[1] [1] LIU ZH, LI CH B, XUE CH L, et al.. Progress in Ge/Si heterostructures for ligh emitters ［J］. Chinese Optics, 2013, 6(4):449- 456. ( in Chinese)

[2] [2] WAGNER H D. Nanocomposites: paving the way to stronger materials ［J］. Nat. Nanotech., 2007, 2:742-744.

[3] [3] AVOURIS P, CHEN Z, PEREBEINOS V. Carbon-based electronics ［J］. Nat. Nanotech., 2007,2:605-615.

[4] [4] BAUGHMAN R H,ZAKHIDOV A A,HEER W A. Carbon nanotubes-the route toward applications ［J］. Science, 2002, 279: 787-792.

[5] [5] JENSEN K, KIM K, ZETTL A. An atomic-resolution nanomechanical mass sensor ［J］. Nat. Nanotech., 2008, 3(9): 533-537.

[6] [6] GAO P Q, ZOU J P, LI H, et al.. Complementary logic gate arrays based on carbon nanotube network transistors ［J］. Small, 2013, 9(6):813-819.

[7] [7] LU M, LU X K, JANG M W, et al.. Characterization of carbon nanotube nanoswitches with gigahertz resonance frequency and low pull-in voltages using electrostatic force microscopy ［J］. J. Micromech. Microeng., 2010, 20(10):105016.

[8] [8] LASSAGNE B, GARCIA-SANCHEZ D, AGUASCA A, et al.. Ultrasensitive mass sensing with a nanotube electromechanical resonator［J］. Nano Lett., 2008, 8(11):3735-3738.

[9] [9] ZHAO ZH G, LIU X W, WANG X, et al.. Carbon nanotube sensors based on 555 multivibrators［J］. Opt. Precision Eng., 2011, 19(1):118-123. ( in Chinese)

[10] [10] STAMPFER C, HELBLING T, OBERGFELL D, et al.. Fabrication of single-walled carbon nanotube-based pressure sensors ［J］. Nano Lett., 2006, 6(2):233-237.

[11] [11] LIANG J T, LIU SH B, LIU J H , et al.. Microcantilever thermal infrared detector with carbon nanotubes ［J］. Opt. Precision Eng., 2008, 16(4):682-688. ( in Chinese)

[12] [12] ZHANG J L, WANG C, ZHOU C W. Rigid/flexible transparent electronics based on separated carbon nanotube thin-film transistors and their application in display electronics ［J］. ACS Nano, 2012, 6(8):7412-7419.

[13] [13] LOH K J, HOU T C,LYNCH J P, et al.. Carbon nanotube sensing skins for spatial strain and impact damage identification［J］. J. Nondestr. Eval., 2009, 28(1): 9-25.

[14] [14] JAFRI R I, RAMAPRABHU S. Multi walled carbon nanotubes based micro direct ethanol fuel cell using printed circuit board technology ［J］. Int. J. Hydrogen Energy, 2010, 35(3):1339-1346.

[15] [15] LIN C T, LEE C Y, CHIN T S. Anisotropic electrical conduction of vertically-aligned single-walled carbon nanotube films ［J］. Carbon, 2011, 49(4):1446-1452.

[16] [16] SOMANI P R, SOMANI S P, LAU S P, et al.. Field electron emission of double walled carbon nanotube film prepared by drop casting method［J］. Solid-State Electron., 2007, 51(5):788-792.

[17] [17] TAKAGI Y, NOBUSA Y, GOCHO S, et al.. Inkjet printing of aligned single-walled carbon-nanotube thin films［J］. Appl. Phys. Lett., 2013, 102(14):143107.

[18] [18] KWON O S, KIM H, KO H, et al.. Fabrication and characterization of inkjet-printed carbon nanotube electrode patterns on paper［J］. Carbon, 2013, 58:116-127.

[19] [19] GRAUPNER R. Raman spectroscopy of covalently functionalized single-wall carbon nanotubes ［J］. J. Raman Spectrosc., 2007, 38(6): 673-683.

[20] [20] LEBEL L L, ISSA B A, PAEZ O A, et al.. Three-dimensional micro structured nanocomposite beams by microfluidic infiltration［J］. J. Micromech. Microeng., 2009, 19(12):125009-7.

[21] [21] SAUERBREY G. Use of crystal oscillators for weighing thin films and for microweighing ［J］. Z. Phys., 1959, 155(2): 206-222.

[22] [22] XUE W, CUI T. Characterization of layer-by-layer self-assembled carbon nanotube multilayer thin films ［J］. Nanotech., 2007, 18(14):145709.

[23] [23] BUNDE A., DIETERICH W. Percolation in composites［J］. J. Electroceram., 2000, 5(2): 81-92.

[24] [24] WANG P, JIANG B, YE X Y, et al.. Fabrication of multi-walled carbon nanotubes/SBS composite and its electrical percolation ［J］. J. Funct. Mater. Devices, 2008, 14(1):231-235. ( in Chinese)