[1] W KRENKEL. Ceramic Matrix Composites: Fiber Reinforced Ceramics and their Applications. Weinheim: John Wiley & Sons(2008).

[2] H PI, F SONG, H WANG et al. Influence of copper contamination on ablation damage of C/SiC composites under simulated thermal environment of arc heater. Ceramics International, 47, 22016-22024(2021).

[3] K N LEE, R A MILLER. Oxidation behavior of muilite-coated SiC and SiC/SiC composites under thermal cycling between room temperature and 1200 ℃-1400 ℃. Journal of the American Ceramic Society, 79, 620-626(1996).

[4] M GOMINA, P FOURVEL, M H ROUILLON. High temperature mechanical behaviour of an uncoated SiC-SiC composite material. Journal of Materials Science, 26, 1891-1898(1991).

[5] T K JACOBSEN, P BR NDSTED. Mechanical properties of two plain-woven chemical vapor infiltrated silicon carbide-matrix composites. Journal of the American Ceramic Society, 84, 1043-1051(2001).

[6] Y KATOH, K OZAWA, T HINOKI et al. Mechanical properties of advanced SiC fiber composites irradiated at very high temperatures. Journal of Nuclear Materials, 417, 416-420(2011).

[7] R H JONES, C H HENAGER. Fusion reactor application issues for low activation SiC/SiC composites. Journal of Nuclear Materials, 219, 55-62(1995).

[8] X HE, J SONG, J TAN et al. SiC coating: an alternative for the protection of nuclear graphite from liquid fluoride salt. Journal of Nuclear Materials, 448, 1-3(2014).

[9] H NISHIMURA, T TERAI, T YONEOKA et al. Compatibility of structural candidate materials with LiF-BeF₂ molten salt mixture. Journal of Nuclear Materials, 283-287, 1326-1331(2000).

[10] X YANG, M LIU, Y GAO et al. Effect of oxygen on the corrosion of SiC in LiF-NaF-KF molten salt. Corrosion Science, 103, 165-172(2016).

[11] H WANG, H ZHOU, S DONG et al. Corrosion behavior of SiC_f/SiC composites in high temperature fluoride salt environment. Journal of Inorganic Materials, 32, 1133-1140(2017).

[12] B RICCARDI, L GIANCARLI, A HASEGAWA et al. Issues and advances in SiC_f/SiC composites development for fusion reactors. Journal of Nuclear Materials, 329-333, 56-65(2004).

[13] D F WILLIAMS, L M TOTH, K T CLARNO. ORNL/TM-2006/12. Oak Ridge: Oak Ridge National Lab.(2006).

[14] C H HENAGER, Y SHIN, Y BLUM et al. Coatings and joining for SiC and SiC-composites for nuclear energy systems. Journal of Nuclear Materials, 367-370, 1139-1143(2007).

[15] Y ZHANG, D FENG, Z Y HE et al. Progress in joining ceramics to metals. Journal of Iron and Steel Research, 13, 1-5(2006).

[16] M SINGH, R ASTHANA, T P SHPARGEL. Brazing of ceramic- matrix composites to Ti and Hastealloy using Ni-base metallic glass interlayers. Materials Science and Engineering: A, 498, 19-30(2008).

[17] M L HATTALI, S VALETTE, F ROPITAL et al. Study of SiC- nickel alloy bonding for high temperature applications. Journal of the European Ceramic Society, 29, 813-819(2009).

[18] G LIN, J HUANG, H ZHANG. Joints of carbon fiber-reinforced SiC composites to Ti-alloy brazed by Ag-Cu-Ti short carbon fibers. Journal of Materials Processing Technology, 189, 256-261(2007).

[19] H XIONG, X LI, W MAO et al. Wetting behavior of Co based active brazing alloys on SiC and the interfacial reactions. Materials Letters, 57, 3417-3421(2003).

[20] J LU, Z XIA. The corrosion performance of a binary Cu-Ni Alloy used as an anode for aluminum electrolysis. Applied Mechanics & Materials, 55, 7-10(2011).

[21] J S PARK, K LANDRY, J H PEREPEZKO. Kinetic control of silicon carbide/metal reactions. Materials Science and Engineering: A, 259, 279-286(1999).

[22] P FRANKE, TZ D NEUSCH, Nickel//FRANKE P Cu-NiCopper-, TZ D NEUSCH. Cu-Ni(Copper- Nickel)//FRANKE P, NEUSCH TZ D. Binary systems Part 3: Binary Systems from Cs- K to Mg-Zr Heidelberg(2005).

[23] H ARAKI, H SUZUKI, W YANG et al. Effect of high temperature heat treatment in vacuum on microstructure and bending properties of SiC_f/SiC composites prepared by CVI.. Journal of Nuclear Materials, 258-263, 1540-1545(1998).

[24] L C OLSON, J W AMBROSEK, K SRIDHARAN et al. Evaluation of Material Corrosion in Molten Fluoride Salt. Proceedings of the Presentation on AIChE Conference, San-Francisco, F(2006).

[25] H P XIONG, B CHEN, YS KANG et al. Wettability of Co-V, and PdNi-Cr-V system alloys on SiC ceramic and interfacial reactions. Scripta Materialia, 56, 173-176(2007).

[26] L C OLSON, J W AMBROSEK, K SRIDHARAN et al. Materials corrosion in molten LiF-NaF-KF salt. Journal of Fluorine Chemistry, 130, 67-73(2009).

[27] J SCHMIDT, M SCHEIFFELE, M CRIPPA et al. Design, fabrication, and testing of ceramic plat-type heat exchangers with integrated flow channel design. International Journal of Applied Ceramic Technology, 8, 1073-1086(2011).

[28] R S SELLERS, W J CHENG, M H ANDERSON et al. Materials Corrosion in Molten LiF-NaF-KF Eutectic Salt under Different Reduction-oxidation Conditions. Proceedings of the International Conference Advances in Nuclear Power Plants (ICAPP’12), F(2012).

[29] I N OZERYANAYA. Corrosion of metals by molten salts in heat- treatment processes. Metal Science and Heat Treatment, 27, 184-188(1985).