[1] Lu Y J, Han M. Fiber-optic temperature sensor using dual Fabry-Perot cavities filled with gas of different pressure[J]. Sensors and Actuators A: Physical, 261, 229-234(2017).

[2] Dong H Y, Liu C N, Sun S M et al. Optical fiber high-temperature and refractive index sensor fabricated by femtosecond laser[J]. Laser & Optoelectronics Progress, 56, 170633(2019).

[3] Zhang G, Wu X Q, Zhang W J et al. High temperature Vernier probe utilizing photonic crystal fiber-based Fabry-Perot interferometers[J]. Optics Express, 27, 37308-37317(2019).

[4] Chen Y F, Wan H D, Chen Q et al. High sensitivity optical fiber temperature sensor based on rare-earth-doped double-fiber peanut[J]. Chinese Journal of Lasers, 47, 0110001(2020).

[5] Zhang W H, Jiang J F, Wang S et al. Fiber-optic Fabry-Perot high-pressure sensor for marine applications[J]. Acta Optica Sinica, 37, 0206001(2017).

[6] Zhang T J, Jiang Y, Ma W Y et al. A high fineness optical fiber F-P pressure sensor based on MEMS[J]. Laser & Optoelectronics Progress, 56, 170625(2019).

[7] Kou W Y, Wang W, Chen H B et al. Non-scanning correlation demodulation for fiber-optic Fabry-Perot microcavity strain sensor[J]. Laser & Optoelectronics Progress, 56, 170630(2019).

[8] Liu S, Wang Y P, Liao C R et al. High-sensitivity strain sensor based on in-fiber improved Fabry-Perot interferometer[J]. Optics Letters, 39, 2121-2124(2014).

[9] Huang B S, Gao S C, Huang X C et al. High-sensitivity fiber Fabry-Pérot interferometer strain sensor[J]. Acta Optica Sinica, 40, 0606002(2020).

[10] Wang T T, Ge Y X, Chang J H et al. Wavelength-interrogation Fabry-Perot refractive index sensor based on a sealed in-fiber cavity[J]. IEEE Photonics Technology Letters, 28, 3-6(2016).

[11] Flores R, Janeiro R, Viegas J et al. Optical fibre Fabry-Pérot interferometer based on inline microcavities for salinity and temperature sensing[J]. Scientific Reports, 9, 9556(2019).

[12] Hou W L, Liu G G, Han M et al. A novel, high-resolution, high-speed fiber-optic temperature sensor for oceanographic applications[C], 1-4(2015).

[13] Ramakrishnan M, Rajan G, Semenova Y et al. Overview of fiber optic sensor technologies for strain/temperature sensing applications in composite materials[J]. Sensors, 16, 99(2016).

[14] Ye X W, Su Y H, Han J P et al. Structural health monitoring of civil infrastructure using optical fiber sensing technology: a comprehensive review[J]. Scientific World Journal, 2014, 652329(2014).

[15] Zhao Y, Li X G, Zhou X et al. Review on the graphene based optical fiber chemical and biological sensors[J]. Sensors and Actuators B: Chemical, 231, 324-340(2016).

[16] Cao K J, Liu Y, Qu S L et al. Compact fiber biocompatible temperature sensor based on a hermetically-sealed liquid-filling structure[J]. Optics Express, 25, 29597-29604(2017).

[17] Sposito A, Pechstedt R D. Optical sensors for aerospace applications: brake temperature sensors and fuel pump pressure sensors for aircraft[C], 97-101(2016).

[18] Wu Y F, Zhang Y D, Wu J et al. Fiber-optic hybrid-structured Fabry-Perot interferometer based on large lateral offset splicing for simultaneous measurement of strain and temperature[J]. Journal of Lightwave Technology, 35, 4311-4315(2017).

[19] Sun B, Wang Y P, Qu J L et al. Simultaneous measurement of pressure and temperature by employing Fabry-Perot interferometer based on pendant polymer droplet[J]. Optics Express, 23, 1906-1911(2015).

[20] Leal-Junior A G, Díaz C R, Marques C et al. Analysis of viscoelastic properties influence on strain and temperature responses of Fabry-Perot cavities based on UV-curable resins[J]. Optics & Laser Technology, 120, 105743(2019).

[21] Liu Y Y, Liu L, Liu X Q et al. Sensitivity improvement of Fabry-Perot sensor based on Vernier effect[J]. Acta Optica Sinica, 39, 0428001(2019).

[22] Claes T, Bogaerts W, Bienstman P et al. Experimental characterization of a silicon photonic biosensor consisting of two cascaded ring resonators based on the Vernier-effect and introduction of a curve fitting method for an improved detection limit[J]. Optics Express, 18, 22747-22761(2010).

[23] Hou L Y, Zhao C L, Xu B et al. Highly sensitive PDMS-filled Fabry-Perot interferometer temperature sensor based on the Vernier effect[J]. Applied Optics, 58, 4858-4865(2019).

[24] Zhao C L, Han F, Li Y N et al. Volatile organic compound sensor based on PDMS coated Fabry-Perot interferometer with Vernier effect[J]. IEEE Sensors Journal, 19, 4443-4450(2019).

[25] Zhang J, Liao H, Lu P et al. Ultrasensitive temperature sensor with cascaded fiber optic Fabry-Perot interferometers based on Vernier effect[J]. IEEE Photonics Journal, 10, 1-11(2018).

[26] Zhang P, Tang M, Gao F et al. Simplified hollow-core fiber-based Fabry-Perot interferometer with modified Vernier effect for highly sensitive high-temperature measurement[J]. IEEE Photonics Journal, 7, 1-10(2015).

[27] Lang C P, Liu Y, Liao Y Y et al. Ultra-sensitive fiber-optic temperature sensor consisting of cascaded liquid-air cavities based on Vernier effect[J]. IEEE Sensors Journal, 20, 5286-5291(2020).

[28] Nan T, Liu B, Wu Y et al. Ultrasensitive strain sensor based on Vernier-effect improved parallel structured fiber-optic Fabry-Perot interferometer[J]. Optics Express, 27, 17239-17250(2019).