Laser & Optoelectronics Progress, Volume. 60, Issue 5, 0523004(2023)
Cementation Heat Stress Analysis of Phase Corrector
[1] Roddier F, Thompson L. Adaptive optics in astronomy[J]. Physics Today, 53, 69(2000).
[2] Vorontsov M A, Carhart G W, Cohen M et al. Adaptive optics based on analog parallel stochastic optimization: analysis and experimental demonstration[J]. Journal of the Optical Society of America A, 17, 1440-1453(2000).
[3] Fugate R Q, Fried D L, Ameer G A et al. Measurement of atmospheric wavefront distortion using scattered light from a laser Guide-star[J]. Nature, 353, 144-146(1991).
[4] Xu L, Wu Y C, Du Y L et al. High brightness laser based on Yb∶YAG MOPA chain and adaptive optics system at room temperature[J]. Optics Express, 26, 14592-14600(2018).
[5] Wang K, Tu B, Jia C Y et al. 7 kW direct-liquid-cooled side-pumped Nd∶YAG multi-disk laser resonator[J]. Optics Express, 24, 15012-15020(2016).
[6] Kanno I, Kunisawa T, Suzuki T et al. Development of deformable mirror composed of piezoelectric thin films for adaptive optics[J]. IEEE Journal of Selected Topics in Quantum Electronics, 13, 155-161(2007).
[7] Lin X D, Liu X Y, Wang J L et al. Progress of the continuous surface deformable mirror based on piezo-ceramic actuator[J]. Laser & Optoelectronics Progress, 51, 090003(2014).
[8] Li G H, Lu F, Xu H L et al. Research on the one-dimension deformable mirror with active cooling system[J]. Chinese Journal of Lasers, 42, 0602007(2015).
[9] Chen Q H, Xu S Z, Huang J et al. Effect of pre-stress on damage of fused silica[J]. High Power Laser and Particle Beams, 25, 2531-2535(2013).
[10] Liu H J, Huang J, Wang F R et al. Effect of thermal stresses on fused silica surface on the laser induced damage[J]. Acta Physica Sinica, 59, 1308-1313(2010).
[11] Hu X C, Peng J Q, Zhang B. Thermal distortion of deformable mirror and its influence on beam quality[J]. Chinese Journal of Lasers, 42, 0102003(2015).
[12] Hu X C, Wang D, Chen L X et al. Effect analysis of self-correction method based on the prediction model of deformable mirror with thermal deformation[J]. Chinese Journal of Lasers, 42, 1202001(2015).
[13] Feng F, Wei B B, Liu W G et al. Experimental study of impact of high power laser irradiation on compensation ability of deformable mirrors[J]. Laser & Optoelectronics Progress, 53, 120101(2016).
[14] Li J F, Yang F, Ming M et al. Research on the thermal stress of bond connection used in telescope primary mirror support system[J]. Journal of Changchun University of Science and Technology (Natural Science Edition), 35, 13-17(2012).
[15] Xu H L, Xiang R J, Lu F et al. Control method of local cementation stress in phase-corrector[J]. High Power Laser and Particle Beams, 27, 071002(2015).
Get Citation
Copy Citation Text
Fei Lu, Rujian Xiang, Honglai Xu, Wei Zhang. Cementation Heat Stress Analysis of Phase Corrector[J]. Laser & Optoelectronics Progress, 2023, 60(5): 0523004
Category: Optical Devices
Received: Jan. 27, 2022
Accepted: Mar. 17, 2022
Published Online: Mar. 6, 2023
The Author Email: Lu Fei (lufei04008@163.com)