[1] [1] WANG H, WU J F, WU Y H, et al.. Micro/Nano technology and fine mechanics design of reaction flywheel systems for small satellites ［J］. Opt. Precision Eng., 2014, 22(2): 331-337.(in Chinese)

[2] [2] WEN T, FANG J CH. A feedback linearization control for the nonlinear 5-DOF flywheel suspended by the permanent magnet biased hybrid magnetic bearings ［J］. Acta Astronautica, 2012, 79: 131-139.

[3] [3] LIU Q, FANG J CH, HAN B CH. Novel electromagnetic repeated launch locking/unlocking device (RLLUD) based on self-locking for magnetic bearing flywheel ［J］. Sensors and Actuators A, 2012, 175: 116-126.

[4] [4] LIU Q, FANG J CH, HAN B CH. Vibration test and analysis of novel locking device for magnetic bearing flywheel ［J］. Journal of Vibration, Measurement & Diagnosis, 2012, 32(6): 926-930. (in Chinese)

[5] [5] LIVET J L, BRETAUDEAU M. Temporary locking device for inertia wheel: USA, 4345485 ［P］. 1982.

[6] [6] BEAU J F, GAUTHIER M. Kinetic wheel arrangement incorporating magnetic suspension provided with means for caging its rotor: USA, 4566740 ［P］. 1986.

[7] [7] GUELIS H V D, JOLY J L. Device for temporarily locking a rotor onto a stator: USA, 4872357 ［P］. 1989.

[8] [8] PRIVAT M, COSTA A D. Penumatic locking device for magnetic bearing reaction wheel ［C］. Proceeding of the 10th European Space Mechanisms and Tribology Symposium, San Sebastian, Spain, 2003: 1-8.

[9] [9] HAN B CH, LIU Q. Electromagnetic locking device based on self-locking for magnetic suspended flywheel ［J］. Opt. Precision Eng., 2009, 17(10): 2456-2464. (in Chinese)

[10] [10] LIU Q, FANG J CH, HAN B CH, et al.. Design and experiment of repeated electromagnetic locking device for magnetic bearing flywheel ［J］. Chinese Journal of Mechanical Engineering, 2012, 48(8): 12-20. (in Chinese)

[11] [11] ZHANG X Y, YAN X J, YANG Q L. Design and experimental research of a shape memory alloy space release device with segmented nut form ［J］. Chinese Journal of Mechanical Engineering, 2010, 46(17): 145-150. (in Chinese)

[12] [12] YAN X J, ZHANG X Y, NIE J X, et al.. Prototype SMA actuated locking device for small space magnetic bearing flywheels ［J］. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(2): 127-131. (in Chinese)

[13] [13] LIU Q, FANG J CH, HAN B CH, et al. Locking device for magnetic bearing flywheel and its optimization ［J］. Opt. Precision Eng., 2010, 18(8): 1814-1821. (in Chinese)

[14] [14] LIU Q, FANG J CH. Repeated clamping locking device for magnetic bearing flywheel ［J］. Opt. Precision Eng., 2012, 20(8): 1801-1810. (in Chinese)

[15] [15] TUNG P C, TSAI M T, CHEN K Y, et al.. Design of model-based unbalance compensator with fuzzy gain tuning mechanism for active magnetic bearing system ［J］. Expert System with Applications, 2011, 38: 12861-12868.

[16] [16] LIU Q, FANG J CH. Fretting behaviors of locking device for magnetically suspended flywheel during launch ［J］. Tribology, 2013, 33(2): 142-148. (in Chinese)

[17] [17] ZHU M H, CAI ZH B, LIN X ZH, et al.. Fretting wear behaviors of micro-arc oxidation coating sealed by grease ［J］. Wear, 2009, 267: 1-4.

[18] [18] NEU R W. Progress in standardization of fretting fatigue terminology and testing ［J］. Tribology International, 2011, 44: 1371-1377.