Optics and Precision Engineering, Volume. 28, Issue 7, 1528(2020)

Formation mechanism and suppression method of hole edge damage in drilling optical glass

MA Li-jie*... LIU Hong-wen, QU Hai-tao, WANG Zhan-kui and SU Jian-xiu |Show fewer author(s)
Author Affiliations
  • [in Chinese]
  • show less
    References(31)

    [4] [4] JIA P, ZHOU M. Tool wear and its effect on surface roughness in diamond cutting of glass soda-lime [J]. Chinese Journal of Mechanical Engineering, 2012, 25(6): 1224-1230.

    [5] [5] ZHOU M, JIA P, LI M. Research on the influence of cutting fluids on the critical depth of cut in diamond cutting of optical glass BK7 [J]. Key Engineering Materials, 2010, 431-432: 126-129.

    [6] [6] ZHOU M, JIA P. Effect of cutting fluid on machinability of optical glass SF6 in diamond cutting [J]. Nanotechnology and Precision Engineering, 2011, 09(4): 350-356. (in Chinese)

    [7] [7] JIANG C, XU J, WANG C. Experimental investigation of subsurface damage of optical glass in precision grinding using a brittle material removal fraction [J]. The International Journal of Advanced Manufacturing Technology, 2017, 90(4): 725-730.

    [8] [8] YAO Z, GU W, LI K. Relationship between surface roughness and subsurface crack depth during grinding of optical glass BK7 [J]. Journal of Materials Processing Technology, 2012, 212(4): 969-976.

    [9] [9] YU T, LI H, WANG W. Experimental investigation on grinding characteristics of optical glass BK7: with special emphasis on the effects of machining parameters [J]. International Journal of Advanced Manufacturing Technology, 2016, 82(5-8): 1405-1419.

    [10] [10] LI J, GAO P, ZHU Y W, et al.. Research on subsurface damage after abrasives and fixed-abrasive lapping of K9 glass [J]. Key Engineering Materials, 2011, 487: 253-256.

    [11] [11] GAO P, LI J, ZHU Y W, et al.. Study on subsurface damage after fixed-abrasive lapping with different particle size [J]. Solid State Phenomena, 2011, 175: 112-115.

    [12] [12] LIN K, ZHU Y W, LI J, et al.. Experimental study on the polishing process of K9 optical glass with consolidated abrasive [J]. Laser & Optoelectronics Progress, 2010, 47(4): 90-95. (in Chinese)

    [13] [13] PAL R K, GARG H, SAREPAKA R V, et al.. Experimental investigation of material removal and surface roughness during optical glass polishing [J]. Materials and Manufacturing Processes, 2015, 31(12): 1613-1620.

    [14] [14] FAN J L. Study on Material Removal Mechanism of Consolidated Abrasive Polishing Optical Glass [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2012. (in Chinese)

    [15] [15] L D, ZHANG Y, PENG Y. High-frequency vibration effects on hole entrance chipping in rotary ultrasonic drilling of BK7 glass [J]. Ultrasonics, 2016, 72: 47-56.

    [17] [17] WANG J, FENG P, ZHANG J, et al.. Modeling the dependency of edge chipping size on the material properties and cutting force for rotary ultrasonic drilling of brittle materials [J]. International Journal of Machine Tools & Manufacture, 2016, 101: 18-27.

    [19] [19] ZHANG Q H, ZHANG J H, JIA Z X, et al.. Material-removal-rate analysis in the ultrasonic machining of engineering ceramics [J]. Journal of Materials Processing Technology, 1999, 88(1-3): 180-184.

    [20] [20] REN J X, KANG R K, WANG X B, et al.. Grinding Technology of Hard to Machine Materials [M]. Beijing: Publishing House of Electronics Industry, 2011. (in Chinese)

    [21] [21] WANG J, FENG P, ZHANG J, et al.. Modeling the dependency of edge chipping size on the material properties and cutting force for rotary ultrasonic drilling of brittle materials [J]. International Journal of Machine Tools and Manufacture, 2015, 101: 18-27.

    [22] [22] LAMBROPOULOS J C, JACOBS S D, RUCKMAN J. Material removal mechanisms from grinding to polishing [J]. Ceram Trans. 1999, (102): 113-128.

    [23] [23] KUMABE J. PreciSion Machining Vibration Cutting (Foundation and Application) [M]. Beijing: Mechanical Industry Press, 1985. (in Chinese)

    [24] [24] VIKAS K, HARI S. Rotary ultrasonic drilling of silica glass BK-7: Microstructural investigation and process optimization through TOPSIS [J]. Silicon, 2018, 11(1): 471-485.

    [25] [25] ABDELKAWY A, HOSSAM M, EL-HOFY H. Experimental investigation of surface and geometrical characteristics of rotary ultrasonic drilling of soda glass [J]. Machining Science and Technology, 2019, 23(3): 385-406.

    [26] [26] WANG J, FENG P, ZHENG J, et al.. Improving hole exit quality in rotary ultrasonic machining of ceramic matrix composites using a compound step-taper drill [J]. Ceramics International, 2016, 42(12): 13387-13394.

    [27] [27] MAO L, ZOU P, WANG W, et al.. Analysis of intermittent cutting characteristics in ultrasonic vibration drilling [J].Electromachining & Mould, 2018(5): 53-56. (in Chinese)

    [28] [28] LV D X. Study on High Frequency Vibration Effect of Rotary Ultrasonic Machining of Hard and Brittle Materials [D]. Harbin: Harbin Institute of Technology, 2014. (in Chinese)

    [29] [29] ZHAO J H, SUN CH W, DUAN Z P, et al.. Research progress of failure wave in brittle materials such as glass under impact compression [J].Progress in Physics, 2001(2): 157-175. (in Chinese)

    [30] [30] HU F, XIE L, XIANG J, et al.. Finite element modelling study on small-hole peck drilling of SiCp/Al composites [J]. The International Journal of Advanced Manufacturing Technology, 2018, 96(9-12): 3719-3728.

    [31] [31] ELTAGGAZ A D I. Comparison of between direct and peck drilling for large aspect ratio in Ti-6Al-4V alloy [J]. The International Journal of Advanced Manufacturing Technology, 2019, 102(9/12): 2797-2805.

    Tools

    Get Citation

    Copy Citation Text

    MA Li-jie, LIU Hong-wen, QU Hai-tao, WANG Zhan-kui, SU Jian-xiu. Formation mechanism and suppression method of hole edge damage in drilling optical glass[J]. Optics and Precision Engineering, 2020, 28(7): 1528

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Nov. 17, 2019

    Accepted: --

    Published Online: Nov. 2, 2020

    The Author Email: Li-jie MA (ma_lj@hist.edu.cn)

    DOI:10.37188/ope.20202807.1528

    Topics