[1] [1] NAKATE U T, YU Y T, PARK, S. Hierarchical CuO nanostructured materials for acetaldehyde sensor application［J］. Micro Electron Eng, 2022, 251: 111662.

[2] [2] PATIL P, NAKATE Y T, AMBARE R C, et al. 2-D NiO nanostructured material for high response acetaldehyde sensing application［J］. Mater Lett, 2021, 293: 129757.

[3] [3] SERINAY N, FELLAH M F. Acetaldehyde adsorption and detection: A density functional theory study on Al-doped graphene［J］. Vacuum 2020, 175: 109279.

[4] [4] XIAO J T, CHE Y H, LV B W, et al. Synthesis of WO3 nanorods and their excellent ethanol gas-sensing performance［J］. Mater Reaserch, 2021, 24(3): e20200434.

[6] [6] NAGUIB M, KURTOGLU M, PRESSER V, et al. Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2［J］. Adv Mater, 2011, 23(37): 4248-4253.

[7] [7] KIM S J, KOH H J, REN C E, et al. Metallic Ti3C2Tx MXene gas sensors with ultrahigh signal-to-noise ratio［J］. ACS Nano, 2018, 12(2): 986-993.

[8] [8] LEE E, VAHIDMOHAMMADI A, PROROK B C, et al. Room temperature gas sensing of two-dimensional titanium carbide (MXene)［J］. ACS Appl Mater Interfaces, 2017, 9(42): 37184-37190.

[9] [9] SUN S, WANG M, CHANG X, JIANG Y, et al. W18O49/Ti3C2Tx Mxene nanocomposites for highly sensitive acetone gas sensor with low detection limit［J］. SENSOR ACTUAT B-CHEM, 2020, 304: 127274.

[10] [10] LIU M, JI J, SONG P, et al. α-Fe2O3 nanocubes/Ti3C2Tx MXene composites for improvement of acetone sensing performance at room temperature［J］. Sens Actuat B-Chem, 2021, 349: 130782.

[11] [11] HE T, LIU W, LV T, et al. MXene/SnO2 heterojunction based chemical gas sensors［J］. Sens Actuat B-Chem, 2021, 329: 129275.

[12] [12] WANG C, LI R, FENG L Y, et al. The SnO2/MXene composite ethanol sensor based on MEMS platform［J］. Chemosensors, 2022, 10, 109-134.

[13] [13] LI R L, FAN Y, MA Z H, et al. Controllable preparation of ultrathin MXene nanosheets and their excellent QCM humidity sensing properties enhanced by fluoride doping［J］. Microchim Acta, 2021, 188: 81-92.

[14] [14] HERMAWAN A, ZHANG B, TAUFIK A, et al. CuO nanoparticles/ Ti3C2Tx MXene hybrid nanocomposites for detection of toluene gas［J］. ACS Appl Nano Mater, 2020, 3(5): 4755-4766.

[17] [17] ZHANG N, LI F, YIN Y, et al. Gas sensor based on TiO2 nanofibers decorated with monodispersed WO3 nanocubes for fast and selective xylene detection［J］. Mater Sci Eng B, 2021, 263: 114901.

[19] [19] ANJU V P, JITHESH P R, NARAYANANKUTTY S K. A novel humidity and ammonia sensor based on nanofibers/polyaniline/ polyvinyl alcohol［J］. Sens Actuat A-Phys, 2019, 285, 35-44.

[20] [20] NAGANABOINA V R, SINGH S G. CdS based chemiresistor with schottky contact: Toxic gases detection with enhanced sensitivity and selectivity at room temperature［J］. Sens ActuaT B-Chem, 2022, 357: 131421.

[21] [21] MA Y T, MA S Y, TANG J, et al. Constructed heterostructured SnS@MoO3 hollow nanotubes and detected sensing properties towards TEA［J］. Vacuum, 2021, 184: 109939.

[22] [22] LI, X, ZHANG, Y, BHATTACHARYA A, et al. The formaldehyde sensing properties of CdGa2O4 prepared by co-precipitation method［J］. Sens Actuat B-Chem, 2021, 343: 129834.