Journal of the Chinese Ceramic Society, Volume. 52, Issue 11, 3418(2024)
Interfacial Bonding Deterioration Mechanism of Steel Fiber-Ultra High Performance Concrete in Marine Environment
[3] [3] ANGST U, ELSENER B, LARSEN C K, et al. Critical chloride content in reinforced concrete—A review[J]. Cem Concr Res, 2009, 39(12): 1122–1138.
[4] [4] DU J, MENG W N, KHAYAT K H, et al. New development of ultra-high-performance concrete (UHPC)[J]. Compos Part B Eng, 2021, 224: 109220.
[6] [6] BAHMANI H, MOSTOFINEJAD D. Microstructure of ultra-high-performance concrete (UHPC)–A review study[J]. J Build Eng, 2022, 50: 104118.
[7] [7] HASHIMOTO K, TOYODA T, YOKOTA H, et al. Tension-softening behavior and chloride ion diffusivity of cracked ultra high strength fiber reinforced concrete[C]. RILEM-fib-AFGC Int Symposium on Ultra-High Performance Fibre-Reinforced Concrete, 2013, 257–264.
[8] [8] SHIN W, YOO D Y. Influence of steel fibers corroded through multiple microcracks on the tensile behavior of ultra-high-performance concrete[J]. Constr Build Mater, 2020, 259: 120428.
[9] [9] PYO S, TAFESSE M, KIM H, et al. Effect of chloride content on mechanical properties of ultra high performance concrete[J]. Cem Concr Compos, 2017, 84: 175–187.
[10] [10] LV L S, WANG J Y, XIAO R C, et al. Influence of steel fiber corrosion on tensile properties and cracking mechanism of ultra-high performance concrete in an electrochemical corrosion environment[J]. Constr Build Mater, 2021, 278: 122338.
[11] [11] YOO D Y, SHIN W, BANTHIA N. Corrosion of partially and fully debonded steel fibers from ultra-high-performance concrete and its influence on pullout resistance[J]. Cem Concr Compos, 2021, 124: 104269.
[12] [12] MINTY R F, YANG L, THOMASON J L. The influence of hardener-to-epoxy ratio on the interfacial strength in glass fibre reinforced epoxy composites[J]. Compos Part A Appl Sci Manuf, 2018, 112: 64–70.
[13] [13] DEMIR M M, HORZUM N, TADEMIRCI A, et al. Mechanical interlocking between porous electrospun polystyrene fibers and an epoxy matrix[J]. ACS Appl Mater Interfaces, 2014, 6(24): 21901–21905.
[14] [14] KIM J J, YOO D Y. Effects of fiber shape and distance on the pullout behavior of steel fibers embedded in ultra-high-performance concrete[J]. Cem Concr Compos, 2019, 103: 213–223.
[15] [15] SUN H, QUE Z C, WEI H N, et al. Tunning matrix rheology and mechanical performance of ultra-high performance concrete using cellulose nanofibers[J]. Nanotechnol Rev, 2022, 11(1): 1570–1582.
[16] [16] LI G, YIN B B, ZHANG L W, et al. A framework for phase-field modeling of interfacial debonding and frictional slipping in heterogeneous composites[J]. Comput Meth Appl Mech Eng, 2021, 382: 113872.
[17] [17] BU A M, ZHANG Y P, ZHANG Y F, et al. Microstructure, properties and formation mechanism of SiO2/SiC nano-coating onto carbon fiber by non-electrode plasma electrolysis[J]. J Alloys Compd, 2019, 773: 346–351.
[18] [18] PI Z Y, XIAO H G, DU J J, et al. Interfacial microstructure and bond strength of nano-SiO2-coated steel fibers in cement matrix[J]. Cem Concr Compos, 2019, 103: 1–10.
[19] [19] TREJBAL J, KOPECK L, TESREK P, et al. Impact of surface plasma treatment on the performance of PET fiber reinforcement in cementitious composites[J]. Cem Concr Res, 2016, 89: 276–287.
[20] [20] BILBA K, ARSENE M A. Silane treatment of bagasse fiber for reinforcement of cementitious composites[J]. Compos Part A Appl Sci Manuf, 2008, 39(9): 1488–1495.
[21] [21] SOULIOTI D V, BARKOULA N M, KOUTSIANOPOULOS F, et al. The effect of fibre chemical treatment on the steel fibre/cementitious matrix interface[J]. Constr Build Mater, 2013, 40: 77–83.
[22] [22] XIE Y J, HILL C A S, XIAO Z F, et al. Silane coupling agents used for natural fiber/polymer composites: A review[J]. Compos Part A Appl Sci Manuf, 2010, 41(7): 806–819.
