[1] [1] BUSWELL R A, LEAL DE SILVA W R, JONES S Z, et al. 3D printing using concrete extrusion: A roadmap for research[J]. Cem Concr Res, 2018, 112: 37-49.

[2] [2] LOWKE D, DINI E, PERROT A, et al. Particle-bed 3D printing in concrete construction - Possibilities and challenges[J]. Cem Concr Res, 2018, 112: 50-65.

[3] [3] PAOLINI A, KOLLMANNSBERGER S, RANK E. Additive manufacturing in construction: A review on processes, applications, and digital planning methods[J]. Addit Manuf, 2019, 30: 100894.

[4] [4] LIU J L, NGUYEN-VAN V, PANDA B, et al. Additive manufacturing of sustainable construction materials and form-finding structures: A review on recent progresses[J]. 3D Print Addit Manuf, 2022, 9(1): 12-34.

[5] [5] DELGADO CAMACHO D, CLAYTON P, O'BRIEN W J, et al. Applications of additive manufacturing in the construction industry - A forward-looking review[J]. Autom Constr, 2018, 89: 110-119.

[6] [6] WENG Y W, LI M Y, RUAN S Q, et al. Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach[J]. J Clean Prod, 2020, 261: 121245.

[7] [7] DE SCHUTTER G, LESAGE K, MECHTCHERINE V, et al. Vision of 3D printing with concrete—Technical, economic and environmental potentials[J]. Cem Concr Res, 2018, 112: 25-36.

[8] [8] MECHTCHERINE V, NERELLA V N, WILL F, et al. Large-scale digital concrete construction - CONPrint3D concept for on-site, monolithic 3D-printing[J]. Autom Constr, 2019, 107: 102933.

[9] [9] ZHANG Y, ZHANG Y S, SHE W, et al. Rheological and harden properties of the high-thixotropy 3D printing concrete[J]. Constr Build Mater, 2019, 201: 278-285.

[10] [10] LE T T, AUSTIN S A, LIM S, et al. Hardened properties of high-performance printing concrete[J]. Cem Concr Res, 2012, 42(3): 558-566.

[11] [11] ARUNOTHAYAN A R, NEMATOLLAHI B, RANADE R, et al. Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction[J]. Constr Build Mater, 2020, 257: 119546.

[12] [12] LIU C, WANG X G, CHEN Y N, et al. Influence of hydroxypropyl methylcellulose and silica fume on stability, rheological properties, and printability of 3D printing foam concrete[J]. Cem Concr Compos, 2021, 122: 104158.

[14] [14] WANG Hailong, YIN Wenwen, CHENG Xudong, et al. J Hydraul Eng, 2019, 50(2): 225-232.

[15] [15] YU Z P, TANG R, LIU G Q, et al. Experimental study on dynamic performance of plain concrete and lightweight aggregate concrete under uniaxial loading[J]. J Mater Civ Eng, 2021, 33(9): 04021217.

[17] [17] WANG Li, WANG Bolin, BAI Gang, et al. J Exp Mech, 2020, 35(2): 243-250.