[1] [1] RIED P, LORENZ C, BRNSTRUP A, et al. Processing of YSZ screen printing pastes and the characterization of the electrolyte layers for anode supported SOFC[J]. J Eur Ceram Soc, 2008, 28(9): 1801-1808.

[4] [4] SRIVASTAVA P, QUACH T, DUAN Y, et al. Electrode supported solid oxide fuel cells: Electrolyte films prepared by DC magnetron sputtering[J]. Solid State Ion, 1997, 99(3/4): 311-319.

[5] [5] WILLIAMS M C, STRAKEY J P, SINGHAL S C. US distributed generation fuel cell program[J]. J Power Sources, 2004, 131(1/2): 79-85.

[6] [6] NOH H S, SON J W, LEE H, et al. Low temperature performance improvement of SOFC with thin film electrolyte and electrodes fabricated by pulsed laser deposition[J]. J Electrochem Soc, 2009, 156(12): B1484.

[7] [7] GAO J T, LI J H, WANG Y P, et al. Performance and Stability of Plasma-Sprayed 10×10 cm2 Self-sealing Metal-Supported Solid Oxide Fuel Cells[J]. J Therm Spray Technol, 2021, 30(4): 1059-1068.

[8] [8] YANG S F, TSAI C H, CHANG C L, et al. Performance and Thermal Properties of Ni/Mo Metal-Supported Solid Oxide Fuel Cell[J]. ECS Trans, 2019, 91(1): 963.

[9] [9] LI C X, LI C J, GUO L J. Effect of composition of NiO/YSZ anode on the polarization characteristics of SOFC fabricated by atmospheric plasma spraying[J]. Int J Hydrogen Energy, 2010, 35(7): 2964-2969.

[10] [10] WHITE B, KESLER O, ROSE L. Air plasma spray processing and electrochemical characterization of SOFC composite cathodes[J]. J Power Sources, 2008, 178(1): 334-343.

[11] [11] STOERMER A O, RUPP J L, GAUCKLERL J. Spray pyrolysis of electrolyte interlayers for vacuum plasma-sprayed SOFC[J]. Solid State Ion, 2006, 177(19-25): 2075-2079.

[12] [12] MARCANO D, MAUER G, VASEN R, et al. Manufacturing of high performance solid oxide fuel cells (SOFCs) with atmospheric plasma spraying (APS) and plasma spray-physical vapor deposition (PS-PVD)[J]. Surf Coat Technol, 2017, 318: 170-177.

[13] [13] LI CJ, LI CX, XING YZ, et al. Influence of YSZ electrolyte thickness on the characteristics of plasma-sprayed cermet supported tubular SOFC[J]. Solid State Ion, 2006, 177(19-25): 2065-2069.

[14] [14] LI C J, OHMORI A. The lamellar structure of a detonation gun sprayed Al2O3 coating[J]. Surf Coat Technol, 1996, 82(3): 254-258.

[15] [15] OKUMURA K, AIHARA Y, ITO S, et al. Development of thermal spraying-sintering technology for solid oxide fuel cells[J]. J Therm Spray Technol, 2000, 9(3): 354-359.

[16] [16] LI C X, LI C J, YANG G J. Development of a Ni/Al2O3 cermet-supported tubular solid oxide fuel cell assembled with different functional layers by atmospheric plasma-spraying[J]. J Therm Spray Technol, 2009, 18(1): 83-89.

[17] [17] KHOR K A, YU L G, CHAN S H, et al. Densification of plasma sprayed YSZ electrolytes by spark plasma sintering (SPS)[J]. J Eur Ceram Soc, 2003, 23(11): 1855-1863.

[18] [18] XING Y Z, LI C J, LI C X, et al. Influence of through-lamella grain growth on ionic conductivity of plasma-sprayed yttria-stabilized zirconia as an electrolyte in solid oxide fuel cells[J]. J Power Sources, 2008, 176(1): 31-38.

[19] [19] WANG Y P, LIU S H, ZHANG H Y, et al. Structured La0.6Sr0.4Co0.2Fe0.8O3-δ cathode with large-scale vertical cracks by atmospheric laminar plasma spraying for IT-SOFCs[J]. J Alloys Compd, 2020, 825: 153865.

[22] [22] ZHANG S, LI C, LI C, et al. Scandia-stabilized zirconia electrolyte with improved interlamellar bonding by high-velocity plasma spraying for high performance solid oxide fuel cells[J]. J Power Sources, 2013, 232: 123-131.

[23] [23] YANG E J, LUO X T, YANG G J, et al. Epitaxial grain growth during 8YSZ splat formation on polycrystalline YSZ substrates by plasma spraying[J]. Surf Coat Technol, 2015, 274: 37-43.

[24] [24] MIRAHMADI A, VALEFI K. Densification of plasma sprayed SOFC electrolyte layer through infiltration with aqueous nitrate solution[J]. J Fuel Cell Sci Technol, 2012, 9(1): 8-11.

[25] [25] YANG G J, LI C X, HAO S, et al. Critical bonding temperature for the splat bonding formation during plasma spraying of ceramic materials[J]. Surf Coat Technol, 2013, 235: 841-847.

[26] [26] ZHANG S, LI C, LI C. Plasma-Sprayed Y2O3-Stabilized ZrO2 Electrolyte With Improved Interlamellar Bonding for Direct Application to Solid Oxide Fuel Cells[J]. J Fuel Cell Sci Technol, 2014, 11(3): 031005.

[27] [27] YANG G J, LI C X, HAO S, et al. Critical bonding temperature for the splat bonding formation during plasma spraying of ceramic materials[J]. Surf Coat Technol, 2013, 235: 841-847.

[29] [29] OLIVER W C, PHARR G M. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology[J]. J Mater Res, 2004, 19(1): 3-20.

[30] [30] ZHU L N, XU B S, WANG H D, et al. Determination of hardness of plasma-sprayed FeCrBSi coating on steel substrate by nanoindentation[J]. Mater Sci Eng A, 2010, 528(1): 425-428.

[32] [32] BASU R, KUMAR S S, MUKHOPADHYAY A K, et al. Improvement in mechanical properties of anode-supported planar SOFC[J]. ECS Trans, 2007, 7(1): 533.

[33] [33] MORALES M, ROA J J, CAPDEVILA X, et al. Mechanical properties at the nanometer scale of GDC and YSZ used as electrolytes for solid oxide fuel cells[J]. Acta Mater, 2010, 58(7): 2504-2509.

[34] [34] ROA J, RUIZ‐MORALES J, CANALES‐VZQUEZ J, et al. Mechanical characterisation at nanometric scale of a new design of SOFCs[J]. Fuel Cells, 2011, 11(1): 124-130.

[35] [35] LANG M, HENNE R, SCHAPER S, et al. Development and characterization of vacuum plasma sprayed thin film solid oxide fuel cells[J]. J Therm Spray Technol, 2001, 10(4): 618-625.

[36] [36] LAKSHMI V V, BAURI R, GANDHI A S, et al. Synthesis and characterization of nanocrystalline ScSZ electrolyte for SOFCs[J]. Int J Hydrogen Energy, 2011, 36(22): 14936-14942.

[37] [37] GUPTA M, WEBER A, MARKOCSAN N, et al. Electrochemical performance of plasma sprayed metal supported planar solid oxide fuel cells[J]. J Electrochem Soc, 2016, 163(9): F1059.