[1] NASIRI N A, PATRA N, NI N et al. Oxidation behaviour of SiC/SiC ceramic matrix composites in air[J]. Journal of the European Ceramic Society, 36, 3293-3302(2016).

[3] STAEHLER J M, ZAWADA L P. Performance of four ceramic-matrix composite divergent flap inserts following ground testing on an F110 turbofan engine[J]. Journal of the American Ceramic Society, 83, 1727-1738(2000).

[5] CHARLES H, HENAGER J, KURTZ R J. Low-activation joining of SiC/SiC composites for fusion applications[J]. Journal of Nuclear Materials, 417, 375-378(2011).

[6] LAMON J. A micromechanics-based approach to the mechanical behavior of brittle matrix composites[J]. Composites Science Technology, 61, 2259-2272(2001).

[7] REBILLAT F, LAMON J, NASLAIN R et al. Interfacial bond strength in SiC/C/SiC composite materials, as studied by single-fibre push-out tests[J]. Journal of American Ceramic Society, 81, 965-978(1998).

[8] SREEJITH K, VIPIN V, SUBRAMANIA S et al. A comparative study on C_f/PyC/SiC minicomposites prepared via CVI process for hypersonic engine application[J]. International Journal of Applied Ceramic Technology, 15, 1110-1123(2018).

[9] WINDISCH C F, HENAGER C, SPRINGER G D et al. Oxidation of the carbon interface in Nicalon fiber reinforced silicon carbide composite[J]. Journal of the American Ceramic Society, 80, 569-574(1997).

[10] SHI YING, ARAKI HIROSHI, YANG WEN et al. Influence of fiber pre-coating on mechanical properties and interfacial structures of SiC(f)/SiC composites[J]. Journal of Inorganic Materials, 16, 883-888(2001).

[11] OPILA E J, VERRILLI M J. Borosilicate glass-induced fiber degradation of SiC/BN/SiC composites exposed in combustion environments[J]. International Journal of Applied Ceramic Technology, 13, 434-442(2016).

[12] WING B L, HALLORAN J W. Subsurface oxidation of boron nitride coatings on silicon carbide fibers in SiC/SiC ceramic matrix composites[J]. Ceramics International, 44, 17499-17505(2018).

[13] NASLAIN R R, PAILLER R J F, LAMON J L. Single and multilayered interphases in SiC/SiC composites exposed to severe environmental conditions: an overview[J]. International Journal of Applied Ceramic Technology, 7, 263-275(2010).

[14] BERTRAND S, FORIO P, PAILLER R et al. Hi-Nicalon/SiC minicomposites with (pyrocarbon/SiC)_n nanoscale multilayered interphases[J]. Journal of the American Ceramic Society, 82, 2465-2473(1999).

[15] BERTRAND S, PAILLER R, LAMON J. SiC/SiC minicomposites with nanoscale multilayered fibre coatings[J]. Composites Science and Technology, 61, 363-367(2001).

[16] YU HAIJIAO, ZHOU XINGUI, ZHANG WEI et al. Mechanical behavior of SiC_f/SiC composites with alternating PyC/SiC multilayer interphases[J]. Materials and Design, 44, 320-324(2013).

[17] YANG M, ZHOU W C, LUO F et al. Effects of BN/SiC dual-layer interphase on mechanical and dielectric properties of SiC_f/SiC composites[J]. Ceramic International, 40, 3411-3418(2014).

[18] BERTRAND S, BOISRON O, PAILLER R et al. (PyC-SiC)_n and(BN-SiC) _n nano-scale multilayered interphases by pressure pulsed-CVI[J]. Key Engineering Materials, 165, 357-360(1999).

[19] AMJAD A, EMMANUEL M, SIVAKUMAR R et al. Effect of fiber content on single tow SiC minicomposite mechanical and damage properties using acoustic emission[J]. Journal of the European Ceramic Society, 35, 3389-3399(2015).

[20] LV X X, QI Z, JIANG Z Y et al. The Microstructure and Mechanical Properties of Silicon Carbide Fibers with Boron Nitride Interphase. IOP Conf[J]. Series: Materials Science and Engineering, 678, 012061(2019).

[21] WANG GUODONG, SONG YONGCAI. Enhancing mechanical property of SiC fiber by decreasing fiber diameter through a modified melt-spinning process[J]. Journal of Inorganic Materials, 33, 721-727(2018).

[22] MU Y, ZHOU W C, WANG C et al. Mechanical and electromagnetic shielding properties of SiC_f/SiC composites fabricated by combined CVI and PIP process[J]. Ceramics International, 40, 10037-10041(2014).