High Power Laser Science and Engineering, Volume. 7, Issue 3, 03000e37(2019)
ARCTURUS laser: a versatile high-contrast, high-power multi-beam laser system
Fig. 1. Schematic of the double-CPA architecture of the ARCTURUS laser system.
Fig. 2. SEQUOIA measurements of the ARCTURUS laser system showing the effect of different optical elements on the contrast improvement. The traces in (a) show the effect of the SA in the booster amplifier in a single-CPA configuration. In (b), a series of measurements indicates the influence of the XPW module and the effect of the regen 2 SA on the contrast enhancement in the double-CPA configuration. The traces in (c) show the present contrast quality for all three beams: both HP pulses (beam 1 and beam 2) and the probe beam.
Fig. 3. (a) Wizzler measurements of the spectrum, spectral phase and (b) temporal profile close to the peak of the pulse for both HP beams after the compression, corresponding to the Dazzler configuration for the shortest pulse duration of beam 2. The compressor optical arrangement is drawn schematically in (c) and a picture of the vacuum probe compressor is shown in (d).
Fig. 4. 2D and 3D intensity distributions of beam 1 focused by an
Fig. 5. (a) Schematic of the plasma mirror at the ARCTURUS laser system. Two parabolas are used to focus the laser beam onto a multi-layer substrate and to recollimate it after the mirror. (b) Photo of the plasma mirror (PM) situated directly after the beam 1 compressor (CP1) of the ARCTURUS laser. Mirrors TM1 and TM2 can be driven out of the beam path so that the PM can be bypassed. (c) Transmission of the plasma mirror for different laser intensities at the PM substrate, from two series of measurements.
Fig. 6. SEQUOIA traces for the laser beam contrast with (blue) and without (black) the PM system inserted in the beam line. The red dashed line is the estimated contrast of the PM. The inset shows a detail of the temporal profile close to the main peak within the interval
Fig. 7. (a) Drawing of the shielded experimental hall. The main interaction beams, beam 1 (blue) and beam 2 (green), can be guided to the target chambers 1 and 2. In addition, beam 2 can be transported to a third chamber. The probe beam transport lines are shown in orange and guide the probe to any of the main chambers. The radiation shielding walls are marked in gray. (b) Pointing stability of focal spots of the HP beams 1 and 2 in target chamber 2 recorded over 20 consecutive shots.
Fig. 8. Raw spectrum of the high-order harmonics generated by a laser-irradiated grating target of periodicity
Fig. 9. (a) Experimental setup of the frequency up-conversion of a laser beam (
Fig. 10. Experimental setup for proton probing of a charge pulse. Two beams (probing beam and interaction beam) can be used to probe the interaction and to generate a charge pulse, respectively. The particular folding of the wire allows the observation of a larger field of view.
Get Citation
Copy Citation Text
M. Cerchez, R. Prasad, B. Aurand, A. L. Giesecke, S. Spickermann, S. Brauckmann, E. Aktan, M. Swantusch, M. Toncian, T. Toncian, O. Willi. ARCTURUS laser: a versatile high-contrast, high-power multi-beam laser system[J]. High Power Laser Science and Engineering, 2019, 7(3): 03000e37
Category: Research Articles
Received: Mar. 12, 2019
Accepted: May. 13, 2019
Published Online: Jul. 8, 2019
The Author Email: M. Cerchez (mirela.cerchez@hhu.de)