[1] [1] YAO Y F, LU SH ZH, LIU Y X, et al.. Research on automated micro-liquid dispensing technology［J］. Journal of Mechanical Engineering, 2013, 49(14): 140-153.(in Chinese)

[2] [2] ZHANG Q, XU C, XU CH Y, et al.. Approach and experiment of ultra-micro dispensing［J］. Opt. Precision Eng., 2013, 21(8): 2071-2078.(in Chinese)

[3] [3] KUNCHALA P, KAPPAGANTULA K. 3D printing high density ceramics using binder jetting with nanoparticle densifiers［J］. Materials & Design, 2018, 155: 443-450.

[4] [4] SUN D H, GAO J CH, DU J, et al.. Advances in fluid dispensing technology for micro-electronics packaging［J］. China Mechanical Engineering, 2011, 22(20): 2513-2519.(in Chinese)

[5] [5] YAO Y F, LU SH ZH, LIU Y X, et al.. Research on automated micro-liquid dispensing technology［J］. Journal of Mechanical Engineering, 2013, 49(14): 140-153.(in Chinese)

[6] [6] SHI Y L, LI F D, YANG X, et al.. PL class adhesive dispensing approach for micro bonding［J］. Opt. Precision Eng., 2012, 20(12): 2744-2750.(in Chinese)

[7] [7] KHAN S, NGUYEN T P, LUBEJ M, et al.. Low-power printed micro-hotplates through aerosol jetting of gold on thin polyimide membranes［J］. Microelectronic Engineering, 2018, 194: 71-78.

[8] [8] NGUYEN Q H, HAN Y M, CHOI S B, et al.. Dynamic characteristics of a new jetting dispenser driven by piezostack actuator［J］. IEEE Transactions on Electronics Packaging Manufacturing, 2008, 31(3): 248-259.

[9] [9] LU S, JIANG H, GU SH D, et al.. Experiment and design for the hydraumatic and piezoelectric driven jet dispensing value［J］. Journal of Sichuan University(Engineering Science Edition), 2015, 47(3): 167-173.(in Chinese)

[10] [10] GU SH D, YANG ZH G, JIANG H, et al.. Piezoelectric driven hydraulic amplification jetting system［J］. Opt. Precision Eng., 2015, 23(6): 1627-1634.(in Chinese)

[11] [11] DENG G L, CUI W J, ZHOU C, et al.. A piezoelectric jetting dispenser with a pin joint［J］. Optik, 2018, 175: 163-171.

[12] [12] MITCHELL-SMITH J, SPEIDEL A, BISTEROV I, et al.. Electrolyte multiplexing in electrochemical jet processing［J］. Procedia CIRP, 2018, 68: 483-487.

[13] [13] YU Y Q, LI Q Q. On the design, manufacturing and experiment of a new type flexural joint［J］. Journal of Mechanical Engineering, 2018, 54(13): 79-85.(in Chinese)

[14] [14] LI Y, WU H T, YANG X L, et al.. Optimization design of circular flexure hinges［J］. Opt. Precision Eng., 2018, 26(6): 1370-1379.(in Chinese)

[15] [15] HU J F, YANG ZH H. A novel inchworm linear micro actuator［J］. Opt. Precision Eng., 2018, 26(1): 122-131.(in Chinese)

[16] [16] HU J F, XU G Y, HAO Y ZH. Multi-objective optimization of micro-manipulation stage based on response surface method［J］. Opt. Precision Eng., 2015, 23(4): 1096-1104. (in Chinese)