Laser & Optoelectronics Progress, Volume. 60, Issue 1, 0114012(2023)
Microstructures and Property of Aluminum Alloy Doped with Copper Powder Fabricated by Selective Laser Melting
[1] Lü X R, Liu T T, Liao W H et al. Solidification crack elimination and quality control of high-strength aluminum alloy 7075 fabricated using laser powder bed fusion[J]. Chinese Journal of Lasers, 49, 1402209(2022).
[2] Qi S W, Rong P, Huang D et al. Room- and high-temperature mechanical properties of aluminum alloys fabricated using laser powder bed fusion additive manufacturing[J]. Chinese Journal of Lasers, 49, 0802001(2022).
[3] Yang T, Liu T, Liao W et al. The influence of process parameters on vertical surface roughness of the AlSi10Mg parts fabricated by selective laser melting[J]. Journal of Materials Processing Technology, 266, 26-36(2019).
[4] Vafadar A, Guzzomi F, Rassau A et al. Advances in metal additive manufacturing: a review of common processes, industrial applications, and current challenges[J]. Applied Sciences, 11, 1213(2021).
[5] Lü F, Tian Z J, Liang H X et al. Microstructures and mechanical properties of AlSi10Mg aluminum alloy fabricated by laser melting deposition[J]. Journal of South China University of Technology (Natural Science Edition), 46, 117-125(2018).
[6] Lu B H. Additive manufacturing: current situation and future[J]. China Mechanical Engineering, 31, 19-23(2020).
[7] Aboulkhair N T, Simonelli M, Parry L et al. 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting[J]. Progress in Materials Science, 106, 100578(2019).
[8] Olakanmi E O, Cochrane R F, Dalgarno K W. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties[J]. Progress in Materials Science, 74, 401-477(2015).
[9] Louvis E, Fox P, Sutcliffe C J. Selective laser melting of aluminium components[J]. Journal of Materials Processing Technology, 211, 275-284(2011).
[10] Gu D D, Meiners W, Wissenbach K et al. Laser additive manufacturing of metallic components: materials, processes and mechanisms[J]. International Materials Reviews, 57, 133-164(2012).
[11] Gu D D, Shen Y F. Research status and technical prospect of rapid manufacturing of metallic part by selective laser melting[J]. Aeronautical Manufacturing Technology, 55, 32-37(2012).
[12] Read N, Wang W, Essa K et al. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development[J]. Materials & Design (1980-2015), 65, 417-424(2015).
[13] Wei P, Wei Z, Chen Z et al. The AlSi10Mg samples produced by selective laser melting: single track, densification, microstructure and mechanical behavior[J]. Applied Surface Science, 408, 38-50(2017).
[14] Chen Z, Wei Z Y, Wei P et al. Experimental research on selective laser melting AlSi10Mg alloys: process, densification and performance[J]. Journal of Materials Engineering and Performance, 26, 5897-5905(2017).
[15] Aboulkhair N T, Maskery I, Tuck C et al. On the formation of AlSi10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties[J]. Journal of Materials Processing Technology, 230, 88-98(2016).
[16] Aboulkhair N T, Everitt N M, Ashcroft I et al. Reducing porosity in AlSi10Mg parts processed by selective laser melting[J]. Additive Manufacturing, 1/2/3/4, 77-86(2014).
[17] Anwar A B, Pham Q C. Selective laser melting of AlSi10Mg: effects of scan direction, part placement and inert gas flow velocity on tensile strength[J]. Journal of Materials Processing Technology, 240, 388-396(2017).
[18] Yang T, Liu T, Liao W et al. Laser powder bed fusion of AlSi10Mg: influence of energy intensities on spatter and porosity evolution, microstructure and mechanical properties[J]. Journal of Alloys and Compounds, 849, 156300(2020).
[19] Thijs L, Kempen K, Kruth J P et al. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder[J]. Acta Materialia, 61, 1809-1819(2013).
[20] Spierings A B, Schneider M, Eggenberger R. Comparison of density measurement techniques for additive manufactured metallic parts[J]. Rapid Prototyping Journal, 17, 380-386(2011).
[21] Yu K B. Study on microstructures and mechanical properties of AlSi10Mg alloy produced by selective laser melting[D](2018).
[22] Hoyt A, Li S X, Dai X Y et al. Synergistic effect of pH and oxalate concentration on corrosion of aluminium alloy 2024-T3[J]. Corrosion Engineering, 53, 413-421(2018).
[23] Shi C X, Zhong Q P, Li C G[M]. China materials engineering canon(2006).
Get Citation
Copy Citation Text
Yanyan Liu, Lü Fei, Meng Xiao, Xuesong Gao, Jun Zhou, Changxing Du. Microstructures and Property of Aluminum Alloy Doped with Copper Powder Fabricated by Selective Laser Melting[J]. Laser & Optoelectronics Progress, 2023, 60(1): 0114012
Category: Lasers and Laser Optics
Received: Nov. 14, 2022
Accepted: Dec. 9, 2022
Published Online: Jan. 5, 2023
The Author Email: Liu Yanyan (253840413@qq.com)