[23] [23] GANDHI J S, SINGH S, VAN OOIJ W J, et al. Evidence for formation of metallo-siloxane bonds by comparison of dip-coated and electrodeposited silane films[J]. J Adhes Sci Technol, 2006, 20(15): 1741–1768.
[26] [26] LIU T J, LI K X, ZHOU A, et al. Atomic insight into the functionalization of cellulose nanofiber on durability of epoxy nanocomposites[J]. Nano Res, 2023, 16(2): 3256–3266.
[27] [27] ZHOU A, BYKZTRK O, LAU D. Debonding of concrete-epoxy interface under the coupled effect of moisture and sustained load[J]. Cem Concr Compos, 2017, 80: 287–297.
[28] [28] PELLENQ R J M, KUSHIMA A, SHAHSAVARI R, et al. A realistic molecular model of cement hydrates[J]. Proc Natl Acad Sci USA, 2009, 106(38): 16102–16107.
[29] [29] KUNHI MOHAMED A, PARKER S C, BOWEN P, et al. An atomistic building block description of C-S-H–Towards a realistic C-S-H model[J]. Cem Concr Res, 2018, 107: 221–235.
[30] [30] ZHOU A, KANG J T, QIN R Y, et al. Weaving the next-level structure of calcium silicate hydrate at the submicron scale via a remapping algorithm from coarse-grained to all-atom model[J]. Cem Concr Res, 2024, 180: 107501.
[31] [31] WANG X Q, JIAN W, BUYUKOZTURK O, et al. Degradation of epoxy/glass interface in hygrothermal environment: An atomistic investigation[J]. Compos Part B Eng, 2021, 206: 108534.
[32] [32] JIN Z Q, LI S C, SONG H M, et al. Experimental and simulative study of bonding properties on fiber/epoxy interfaces by digital image correlation (DIC) technique and molecular dynamics[J]. Cem Concr Compos, 2022, 131: 104569.
[33] [33] ZHOU A, YU Z C, WEI H N, et al. Understanding the toughening mechanism of silane coupling agents in the interfacial bonding in steel fiber-reinforced cementitious composites[J]. ACS Appl Mater Interfaces, 2020, 12(39): 44163–44171.
[34] [34] TAM L H, HE L, WU C. Molecular dynamics study on the effect of salt environment on interfacial structure, stress, and adhesion of carbon fiber/epoxy interface[J]. Compos Interfaces, 2019, 26(5): 431–447.
[35] [35] YU Z C, ZHOU A, NING W Y, et al. Molecular insights into the weakening effect of water on cement/epoxy interface[J]. Appl Surf Sci, 2021, 553: 149493.
[36] [36] HEINZ H, LIN T J, MISHRA R K, et al. Thermodynamically consistent force fields for the assembly of inorganic, organic, and biological nanostructures: The interface force field[J]. Langmuir, 2013, 29(6): 1754–1765.
[37] [37] JIAN W, LAU D. Understanding the effect of functionalization in CNT-epoxy nanocomposite from molecular level[J]. Compos Sci Technol, 2020, 191: 108076.
[38] [38] QIN R Y, ZHOU A, YU Z C, et al. Role of carbon nanotube in reinforcing cementitious materials: An experimental and coarse-grained molecular dynamics study[J]. Cem Concr Res, 2021, 147: 106517.
[41] [41] XU D S, TANG J H, HU X, et al. Influence of silica fume and thermal curing on long-term hydration, microstructure and compressive strength of ultra-high performance concrete (UHPC)[J]. Constr Build Mater, 2023, 395: 132370.
[42] [42] PARK S, SCHULTEN K. Calculating potentials of mean force from steered molecular dynamics simulations[J]. J Chem Phys, 2004, 120(13): 5946–5961.
[43] [43] HUANG Y, WANG S-B. Hybrid adaptive neuro fuzzy inference system for optimization mechanical behaviors of nanocomposite reinforced concrete[J]. Adv Nano Res, 2022, 12(5): 515–527.
[44] [44] PANG B, ZHANG Y S, LIU G J, et al. Interface properties of nanosilica-modified waterborne epoxy cement repairing system[J]. ACS Appl Mater Interfaces, 2018, 10(25): 21696–21711.
Get Citation
Copy Citation Text
LI Kexuan, MAO Jinwang, LIU Tiejun, ZHOU Ao. Interfacial Bonding Deterioration Mechanism of Steel Fiber-Ultra High Performance Concrete in Marine Environment[J]. Journal of the Chinese Ceramic Society, 2024, 52(11): 3418
Category:
Received: Mar. 31, 2024
Accepted: Dec. 13, 2024
Published Online: Dec. 13, 2024
The Author Email: Ao ZHOU (zhouao@hit.edu.cn)