Infrared and Laser Engineering, Volume. 44, Issue 12, 3701(2015)

Thermal cycle characteristic of InSb focal plane array detector

Wang Yang1、*, Lu Xing2, Meng Chao1,3, Liu Junming1,3, Kuang Yongbian1,3, Meng Qingduan4, Zhu Xubo1,3, and Si Junjie1,3
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • 4[in Chinese]
  • show less

    The cooled InSb infrared focal plane array(IRFPA) detectors should work in the temperature as low as 80 K. As a result, detectors are commonly subjected to thousands of thermal cycle from 80 K to room temperature(300 K) in the entire life cycle. Thermal cycle characteristic of the InSb IRFPA detector was studied. The FPA photoelectric parameter, Dewar heat load and J-T cooling characteristics were analyzed. The results indicated that the maximal fluctuation of the detectivity was 5.5%, the maximal fluctuation of the responsivity was 4.8%, and the number of dead pixels did not increase. The experimental results exhibited that the detectors could undergo at least 2 000 thermal cycles, which provides reference for the research and improvement of detector fabrication.

    Tools

    Get Citation

    Copy Citation Text

    Wang Yang, Lu Xing, Meng Chao, Liu Junming, Kuang Yongbian, Meng Qingduan, Zhu Xubo, Si Junjie. Thermal cycle characteristic of InSb focal plane array detector[J]. Infrared and Laser Engineering, 2015, 44(12): 3701

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: 光电器件与材料

    Received: Apr. 17, 2015

    Accepted: May. 18, 2015

    Published Online: Jan. 26, 2016

    The Author Email: Yang Wang (446364485@qq.com)

    DOI:

    Topics