Optics and Precision Engineering, Volume. 26, Issue 7, 1698(2018)

Development and error analysis of metamorphic parallel manipulators

RONG Yu1...2,3, HAN Yong2, LIU Shuang-yong2, and QU Meng-ke13 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    References(24)

    [1] [1] XIONG Y L. Intelligent manufacturing[J]. Science and Technology Review, 2013, 31(10): 3. (in Chinese)

    [2] [2] CAI H G. Thoughts on the development of Chinas robot industry[J]. Integration Technology, 2015, 4(5): 1-4. (in Chinese)

    [3] [3] HUANG T, CHEN CH, WANG H. Identification of dynamic parameters of a novel 3-DOF spindle head[J]. Journal of Mechanical Engineering, 2013, 49(19): 31-39. (in Chinese)

    [6] [6] JAIME G A, ALBERT B S, EDUARDO C C. An application of screw theory to the kinematic analysis of a Delta-type robot[J]. Journal of Mechanical Science and Technology, 2014, 28(9): 3785-3792.

    [7] [7] HUANG T, LI Y, LI S W. Criteria for conceptual design of reconfigurable PKM modules theory and application[J]. Science in China, Ser.E, 2002, 32(5): 628-635. (in Chinese)

    [8] [8] LIU H T, HUANG T. Kinematic design of 5-DOF hybrid robot with large workspace/limb stroke ratio[J]. Journal of Mechanical Engineering, 2007, 43(6): 14-20. (in Chinese)

    [9] [9] LI B, HUANG T, LIU H T. Position analysis of a 3-DOF PKM module for a 5-DOF hybrid robot exechon[J]. China Mechanical Engineering, 2010, 21(11): 2785-2789. (in Chinese)

    [10] [10] LI M. Design Theory and Methodology of the TriVariant a 5-DOF Reconfigurable PKM Module[D]. Tianjin: Tianjin University, 2005: 29-55. (in Chinese)

    [11] [11] LIU H T. Unified Parameter Modeling of Lower Mobility Robotic Manupulators: Theory, Methodology and Application[D]. Tianjin: Tianjin University, 2010: 3-87. (in Chinese)

    [12] [12] LI Y B, JIN ZH L, JI SH M. Design of a novel 3-DOF hybrid mechanical arm[J]. Sci China Ser E-Tech Sci, 2009, 52(12): 3592-3600. (in Chinese)

    [13] [13] LI Y B. Analysis and Design of a Novel 6-DOF Hybrid Mechanical Arm[D]. Qinhuangdao: Yanshan University, 2009: 17-37. (in Chinese)

    [14] [14] JIN ZH L, CAO SH, GAO F. Arc spline tool path generation for triangular mesh surface machining[J]. China Mechanical Engineering, 2009, 20(14): 1639-1642. (in Chinese)

    [15] [15] LI Y B, JIN ZH L, JI SH M. Error analysis of a parallel anthropopathic shoulder[J]. China Mechanical Engineering, 2009, 17(3): 446-451. (in Chinese)

    [16] [16] WANG Y L, JIN ZH L, LI Y B. Dynamic modeling and robust-adaptive iterative learning control of 3-rrr spherical parallel mechanism[J]. Journal of Mechanical Engineering, 2010, 46(1): 68-73. (in Chinese)

    [17] [17] QIN L. Research on Modeling and Control for Space Robot System with Gravity Effect Consideration[D]. Qinhuangdao: Yanshan University, 2014: 11-77. (in Chinese)

    [18] [18] MENG ZH X, XIAO D F, YIN H. Mechanism error compensation method of parallel curve feeding platform[J]. Journal of Beijing Forestry University, 2016, 38(9): 95-101. (in Chinese)

    [19] [19] NZUE R M, BRETHE J F, VASSELIN E. Comparison of serial and parallel robot repeatability based on different performance criteria[J]. Mechanism and Machine Theory, 2013, 40(7): 136-155.

    [20] [20] HOU Y L, DUAN Y B, DOU Y CH. Calibration of adjusting mechanism for sub reflector of a 65 meters radio telescope[J]. China Mechanical Engineering, 2013, 24(12): 3318-3328. (in Chinese)

    [21] [21] CHANAL H, DUC E, HASCOET J Y. Reduction of a parallel kinematics machine tool inverse kinematics model with regard to machining behaviour[J]. Mechanism and Machine Theory, 2009, 44(7): 1371-1385.

    [22] [22] HUANG ZH, ZHAO Y SH, ZHAO T SH. Advanced Spatial Mechanism[M]. Beijing: Higher Education Press, 2006: 277-283. (in Chinese)

    [23] [23] ZENG D X, HUANG Z. Type synthesis of the rotationaldecoupledparallel mechanism based on screwtheory[J]. Sci China Tech Sci, 2011, 41(5): 585-591.(in Chinese)

    [24] [24] DANG P F. Research on the Kinematic Accuracy and Parameter Identification Method of Parallel Kinematic Machine[D]. Shenyang: Northeastern University, 2015: 1-17. (in Chinese).

    CLP Journals

    [1] ZHAO Yu-ming, JIN Zhen-lin. Inverse dynamics modeling of 3-RPS/3n-SPS parallel mechanism with redundant limbs[J]. Optics and Precision Engineering, 2019, 27(4): 807

    Tools

    Get Citation

    Copy Citation Text

    RONG Yu, HAN Yong, LIU Shuang-yong, QU Meng-ke. Development and error analysis of metamorphic parallel manipulators[J]. Optics and Precision Engineering, 2018, 26(7): 1698

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Aug. 9, 2017

    Accepted: --

    Published Online: Oct. 2, 2018

    The Author Email:

    DOI:10.3788/ope.20182607.1698

    Topics