[1] Navarro M, Michiardi A, Castaño O et al. Biomaterials in orthopaedics[J]. Journal of the Royal Society Interface, 5, 1137-1158(2008).

[2] Thieme M, Wieters K P, Bergner F et al. Titanium powder sintering for preparation of a porous functionally graded material destined for orthopaedic implants[J]. Journal of Materials Science: Materials in Medicine, 12, 225-231(2001).

[3] Li Y, Guo Z M, Hao J J et al. Porosity and mechanical properties of porous titanium fabricated by gelcasting[J]. Rare Metals, 27, 282-286(2008).

[4] Erk K A, Dunand D C, Shull K R. Titanium with controllable pore fractions by thermoreversible gelcasting of TiH2[J]. Acta Materialia, 56, 5147-5157(2008).

[5] Yook S W, Yoon B H, Kim H E et al. Porous titanium (Ti) scaffolds by freezing TiH2/camphene slurries[J]. Materials Letters, 62, 4506-4508(2008).

[6] Zou C M, Zhang E L, Li M W et al. Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres[J]. Journal of Materials Science: Materials in Medicine, 19, 401-405(2008).

[7] Peng D Q, Tang N X. A preliminary study on porous titanium as a new biomaterial[J]. Medical Journal of Chinese People’s Liberation Army, 9, 34-36(1984).

[8] Zhang E L, Zou Z E, Zeng S Y. Imbedded body in porous titanium of biologic medical use, and preparation method[P].

[9] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[10] Zhang G H, Guo S Q, Huang S et al. Relative density of GH4169 superalloy prepared by selective laser melting[J]. Laser & Optoelectronics Progress, 57, 031404(2020).

[11] Lin H, Yang Y Q, Zhang G Q et al. Tribological performance of medical CoCrMo alloy fabricated by selective laser melting[J]. Acta Optica Sinica, 36, 1114003(2016).

[12] Yin B Z, Qin Y, Wen P et al. Laser powder bed fusion for fabrication of metal orthopedic implants[J]. Chinese Journal of Lasers, 47, 1100001(2020).

[13] Wu X Z, Liu H Q, Wang F Y et al. The study on mechanical properties of porous tantalum components formed by laser selective melting[J]. Laser Journal, 40, 154-160(2019).

[14] Heinl P, Müller L, Körner C et al. Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting[J]. Acta Biomaterialia, 4, 1536-1544(2008).

[15] Chen J K, Wu M W, Cheng T L et al. Continuous compression behaviors of selective laser melting Ti-6Al-4V alloy with cuboctahedron cellular structures[J]. Materials Science and Engineering: C, 100, 781-788(2019).

[16] Ataee A, Li Y C, Fraser D et al. Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications[J]. Materials & Design, 137, 345-354(2018).

[17] Parthasarathy J, Starly B, Raman S et al. Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)[J]. Journal of the Mechanical Behavior of Biomedical Materials, 3, 249-259(2010).

[18] Xiao Z F, Yang Y Q, Xiao R et al. Evaluation of topology-optimized lattice structures manufactured via selective laser melting[J]. Materials & Design, 143, 27-37(2018).

[19] Spears T G, Gold S A. In-process sensing in selective laser melting (SLM) additive manufacturing[J]. Integrating Materials and Manufacturing Innovation, 5, 16-40(2016).

[20] Cao X Y. Topology optimization design for porous lattice structure and manufactured by selective laser melting[D](2016).

[21] Xu Y L. Mechanical properties tailoring of porous structure using topology optimization and selective laser melting[D](2019).

[22] Gibson L J, Ashby M F. Cellular solids: structure and properties. Liu P S, Transl, 87-89(2003).

[23] Gorny B, Niendorf T, Lackmann J et al. In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting[J]. Materials Science and Engineering: A, 528, 7962-7967(2011).

[24] Stamboulis A G, Boccaccini A R, Hench L L. Novel biodegradable polymer/bioactive glass composites for tissue engineering applications[J]. Advanced Engineering Materials, 4, 105-109(2002).

[25] Bonfield W, Wang M, Tanner K E. Interfaces in analogue biomaterials[J]. Acta Materialia, 46, 2509-2518(1998).