Bulletin of the Chinese Ceramic Society, Volume. 43, Issue 5, 1633(2024)
Bond Performance Between Embedded Rebar and 3D Printed Mortar
[1] [1] AGUSTf-JUAN I,MULLER F,HACK N,et al. Potential benefits of digital fabrication for complex structures: environmental assessment of a robotically fabricated concrete wall[J]. Journal of Cleaner Production,2017,154: 330-340.
[2] [2] WENG Y W,LI M Y,RUAN S Q,et al. Comparative economic,environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach[J]. Journal of Cleaner Production,2020,261: 121245.
[3] [3] BHUSHAN J B,JANGRA P. 3D printed concrete: a comprehensive review of raw material’s properties,synthesis,performance,and potential field applications[J]. Construction and Building Materials,2023,387: 131614.
[4] [4] ASPRONE D,MENNA C,BOS F P,et al. Rethinking reinforcement for digital fabrication with concrete[J]. Cement and Concrete Research,2018,112: 111-121.
[5] [5] KLOFT H,EMPELMANN M,HACK N,et al. Reinforcement strategies for 3D-concrete-printing[J]. Civil Engineering Design,2020,2(4): 131-139.
[6] [6] MECHTCHERINE V,BUSWELL R,KLOFT H,et al. Integrating reinforcement in digital fabrication with concrete: a review and classification framework[J]. Cement and Concrete Composites,2021,119: 103964.
[7] [7] GAO C. Research on mechanical properties of 3D printed concrete beam members strengthened by BFRP bars[D].Hangzhou: Zhejiang University,2020 (in Chinese).
[8] [8] LUKAS G,LAURA E,COSTANTINO M,et al. Inter-laboratory study on the influence of 3D concrete printing set-ups on the bond behaviour of various reinforcements[J]. Cement and Concrete Composites,2022,133: 104660.
[9] [9] LE T T,AUSTIN S A,LIM S,et al. Hardened properties of high-performance printing concrete[J]. Cement and Concrete Research,2012,42(3): 558-566.
[10] [10] DING T,QIN F,XIAO J Z,et al. Experimental study on the bond behaviour between steel bars and 3D printed concrete[J]. Journal of Building Engineering,2022,49: 104105.
[11] [11] INGAGLIO J,FOX J,NAITO C J,et al. Material characteristics of binder jet 3D printed hydrated CSA cement with the addition of fine aggregates[J]. Construction and Building Materials,2019,206: 494-503.
[12] [12] LIU H X,LIU G J,BAI Y P,et al. Experimental study on shearing capacity of reinforced concrete short beams by embedded through-section (ETS) method[J]. China Concrete and Cement Products,2014(11): 64-67 (in Chinese).
[13] [13] LIU H X,LIU G J,KONG X Q,et al. Review of experimental researches on concrete beams shear-strengthened with fiber reinforced polymer[J]. Science & Technology Review,2016,34(2): 94-98 (in Chinese).
[14] [14] BARROS J A O,DALFR G M. Assessment of the effectiveness of the embedded through-section technique for the shear strengthening of reinforced concrete beams[J]. Strain,2013,49(1): 75-93.
[15] [15] CARO M,JEMAA Y,DIRAR S,et al. Bond performance of deep embedment FRP bars epoxy-bonded into concrete[J]. Engineering Structures,2017,147: 448-457.
[16] [16] SUN X Y,GAO C,WANG H L. Bond performance between BFRP bars and 3D printed concrete[J]. Construction and Building Materials,2021,269: 121325.
[17] [17] MURCIA-DELSO J,STAVRIDIS A,SHING P B. Bond strength and cyclic bond deterioration of large-diameter bars[J]. ACI Structural Journal,2013,110(4): 659-669.
Get Citation
Copy Citation Text
ZHOU Xun, LIU Genjin, WANG Yinhui, LI Hedong, GENG Jian, XIE Weihong, NI Kun. Bond Performance Between Embedded Rebar and 3D Printed Mortar[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(5): 1633
Special Issue:
Received: Jan. 26, 2024
Accepted: --
Published Online: Aug. 15, 2024
The Author Email: Genjin LIU (liugenjin@163.com)
CSTR:32186.14.