[2] [2] CAETANO H, FERREIRA G, RODRIGUES J P C, et al. Effect of the high temperatures on the microstructure and compressive strength of high strength fibre concretes［J］. Constr Build Mater, 2019, 199: 717-736.

[5] [5] CHEN M, GAO P, GENG F, et al. Mechanical and smart properties of carbon fiber and graphite conductive concrete for internal damage monitoring of structure［J］. Constr Build Mater, 2017, 142: 320-327.

[8] [8] SUN H, GUO G, MEMON S A, et al. Recycling of carbon fibers from carbon fiber reinforced polymer using electrochemical method［J］. Composites Part A: Appl Sci Manuf, 2015, 78: 10-17.

[9] [9] JAGADISH P R, KHALID M, LI L P, et al. Cost effective thermoelectric composites from recycled carbon fibre: From waste to energy［J］. J Cleaner Prod, 2018, 195: 1015-1025.

[10] [10] ZHANG J, CHEVALI V S, WANG H, et al. Current status of carbon fibre and carbon fibre composites recycling［J］. Composites Part B: Engineering, 2020, 193: 108053.

[11] [11] FANECA G, SEGURA I, TORRENTS J M, et al. Development of conductive cementitious materials using recycled carbon fibres［J］. Cem Concr Compos, 2018, 92: 135-144.

[12] [12] NGUYEN H, CARVELLI V, FUJII T, et al. Cement mortar reinforced with reclaimed carbon fibres, CFRP waste or prepreg carbon waste［J］. Constr Build Mater, 2016, 126: 321-331.

[13] [13] ANGELOV M, NASSIRI S, HASELBACH L, et al. Using carbon fiber composites for reinforcing pervious concrete［J］. Constr Build Mater, 2016, 126: 875-885.

[14] [14] FANECA G, SEGURA I, TORRENTS J M, et al. Development of conductive cementitious materials using recycled carbon fibres［J］. Cem Concr Compos, 2018, 92: 135-144.

[15] [15] WANG Y, ZHANG S, LI G, et al. Effects of alkali-treated recycled carbon fiber on the strength and free drying shrinkage of cementitious mortar［J］. J Cleaner Prod, 2019, 228: 1187-1195.

[16] [16] WANG Y, ZHANG S, LUO D, et al. Effect of chemically modified recycled carbon fiber composite on the mechanical properties of cementitious mortar［J］. Compos Part B: Eng, 2019, 173: 106853.

[20] [20] HAN B G, YU X, KWON E, et al. Effects of CNT concentration level and water/cement ratio on the piezoresistivity of CNT/cement composites［J］. J Compos Mater, 2012, 46(1): 19-25.

[21] [21] SASSANI A, CEYLAN H, KIM S, et al. Development of carbon fiber-modified electrically conductive concrete for implementation in Des Moines International Airport［J］. Case Studies Constr Mater, 2018, 8: 277-291.

[23] [23] ESPINOZA-MORENO C A, RODRIGUEZ-RODRIGUEZ M, Pellegrini-Cervantes M J, et al. Electrical percolation and fluidity of conductive recycled mortar cement: graphite powder: Recycled sand with addition of industrial waste carbon fiber［J］. Carbon Lett, 2021, 31(4): 707-720.

[29] [29] NELSON E B, KALOUSEK G L. Effects of Na2O on calcium silicate hydrates at elevated temperatures［J］. Cem Concr Res, 1977, 7(6): 687-694.

[30] [30] XI Y, GLASSER L S D. Hydrothermal study in the system Na2O-CaO-SiO2-H2O at 300 ℃［J］. Cem Concr Res, 1984, 14(5): 741-748.

[31] [31] Nocu-Wczelik W. Effect of Na and Al on the phase composition and morphology of autoclaved calcium silicate hydrates［J］. Cem Concr Res, 1999, 29(11): 1759-1767.

[32] [32] RAMACHANDRAN V S, BEAUDOIN J J, SARKAR S L, et al. Physico-chemical and microstructural investigations of the effect of NaOH on the hydration of 3CaO·SiO2［J］. Cement, 1993, 90: 73.

[33] [33] RICHARDSON I G. Tobermorite/jennite-and tobermorite/calcium hydroxide-based models for the structure of CSH: Applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, Portland cement, and blends of Portland cement with blast-furnace slag, metakaolin, or silica fume［J］. Cem Concr Res, 2004, 34(9): 1733-1777.