[1] [1] MAROM R, AMALRAJ S, LEIFER N. A review of advanced and practical lithium battery materials［J］. J Mater Chem, 2011, 21: 9938-9954.

[3] [3] GIRISHKUMAR G, MCCLOSKEY B, LUNTZ A C, et al. Lithium-air battery promise and challenges［J］. J Phys Chem Lett, 2010, 1(14): 2193-2203.

[5] [5] YANG X L, WANG Y, CAO H K, et al. Research progress of high voltage electrolyte for lithium ion battery［J］. Power Supply Technol, 2012, 36(8):1235-1238.

[6] [6] HUANG S H, WEN Z Y, ZHANG J C, et al. Li4Ti5O12/Ag composite as electrode materials for lithium-ion battery［J］. Solid State Ionics, 2006, 177(9/10): 851-855.

[7] [7] YANG Z, CHOI D, KERISIT S, et al. Nanostructures and lithium electrochemical reactivity of lithium titanites and titanium oxides A review［J］. J Power Sources, 2009, 192(2): 588-598.

[9] [9] TAN Y, XUE B. Research progress on lithium titanate as anode material in lithium-ion battery［J］. J Inorg Mater, 2018, 33(5): 475-482.

[10] [10] Park K S, BENAYAD A, KANG D J, et al. Nitridation-driven conductive Li4Ti5O12 for lithium ion batteries［J］. J Am Chem Soc, 2008, 130(45): 14930-14931.

[11] [11] CHENG L, LI X L, LIU H J, et al. Carbon-coated Li4Ti5O12 as a high rate electrode material for Li-ion intercalation［J］. J Electr Chem Soc, 2007, 154(7): A692-A697.

[12] [12] KIM S, ALAUZUN J G, LOUVAIN N, et al. Alginic acid aqua gel as a template and carbon source in the synthesis of Li4Ti5O12/C nanocomposites for application as anodes in Li-ion batteries［J］. RSC Adv, 2018, 57(8): 32558-32564.

[13] [13] ZHU J, ZHANG Y. Hydrothermal synthesis of Li4-xNaxTi5O12 and Li4-xNaxTi5O12/graphene composites as anode materials for lithium-ion batteries［J］. MATEC Web of Conferences, 2016, 65: 02008.

[14] [14] LI X Y. Study on preparation and Doping Modification of Lithium Titanate (Dissertation, in Chinese). Guizhou: Guizhou University, 2019.

[15] [15] ARIYOSHI K, OHZUKU T. Conceptual design for 12 V “lead-free” accumulators for automobile and stationary applications［J］. J Power Sources, 2007, 174(2): 1258-1262.

[17] [17] YU Q, HUANG H, CHEN R, et al. Synthesis of CuO nano walnuts and nanoribbons from aqueous solution and their catalytic and electrochemical properties［J］. Nanoscale, 2012, 4(8): 2613-2620.

[18] [18] BABU B V, BABU K V, AREGAI G T, et al. Structural and electrical properties of Li4Ti5O12 anode material for lithium-ion batteries［J］. Results Phys, 2018(9): 284-289.

[19] [19] LI Y, ZHAO H L, TIAN Z H, et al. Heat treatment effect on electrochemical properties of spinel Li4Ti5O12［J］. Rare Metals, 2008, 27(2): 165-169.

[20] [20] WANG M, ZHANG X M, WANG Y B, et al. Preparation and Electrochemical Performance of Mg2+ Doped Li4Ti5O12 Anode Materials for Lithium-Ion Batteries［J］. Mater Sci Forum, 2019, 960: 238-243.

[21] [21] CHEN C, ZHANG X, ZHOU Y, et al. Preparation and characterization of nanocrystalline Li4Ti5O12 by sol-gel method［J］. Mater Chem Phys, 2002, 78(2): 437-441.

[22] [22] HAO Y J, LAI Q Y, LIU D Q, et al. Synthesis by citric acid sol-gel method and electrochemical properties of Li4Ti5O12 anode material for lithium-ion battery［J］. Mater Chem Phys, 2005, 94(2/3): 382-387.

[23] [23] SHEN L F, YUAN C Z, LUO H J, et al. Facile synthesis of hierarchically porous Li4Ti5O12 microspheres for high rate lithium ion batteries［J］. J Mater Chem, 2010, 20(33): 6998-7004.

[24] [24] TANG Y F, YANG L, FANG S H, et al. Li4Ti5O12 hollow microspheres assembled by nanosheets as an anode material for high-rate lithium ion batteries［J］. Electrochim Acta, 2009, 54 (26): 6244-6249.

[25] [25] WANG M, HUANG J T, CHENG L L, et al. Preparation and Electrochemical Performance of Li4Ti5O12@C Composites for Negative Electrode of Lithium-ion Battery［J］. Mater Reports (in Chinese), 2020, 34: 01019.

[26] [26] LI F Y, MIN Z, JING L, et al. Preparation and electrochemical performance of Mg-doped Li4Ti5O12 nanoparticles as anode materials for lithium-ion batteries［J］. Int J Electrochem Sci, 2015, 10(12): 445-453.

[27] [27] KANG E, JUNG Y S, KIM G H, et al. Highly improved rate capability for a lithium-ion battery nano-Li4Ti5O12 negative electrode via carbon-coated mesoporous uniform pores with a simple self-assembly method ［J］. Adv Funct Mater, 2011, 21: 4349-4357.

[28] [28] XIA X, ZHAN J, ZHONG Y, et al. Single-crystalline, metallic TiC nanowires for highly robust and wide-temperature electrochemical energy storage［J］. Small, 2017, 13: 6810-6829.

[29] [29] WANG M H, ISLAM S, SONG J, et al. Carbon-coated rhombohedral Li2NaV2(PO4)3, nanoflake cathode for Li-ion battery with excellent cycle ability and rate capability［J］. Chem Phys Lett, 2017, 681: 44-49.

[30] [30] BOUKAMP B A, LESH G C, HUGGINS R A. Chem inform abstract: all-soled lithium electrodes with mixed-conductor matrix［J］. Chem Inform Sdienst, 1981, 128(4): 125-129.

[31] [31] CHENG X L, LI H J, LIU H M. Carbon-coated Li4Ti5O12 as a high rate electrode material for Li-ion intercalation ［J］. J Electrochem Soc, 2007, 154: A692-A697.

[32] [32] NUGROHO A, KIM S J, CHUNG K Y, et al. Synthesis of Li4Ti5O12 in supercritical water for Li-ion batteries: reaction mechanism and high-rate performance［J］. Electrochim Acta, 2012, 78: 623-632.