[1] [1] YANG L. Advanced Optical Manufacture Technology［M］. Beijing: Science Press, 2001. (in Chinese)

[2] [2] XUE D L, ZHANG ZH Y, ZHANG X J. Computer controlled polishing technology for middle or small aspheric lens［J］. Opt. Precision Eng., 2005, 13(2): 198-204. (in Chinese)

[3] [3] JONES R A, RUPP W J. Rapid optical fabrication with computer controlled optical surfacing［J］. Optical Engineering, 1991, 30(12): 19.

[4] [4] JONES R A. Fabrication of a large, thin, off-axis aspheric mirror［J］. Optical Engineering, 1994, 33(12): 4067-4075.

[5] [5] JONES R A. Computer simulation of smoothing during computer-controlled optical polishing［J］. Applied Optics, 1995, 34(7): 1162-1169.

[6] [6] RUPP W, PLOTSKER V. Vacuum activated polishing laps produce smooth aspheric surfaces［J］. Applied Optics, 1993, 32(7): 1048-1050.

[7] [7] WANG P, CHEN Y, XUAN B, et al.. Polishing large aperture mirrors by manipulator［J］. Opt. Precision Eng., 2010, 18(5): 1077-1085. (in Chinese)

[8] [8] LI A M, DAI Y F, ZHENG Z W, et al.. Study on removing function of the polishing pad of dual-rotator mechanism［J］. China Mechanical Engineering, 2004, 15(23): 2077-2081. (in Chinese)

[9] [9] JONES R A. Computer-controlled optical surfacing with orbital tool motion［J］. Optical Engineering, 1986, 25(6): 785.

[10] [10] GRANADE S R, DRUEDING T W. Variation in material removal in Gaussian removal processes［J］. Optical Engineering, 1996, 35(11): 3267-3269.

[11] [11] CHEN H N, WANG J L, LI X L, et al.. Modelling and approximation of gaussian-like removal function in dual-rotor polishing technology of optics elements［J］. Acta Photonica Sinica, 2013, 42(3): 282-287. (in Chinese)

[12] [12] FAN CH, ZHAO J, ZHANG L, et al.. Modeling and experimental study on the material removal in the velocity-dwell-mode polishing process［J］. Journal of Mechanical Engineering, 2014, 50(5): 173-181. (in Chinese)

[13] [13] XU L, DING J T, MA Z, et al.. Kinematical analysis of one-axis polisher acting on spherical mirror［J］. Proceedings of SPIE, 2012, 8416: 84162H.

[14] [14] WU H J, CAO L X, LIU J. Analysis of kinematic geometry on face grinding process on lapping machines［J］. Chinese Journal of Mechanical Engineering, 2002, 38(6): 144-147. (in Chinese)

[15] [15] SHANG W J. Model building and simulation of computer control deterministic grinding and polishing［D］. Changsha: National University of Defense Technology, 2005. (in Chinese)

[16] [16] WANG Q D, LIU M C, ZHANG H X. Removing function of polishing pad in computer controlled optical polishing［J］. Optical Technique, 2000, 26(1): 32-34. (in Chinese)

[17] [17] LI X Y, WEI CH Y, XU W D, et al.. Tool influence function in aspheric polishing under dynamic pressure distribution［J］. Opt. Precision Eng., 2016, 24(12): 3061-3067. (in Chinese)

[18] [18] DAI Y F, SHANG W J, ZHOU X S. Effection of the material of a small tool to the removal function in computer control optical polishing［J］. Journal of National University of Defense Technology, 2006, 28(2): 97-101. (in Chinese)

[19] [19] LIU D F, CHEN T, CHEN G L, et al.. Material removal mechanism for fused glass by using soft particles［J］. Opt. Precision Eng., 2016, 24(7): 1623-1631. (in Chinese)