[1] H SU, A MARIANI, S E OVUR et al. Toward teaching by demonstration for robot-assisted minimally invasive surgery. IEEE Transactions on Automation Science and Engineering, 18, 484-494(2021).

[2] [2] 2段星光， 温浩， 何睿， 等. 胸腹腔经皮穿刺机器人研究进展及关键技术分析［J］. 机器人， 2021， 43（5）： 567-584. doi: 10.13973/j.cnki.robot.200585DUANX G， WENH， HER， et al. Advances and key techniques of percutaneous puncture robots for thorax and abdomen［J］. Robot， 2021， 43（5）： 567-584.（in Chinese）. doi: 10.13973/j.cnki.robot.200585

[3] W ZHANG, P XIA, S LIU et al. A coordinate positioning puncture method under robot-assisted CT-guidance： phantom and animal experiments. Minimally Invasive Therapy & Allied Technologies, 31, 206-215(2022).

[4] C YANG, S GUO, X BAO et al. A vascular interventional surgical robot based on surgeon's operating skills. Medical & Biological Engineering & Computing, 57, 1999-2010(2019).

[5] B KOU, D C REN, S J GUO. Geometric parameter identification of medical robot based on improved beetle antennae search algorithm. Bioengineering （Basel， Switzerland）, 9, 58(2022).

[6] H LI, Y WANG, Y LI et al. A novel manipulator with needle insertion forces feedback for robot-assisted lumbar puncture. The International Journal of Medical Robotics and Computer Assisted Surgery, 17(2021).

[7] [7] 7张雨晗， 朱鸿成， 杜晓霞， 等. 实现微米级灭菌范围控制的微细等离子体射流装置［J］. 光学 精密工程， 2022， 30（3）： 296-309. doi: 10.37188/OPE.20223003.0296ZHANGY H， ZHUH C， DUX X， et al. Micro plasma jet devices for micron sterilization range control［J］. Opt. Precision Eng.， 2022， 30（3）： 296-309.（in Chinese）. doi: 10.37188/OPE.20223003.0296

[8] R SOMMA, C TROISE, L ZENI et al. Long-term monitoring with fiber optics distributed temperature sensing at Campi flegrei： the Campi flegrei deep drilling project. Sensors （Basel， Switzerland）, 19, 1009(2019).

[9] G YAN, T Q WANG, L Q ZHU et al. A novel strain-decoupled sensitized FBG temperature sensor and its applications to aircraft thermal management. Optics & Laser Technology, 140, 106597(2021).

[10] [10] 10姚斌， 张建勋， 代煜， 等. 用于微创外科手术机器人的多维力传感器解耦方法研究［J］. 仪器仪表学报， 2020， 41（1）： 147-153. doi: 10.19650/j.cnki.cjsi.J1905479YAOB， ZHANGJ X， DAIY， et al. Research on decoupling method of multi-dimensional force sensor used in minimally invasive surgical robot［J］. Chinese Journal of Scientific Instrument， 2020， 41（1）： 147-153.（in Chinese）. doi: 10.19650/j.cnki.cjsi.J1905479

[11] [11] 11吴根柱， 林春婷， 卢俊城， 等. 七芯光子晶体光纤温度传感器［J］. 光学 精密工程， 2021， 29（5）： 951-957. doi: 10.37188/OPE.2020.0662WUG Z， LINC T， LUJ C， et al. Seven-core photonic crystal fiber temperature sensor［J］. Optics and Precision Engineering， 2021， 29（5）： 951-957.（in Chinese）. doi: 10.37188/OPE.2020.0662

[12] X K GAO, T G NING, C B ZHANG et al. A dual-parameter fiber sensor based on few-mode fiber and fiber Bragg grating for strain and temperature sensing. Optics Communications, 454, 124441(2020).

[13] Y G LIU, X LIU, T ZHANG et al. Integrated FPI-FBG composite all-fiber sensor for simultaneous measurement of liquid refractive index and temperature. Optics and Lasers in Engineering, 111, 167-171(2018).

[14] Y LIU, C P LANG, X C WEI et al. Strain force sensor with ultra-high sensitivity based on fiber inline Fabry-Perot micro-cavity plugged by cantilever taper. Optics Express, 25, 7797-7806(2017).

[15] W J LAI, L CAO, Z L XU et al. Distal end force sensing with optical fiber Bragg gratings for tendon-sheath mechanisms in flexible endoscopic robots, 5349-5255(2018).

[16] K SUN, M LI, S X WANG et al. Development of a fiber Bragg grating-enabled clamping force sensor integrated on a grasper for laparoscopic surgery. IEEE Sensors Journal, 21, 16681-16690(2021).

[17] A A G ABUSHAGUR, N ARSAD, A A A BAKAR. Cantilever beam with a single fiber Bragg grating to measure temperature and transversal force simultaneously. Sensors （Basel， Switzerland）, 21, 2002(2021).

[18] [18] 18孙世政， 于竞童， 韩宇， 等. 基于SSA-ELM的双层十字梁结构光纤布拉格光栅传感器三维力解耦［J］. 光学 精密工程， 2022， 30（3）： 274-285. doi: 10.37188/OPE.2021.0549SUNS Z， YUJ T， HANY， et al. FBG sensor of double-layer cross beam structure based on SSA-ELM three-dimensional force decoupling［J］. Opt. Precision Eng.， 2022， 30（3）： 274-285.（in Chinese）. doi: 10.37188/OPE.2021.0549