[1] R HE, N ZHOU, K ZHANG et al. Progress and challenges towards additive manufacturing of SiC ceramic. Journal of Advanced Ceramics, 637(2021).

[2] P KUMAR, V K SRIVASTAVA. Tribological behaviour of C/C-SiC composites—a review. Journal of Advanced Ceramics(2016).

[3] X CHEN, J YIN, X LIU et al. Effect of laser power on mechanical properties of SiC composites rapidly fabricated by selective laser sintering and direct liquid silicon infiltration. Ceramics International, 19123(2022).

[4] L Z HUANG, J YIN, X CHEN et al. Selective laser sintering of SiC green body with low binder content. Journal of Inorganic Materials, 347(2022).

[5] Z W CHEN, Z Y LI, J J LI et al. 3D printing of ceramics: a review. Journal of the European Ceramic Society, 661(2019).

[6] A BELOSLUDTSEV, D BUINOVSKIS. Significant increase of UV reflectivity of SiC galvanometer mirror scanners for the high-power laser applications. Optics & Laser Technology(2021).

[7] G LIU, X ZHANG, J YANG et al. Recent advances in joining of SiC-based materials (monolithic SiC and SiC_f/SiC composites): joining processes, joint strength, and interfacial behavior. Journal of Advanced Ceramics(2019).

[8] M SONG, Y HE. Effects of die-pressing pressure and extrusion on the microstructures and mechanical properties of SiC reinforced pure aluminum composites. Materials & Design, 985(2010).

[9] T S SUZUKI, T UCHIKOSHI, Y SAKKA. Effect of sintering conditions on microstructure orientation in α-SiC prepared by slip casting in a strong magnetic field. Journal of the European Ceramic Society, 2813(2010).

[10] Y LIU, C HU, W FENG et al. Microstructure and properties of diamond/SiC composites prepared by tape-casting and chemical vapor infiltration process. Journal of the European Ceramic Society, 3489(2014).

[11] X CHEN, J YIN, L HUANG et al. Microstructural tailoring, mechanical and thermal properties of SiC composites fabricated by selective laser sintering and reactive melt infiltration. Journal of Advanced Ceramics, 830(2023).

[14] G LIU, X F ZHANG, X L CHEN et al. Additive manufacturing of structural materials. Materials Science and Engineering: R: Reports(2021).

[15] W DU, M SINGH, D SINGH. Binder jetting additive manufacturing of silicon carbide ceramics: development of bimodal powder feedstocks by modeling and experimental methods. Ceramics International, 19701(2020).

[16] C L CRAMER, A M ELLIOTT, E LARA-CURZIO et al. Properties of SiC-Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration. Journal of the American Ceramic Society, 5467(2021).

[17] C L CRAMER, H ARMSTRONG, A FLORES-BETANCOURT et al. Processing and properties of SiC composites made via binder jet 3D printing and infiltration and pyrolysis of preceramic polymer. International Journal of Ceramic Engineering & Science, 320(2020).

[18] K TERRANI, B JOLLY, M TRAMMELL. 3D printing of high- purity silicon carbide. Journal of the American Ceramic Society, 1575(2020).

[19] Y Y XING, H B WU, X J LIU et al. Grain composition on solid-state-sintered SiC ceramics. Journal of Inorganic Materials, 1167(2018).

[20] S LIU, Z HA. Prediction of random packing limit for multimodal particle mixtures. Powder Technology, 283(2002).