Acta Optica Sinica, Volume. 36, Issue 11, 1114003(2016)
Tribological Performance of Medical CoCrMo Alloy Fabricated by Selective Laser Melting
[1] [1] Yang Yongqiang, Song Changhui, Wang Di. Selective laser melting and its applications on personalized medical parts[J]. Journal of Mechanical Engineering, 2014, 50(21): 140-151.
[2] [2] Wang Anqi, Feng Xiaoming, Yang Zhaopeng, et al. Development and advances of additive manufacturing in medical devices[J]. China Medical Device Information, 2014, 20(8): 1-7, 33.
[4] [4] Tang Huiping, Wang Jian, Lu Shenglu, et al. Research progress in selective electron beam melting[J]. Materials China, 2015, 34(3): 225-235.
[5] [5] Wang Yunda, Yang Yongqiang, Song Changhui, et al. Process optimization and electrochemical behavior of CoCrMo alloy fabricated by selective laser melting based on response surface method[J]. The Chinese Journal of Nonferrous Metals, 2014, 24(10): 2497-2505.
[6] [6] Su X B, Yang Y Q, Yu P, et al. Development of porous medical implant scaffolds via laser additive manufacturing[J]. Transactions of Nonferrous Metals Society of China, 2012, 22: s181-s187.
[7] [7] Zhang Ran, Zhang Ziqun, Song Zhijian. The repair of skull defect applying rapid prototyping based on level set[J]. Chinese Journal of Biomedical Engineering, 2013, 32(3): 373-377.
[8] [8] Song Changhui, Yang Yongqiang, Wang Yunda, et al. Research on process and property of CoCrMo alloy directly manufactured by selective laser melting[J]. Chinese J Lasers, 2014, 41(6): 58-65:
[9] [9] Zhang Guoqing, Yang Yongqiang, Song Changhui, et al. Study on design and properties of porous CoCrMo alloy structure manufactured by selective laser melting[J]. Chinese J Lasers, 2015, 42(11): 1103003.
[10] [10] Zhang Guoqing, Yang Yongqiang, Lin Hui, et al. Study on the tribology performance of CoCrMo alloy parts manufactured by selective laser melting[J]. Chinese J Lasers, 2016, 43(8): 0802013.
[11] [11] Wang Qingliang, Zhang Lei, Dong Jiandong, et al. Investigation on tribological properties of medical grade forged and cast CoCrMo alloys[J]. Journal of Xuzhou Institute of Technology (Natural Sciences Edition), 2010, 25(3): 7-12.
[12] [12] Gong Yuanyuan. Wear resistance of dental cobalt-chromium alloy by heat treatment[D]. Chongqing: Chongqing Medical University, 2008.
[13] [13] Takaichi A, Suyalatu, Nakamoto T, et al. Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2013, 21: 67-76.
[14] [14] Schwindling F S, Seubert M, Rues S, et al. Two-body wear of CoCr fabricated by selective laser melting compared with different dental alloys[J]. Tribology Letters, 2015, 60(2): 1-8.
[15] [15] Chiba A, Kumagai K, Nomura N, et al. Pin-on-disk wear behavior in a like-on-like configuration in a biological environment of high carbon cast and low carbon forged Co-29Cr-6Mo alloys[J]. Acta Materialia, 2007, 55(4): 1309-1318.
[16] [16] Henriques B, Soares D, Silva F S. Microstructure, hardness, corrosion resistance and porcelain shear bond strength comparison between cast and hot pressed CoCrMo alloy for metal-ceramic dental restorations[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2012, 12: 83-92.
[17] [17] Li Feng, Wang Chengtao. Measurement of contact angle of cartilage and artificial joint materials[J]. Lubrication Engineering, 2009, 34(8): 1-5.
[18] [18] Celik A, Bayrak , Alsaran A, et al. Effects of plasma nitriding on mechanical and tribological properties of CoCrMo alloy[J]. Surface and Coatings Technology, 2008, 202(11): 2433-2438.
[19] [19] Lanning B R, Wei R H. High intensity plasma ion nitriding of orthopedic materials: Part II. Microstructural analysis[J]. Surface and Coatings Technology, 2004, 186(1-2): 314-319.
[20] [20] Saldívar-García A J, López H F. Microstructural effects on the wear resistance of wrought and as-cast Co-Cr-Mo-C implant alloys[J]. Journal of Biomedical Materials Research Part A, 2005, 74A(2): 269-274.
[21] [21] Wei R H, Booker T, Rincon C, et al. High-intensity plasma ion nitriding of orthopedic materials: Part I. Tribological study[J]. Surface and Coatings Technology, 2004, 186(1-2): 305-313.
[22] [22] Zhang Shiwen, Lian Yuying. Water reppellence and contact angle measurement[J]. Modern Measurement and Test, 1994(3): 36-41.
[23] [23] Gao Zhan. Study on biotribology characteristics of modified Ti6Al4V alloy/UHMWPE[D]. Nanjing: Nanjing University of Science and Technology, 2006.
Get Citation
Copy Citation Text
Lin Hui, Yang Yongqiang, Zhang Guoqing, Song Changhui. Tribological Performance of Medical CoCrMo Alloy Fabricated by Selective Laser Melting[J]. Acta Optica Sinica, 2016, 36(11): 1114003
Category:
Received: Apr. 28, 2016
Accepted: --
Published Online: Nov. 8, 2016
The Author Email: Hui Lin (linhui_zj@163.com)