[1] [1] Hu Wenchuan, Qiu Zurong, Zhang Guoxiong. Measurement of large-scale spatial angle formed by non-uniplanar lines[J].Opt Precision Eng, 2012, 20(7): 1427-1433. (in Chinese)

[2] [2] Maurizio Galetto, Luca Mastrogiacomo, Domenico Maisano, et al. Cooperative fusion of distributed multi-sensor LVM (Large Volume Metrology) systems[J]. CIRP Annals-Manufacturing Technology, 2015, 64(1): 483-486.

[3] [3] Duanmu Qiong, Yang Xueyou, Zhu Jigui, et al. 3D coordinate measurement system based on optoelectronic scanning[J]. Infrared and Laser Engineering, 2011, 40(10): 2014-2019. (in Chinese)

[4] [4] Liu Ruimin, Guo Xiqing, Yu Jin. A novel instrument for high precision angle measurement of optical axes[J]. Optik,2013, 124(12): 1132-1135.

[5] [5] Zhang G X, Yao J W, Qiu Z R, et al. Large-scale spatial angle measurement[J]. CIRP Annals Manufacturing Technology, 2008, 57(1): 525-528.

[6] [6] Geng Lei, Lao Dabao, Yang Xueyou, et al. Key techniques on rotating laser plane coordinate measuring system[J]. Infrared and Laser Engineering, 2011, 40(11): 2274-2280. (in Chinese)

[7] [7] Li Yan, Fan Dapeng. Development of pointing error and sensitivity analysis of opto-electrical stabilization mechanism[J]. Journal of National University of Defense Technology, 2008, 30(1): 104-109. (in Chinese)

[8] [8] Guo Minghuan, Wang Zhifeng, Zhang Jianhan, et al. Accurate altitude-azimuth tracking angle formulas for a heliostat with mirror-pivot offset and other fixed geometrical errors[J]. Solar Energy, 2011, 85(5): 1091-1100.

[9] [9] Liu Wei, Shi Wenxiao, Cao Jingtai, et al. Bit error rate analysis with real-time pointing errors correction in free space optical communication systems[J]. Optik, 2014, 145(1): 324-328.

[10] [10] Shi Zhaoyao, Zhang Yu, Zhang Bai. Uncertainty evaluation of CMM measurement for gear profile[J]. Opt Precision Eng, 2012, 20(4): 766-771. (in Chinese)

[11] [11] Qing Wang, Nick Zissler, Roger Holden. Evaluate error sources and uncertainty in large scale measurement systems[J]. Robotics and Computer-Integrated Manufacturing, 2013, 29(1): 1-11.