Antonella Gaspari, Emanuela Natale, Davide Ubaldi. Uncertainty Evaluation in Vision-Based Techniques for the Surface Analysis of Composite Material Components. Sensors, 21, 4875(2021).

Tools

Get Citation

Copy Citation Text

Ke Li, Yantao Gao, Haipeng Zhang, Guohao Du, Hefei Huang, Hongjie Xu, Tiqiao Xiao, "Efficient three-dimensional characterization of C/C composite reinforced with densely distributed fibers via X-ray phase-contrast microtomography," Chin.Opt.Lett. 19, 073401 (2021)

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: X-ray Optics

Received: Sep. 19, 2020

Accepted: Dec. 5, 2020

Posted: Dec. 7, 2020

Published Online: Mar. 22, 2021

The Author Email: Hongjie Xu (xuhongjie@sinap.ac.cn), Tiqiao Xiao (xiaotiqiao@zjlab.org.cn)

DOI:10.3788/COL202119.073401

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology