[1] [1] Zhang J L, Song B, Wei Q S, Bourell D and Shi Y S 2019 A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends J. Mater. Sci. Technol.35 270–84

[2] [2] Williams J C and Starke J E A 2003 Progress in structural materials for aerospace systems Acta Mater.51 5775–99

[3] [3] Heinz A, Haszler A, Keidel C, Moldenhauer S, Benedictus R and Miller W S 2000 Recent development in aluminium alloys for aerospace applications Mater. Sci. Eng. A 280 102–7

[4] [4] Polmear I J and Couper M J 1988 Design and development of an experimental wrought aluminum alloy for use at elevated temperatures Metall. Trans. A 19 1027–35

[5] [5] Seifi M, Ghamarian I, Samimi P, Collins P C, Holroyd N J H and Lewandowski J J 2018 Sensitization and remediation effects on environmentally assisted cracking of Al-Mg naval alloys Corros. Sci.138 219–41

[6] [6] Gao Y H, Liu G and Sun J 2021 Recent progress in high-temperature resistant aluminum-based alloys: microstructural design and precipitation strategy Acta Metall. Sin.57 129–49

[7] [7] Yong-fei J, Guo-shuai N, Yang Y, Yong-bing D, Jiao Z, Yan-feng H and Bao-de S 2023 Knowledge-aware design of high-strength aviation aluminum alloys via machine learning J. Mater. Res. Technol.24 346–61

[8] [8] De Luca A, Dunand D C and Seidman D N 2018 Scandium-enriched nanoprecipitates in aluminum providing enhanced coarsening and creep resistance Light Metals 2018 ed O Martin (Springer) pp 1589–94

[9] [9] Tan Z Q, Zhang Q, Guo X Y, Zhao W J, Zhou C S and Liu Y 2020 New development of powder metallurgy in automotive industry J. Cent. South Univ.27 1611–23

[10] [10] Czerwinski F, Kasprzak W, Sediako D, Emadi D, Shaha S, Friedman J and Chen D L 2016 High-temperature aluminum alloys for automotive powertrains AM&P Tech. Art.174 16–21

[11] [11] Ali Y, Qiu D, Jiang B, Pan F S and Zhang M X 2015 Current research progress in grain refinement of cast magnesium alloys: a review article J. Alloys Compd.619 639–51

[12] [12] Deng L, Wang X Y, Jin J S and Xia J C 2018 Precision forging technology for aluminum alloy Front. Mech. Eng.13 25–36

[13] [13] Demirci H and Evlen H 2012 Effect of extrusion ratio on the wear behaviour of Al-Si and Al-Mg alloys J. Alloys Compd.510 26–32

[14] [14] Kumar N and Bharti A 2021 Review on powder metallurgy: a novel technique for recycling and foaming of aluminium-based materials Powder Metall. Met. Ceram.60 52–59

[15] [15] Zhang Y L, Luo W Z, Zeng J M, Li X X, Hu L and Deng D A 2022 Preventing crack in an aluminum alloy complex structure during welding process based on numerical simulation technology Crystals12 1742

[16] [16] Hong K M and Shin Y C 2017 Prospects of laser welding technology in the automotive industry: a review J. Mater. Process. Technol.245 46–69

[17] [17] Ye H Z, Liu X Y and Hong H P 2008 Fabrication of metal matrix composites by metal injection molding—A review J. Mater. Process. Technol.200 12–24

[18] [18] Wei C, Zhang Z Z, Cheng D X, Sun Z, Zhu M H and Li L 2021 An overview of laser-based multiple metallic material additive manufacturing: from macro- to micro-scales Int. J. Extrem. Manuf.3 012003

[19] [19] Ren W F, Xu J K, Lian Z X, Sun X Q, Xu Z M and Yu H D 2022 Localized electrodeposition micro additive manufacturing of pure copper microstructures Int. J. Extrem. Manuf.4 015101

[20] [20] Sun Q S, Xue Z X, Chen Y, Xia R D, Wang J M, Xu S, Zhang J and Yue Y A 2022 Modulation of the thermal transport of micro-structured materials from 3D printing Int. J. Extrem. Manuf.4 015001

[21] [21] Bandyopadhyay A, Mitra I, Avila J D, Upadhyayula M and Bose S 2023 Porous metal implants: processing, properties, and challenges Int. J. Extrem. Manuf.5 032014

[22] [22] Tan C L, Deng C, Li S, Abena A, Jamshidi P, Essa K, Wu L K, Xu G H, Attallah M M and Liu J 2022 Mechanical property and biological behaviour of additive manufactured TiNi functionally graded lattice structure Int. J. Extrem. Manuf.4 045003

[23] [23] Wei S S, Zhang J L, Zhang L, Zhang Y J, Song B, Wang X B, Fan J X, Liu Q and Shi Y S 2023 Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: a review Int. J. Extrem. Manuf.5 032001

[24] [24] Chen W, Gu D D, Yang J K, Yang Q, Chen J and Shen X F 2022 Compressive mechanical properties and shape memory effect of NiTi gradient lattice structures fabricated by laser powder bed fusion Int. J. Extrem. Manuf.4 045002

[25] [25] Liu T S, Chen P, Qiu F, Yang H Y, Jin N T Y, Chew Y, Wang D, Li R D, Jiang Q C and Tan C L 2024 Review on laser directed energy deposited aluminum alloys Int. J. Extrem. Manuf.6 022004

[26] [26] Du Plessis A, Razavi N, Benedetti M, Murchio S, Leary M, Watson M, Bhate D and Berto F 2022 Properties and applications of additively manufactured metallic cellular materials: a review Prog. Mater. Sci.125 100918

[27] [27] Zheng H D, Liu L L, Deng C L, Shi Z F and Ning C Y 2019 Mechanical properties of AM Ti6Al4V porous scaffolds with various cell structures Rare Met.38 561–70

[28] [28] Wei C, Gu H, Gu Y C, Liu L C, Huang Y H, Cheng D X, Li Z Q and Li L 2022 Abnormal interfacial bonding mechanisms of multi-material additive-manufactured tungsten–stainless steel sandwich structure Int. J. Extrem. Manuf.4 025002

[29] [29] Zhang T L, Huang Z H, Yang T, Kong H J, Luan J H, Wang A D, Wang D, Kuo W, Wang Y Z and Liu C T 2021 In situ design of advanced titanium alloy with concentration modulations by additive manufacturing Science374 478–82

[30] [30] Karabulut Y and nal R 2022 Additive manufacturing of ceramic particle-reinforced aluminum-based metal matrix composites: a review J. Mater. Sci.57 19212–42

[31] [31] Zhang C H, Li Z, Zhang J K, Tang H B and Wang H M 2023 Additive manufacturing of magnesium matrix composites: comprehensive review of recent progress and research perspectives J. Magnesium Alloys11 425–61

[32] [32] Zhou Y Q, Kong D C, Li R X, He X and Dong C F 2024 Corrosion of duplex stainless steel manufactured by laser powder bed fusion: a critical review Acta Metall. Sin.37 587–606

[33] [33] Murr L E and Johnson W L 2017 3D metal droplet printing development and advanced materials additive manufacturing J. Mater. Res. Technol.6 77–89

[34] [34] Kaikai X, Yadong G and Qiang Z 2023 Comparison of traditional processing and additive manufacturing technologies in various performance aspects: a review Arch. Civ. Mech. Eng.23 188

[35] [35] DebRoy T, Wei H L, Zuback J S, Mukherjee T, Elmer J W, Milewski J O, Beese A M, Wilson-Heid A, De A and Zhang W 2018 Additive manufacturing of metallic components-Process, structure and properties Prog. Mater. Sci.92 112–224

[36] [36] Prashanth K G, Scudino S, Klauss H J, Surreddi K B, Lber L, Wang Z, Chaubey A K, Khn U and Eckert J 2014 Microstructure and mechanical properties of Al–12Si produced by selective laser melting: effect of heat treatment Mater. Sci. Eng. A 590 153–60

[37] [37] Sing S L, An J, Yeong W Y and Wiria F E 2016 Laser and electron-beam powder-bed additive manufacturing of metallic implants: a review on processes, materials and designs J. Orthop. Res.34 369–85

[38] [38] Chen L Y, Qin P, Zhang L N and Zhang L C 2024 An overview of additively manufactured metal matrix composites: preparation, performance, and challenge Int. J. Extrem. Manuf.6 44

[39] [39] Luo M J, Li R D, Zheng D, Kang J T, Wu H T, Deng S H and Niu P D 2023 Formation mechanism of inherent spatial heterogeneity of microstructure and mechanical properties of NiTi SMA prepared by laser directed energy deposition Int. J. Extrem. Manuf.5 035005

[40] [40] Sui S, Chew Y, Weng F, Tan C L, Du Z L and Bi G J 2022 Study of the intrinsic mechanisms of nickel additive for grain refinement and strength enhancement of laser aided additively manufactured Ti–6Al–4V Int. J. Extrem. Manuf.4 035102

[41] [41] Trevisan F, Calignano F, Lorusso M, Pakkanen J, Aversa A, Ambrosio E P, Lombardi M, Fino P and Manfredi D 2017 On the selective laser melting (SLM) of the AlSi10Mg alloy: process, microstructure, and mechanical properties Materials10 76

[42] [42] Kekana N, Shongwe M B, Mpofu K and Muvunzi R 2022 A review on factors influencing mechanical properties of AlSi12 alloy processed by selective laser melting Int. J. Adv. Manuf. Technol.121 4313–23

[43] [43] Spierings A B, Dawson K, Heeling T, Uggowitzer P J, Schublin R, Palm F and Wegener K 2017 Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting Mater. Des.115 52–63

[44] [44] Spierings A B, Dawson K, Voegtlin M, Palm F and Uggowitzer P J 2016 Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting CIRP Ann-Manuf. Technol.65 213–6

[45] [45] Uzan N E, Shneck R, Yeheskel O and Frage N 2018 High-temperature mechanical properties of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting technologies (AM-SLM) Addit. Manuf.24 257–63

[46] [46] Wu J, Wang X Q, Wang W, Attallah M M and Loretto M H 2016 Microstructure and strength of selectively laser melted AlSi10Mg Acta Mater.117 311–20

[47] [47] Schimbck D, Kaserer L, Mair P, Palm F, Leichtfried G, Pogatscher S and Hohenwarter A 2023 Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure Int. J. Fatigue172 107592

[48] [48] Yang X Y, Cai R, Chen C Y, Araby S, Li Y H, Wang W and Meng Q S 2022 High-performance aluminum alloy with fully equiaxed grain microstructure fabricated by laser metal deposition J. Mater. Res.37 3658–67

[49] [49] Awd M, Tenkamp J, Hirtler M, Siddique S, Bambach M and Walther F 2018 Comparison of microstructure and mechanical properties of scalmalloy® produced by selective laser melting and laser metal deposition Materials11 17

[50] [50] Knipling K E, Seidman D N and Dunand D C 2011 Ambient- and high-temperature mechanical properties of isochronally aged Al-0.06Sc, Al-0.06Zr and Al-0.06Sc-0.06Zr (at.%) alloys Acta Mater.59 943–54

[51] [51] Chen B A, Pan L, Wang R H, Liu G, Cheng P M, Xiao L and Sun J 2011 Effect of solution treatment on precipitation behaviors and age hardening response of Al-Cu alloys with Sc addition Mater. Sci. Eng. A 530 607–17

[52] [52] Spierings A B, Dawson K, Kern K, Palm F and Wegener K 2017 SLM-processed Sc-and Zr- modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment Mater. Sci. Eng. A 701 264–73

[53] [53] Mehta B, Svanberg A and Nyborg L 2022 Laser powder bed fusion of an Al-Mg-Sc-Zr alloy: manufacturing, peak hardening response and thermal stability at peak hardness Metals12 57

[54] [54] Kusoglu I M, Gkce B and Barcikowski S 2020 Research trends in laser powder bed fusion of Al alloys within the last decade Addit. Manuf.36 18

[55] [55] Michi R A, Plotkowski A, Shyam A, Dehoff R R and Babu S S 2022 Towards high-temperature applications of aluminium alloys enabled by additive manufacturing Int. Mater. Rev.67 298–345

[56] [56] Liu Z Z, Zhou Q H, Liang X K, Wang X B, Li G C, Vanmeensel K and Xie J X 2024 Alloy design for laser powder bed fusion additive manufacturing: a critical review Int. J. Extrem. Manuf.6 022002

[57] [57] Li C, Fu C H, Guo Y B and Fang F Z 2016 A multiscale modeling approach for fast prediction of part distortion in selective laser melting J. Mater. Process. Technol.229 703–12

[58] [58] Hussein A, Hao L, Yan C Z and Everson R 2013 Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting Mater. Des.52 638–47

[59] [59] Wang L, Guo Q L, Chen L Y and Yan W T 2023 In-situ experimental and high-fidelity modeling tools to advance understanding of metal additive manufacturing Int. J. Mach. Tools Manuf.193 45

[60] [60] Su J L et al 2024 Recent innovations in laser additive manufacturing of titanium alloys Int. J. Extrem. Manuf.6 032001

[61] [61] Lv J M, Liang Y C, Xu X, Xu G, Zhang H M, Lu H F, Luo K Y, Cai J and Lu J Z 2024 Performance-control-orientated hybrid metal additive manufacturing technologies: state of the art, challenges, and future trends Int. J. Extrem. Manuf.6 032009

[62] [62] Hu Y B 2021 Recent progress in field-assisted additive manufacturing: materials, methodologies, and applications Mater. Horiz.8 885–911

[63] [63] ISO/ASTM International 2021 Additive Manufacturing—General Principles—Fundamentals and Vocabulary 2nd edn (BSI British Standards) (https://doi.org/10.3403/30448424)

[64] [64] Yi H, Jia L, Ding J L and Li H J 2024 Achieving material diversity in wire arc additive manufacturing: leaping from alloys to composites via wire innovation Int. J. Mach. Tools Manuf.194 53

[65] [65] Li Y, Su C and Zhu J J 2022 Comprehensive review of wire arc additive manufacturing: hardware system, physical process, monitoring, property characterization, application and future prospects Results Eng.13 100330

[66] [66] Shen Q K, Kong X D and Chen X Z 2021 Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): microstructure and mechanical properties J. Mater. Sci. Technol.74 136–42

[67] [67] Martina F, Ding J L, Williams S, Caballero A, Pardal G and Quintino L 2019 Tandem metal inert gas process for high productivity wire arc additive manufacturing in stainless steel Addit. Manuf.25 545–50

[68] [68] Li H Z, Wang C M, Zhang H, Zhang J J, He P, Shao M H, Zhu X T and Fu Y Q 2023 Research progress of friction stir additive manufacturing technology Acta Metall. Sin.59 106–24

[69] [69] Wang W J, Ning J Q, Garmestani H and Liang S Y 2022 Analytical prediction of molten pool dimensions in powder bed fusion considering process conditions-dependent laser absorptivity Appl. Sci.12 11926

[70] [70] Huang G Q, Shen T and Li B 2024 Microstructural evolution modelling and low-stress fatigue performance of bimodal-structured Al-Mg-Sc-Zr alloy produced by laser powder bed fusion additive manufacturing Virtual Phys. Prototyp.19 e2346287

[71] [71] Vukkum V B and Gupta R K 2022 Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure Mater. Des.221 45

[72] [72] Xiao Z, Yu W H, Fu H X, Deng Y J, Wu Y L and Zheng H Y 2023 Recent progress on microstructure manipulation of aluminium alloys manufactured via laser powder bed fusion Virtual Phys. Prototyp.18 e2125880

[73] [73] Lee H, Lim C H J, Low M J, Tham N, Murukeshan V M and Kim Y J 2017 Lasers in additive manufacturing: a review Int. J. Precis. Eng. Manuf.-Green Technol.4 307–22

[74] [74] Thyagarajan K and Ghatak A 2011 Lasers: Fundamentals and Applications 2nd edn (Springer)

[75] [75] Sun S H, Hagihara K, Ishimoto T, Suganuma R, Xue Y F and Nakano T 2021 Comparison of microstructure, crystallographic texture, and mechanical properties in Ti–15Mo–5Zr–3Al alloys fabricated via electron and laser beam powder bed fusion technologies Addit. Manuf.47 102329

[76] [76] Murr L E 2018 A metallographic review of 3D printing/additive manufacturing of metal and alloy products and components Metallogr. Microstruct. Anal.7 103–32

[77] [77] Zhang L C, Liu Y J, Li S J and Hao Y L 2018 Additive manufacturing of titanium alloys by electron beam melting: a review Adv. Eng. Mater.20 1700842

[78] [78] Murr L E, Gaytan S M, Ramirez D A, Martinez E, Hernandez J, Amato K N, Shindo P W, Medina F R and Wicker R B 2012 Metal fabrication by additive manufacturing using laser and electron beam melting technologies J. Mater. Sci. Technol.28 1–14

[79] [79] Mostafaei A et al 2022 Defects and anomalies in powder bed fusion metal additive manufacturing Curr. Opin. Solid State Mater. Sci.26 100974

[80] [80] Fujii H T, Shimizu S, Sato Y S and Kokawa H 2017 High-strain-rate deformation in ultrasonic additive manufacturing Scr. Mater.135 125–9

[81] [81] Sames W J, List F A, Pannala S, Dehoff R R and Babu S S 2016 The metallurgy and processing science of metal additive manufacturing Int. Mater. Rev.61 315–60

[82] [82] Hwang J Y, Banerjee R, Doty H W and Kaufman M J 2009 The effect of Mg on the structure and properties of Type 319 aluminum casting alloys Acta Mater.57 1308–17

[83] [83] Irizalp S G and Saklakoglu N 2014 Effect of Fe-rich intermetallics on the microstructure and mechanical properties of thixoformed A380 aluminum alloy Eng. Sci. Technol. Int. J.17 58–62

[84] [84] Karamouz M, Azarbarmas M, Emamy M and Alipour M 2013 Microstructure, hardness and tensile properties of A380 aluminum alloy with and without Li additions Mater. Sci. Eng. A 582 409–14

[85] [85] Colley L J, Wells M A and Poole W J 2014 Microstructure–strength models for heat treatment of Al–Si–Mg casting alloys I: microstructure evolution and precipitation kinetics Can. Metall. Q.53 125–37

[86] [86] Colombo M, Gariboldi E and Morri A 2017 Er addition to Al-Si-Mg-based casting alloy: effects on microstructure, room and high temperature mechanical properties J. Alloys Compd.708 1234–44

[87] [87] Colombo M, Gariboldi E and Morri A 2018 Influences of different Zr additions on the microstructure, room and high temperature mechanical properties of an Al-7Si-0.4Mg alloy modified with 0.25% Er Mater. Sci. Eng. A 713 151–60

[88] [88] Kim Y and Lee J C 2006 Processing and interfacial bonding strength of 2014 Al matrix composites reinforced with oxidized SiC particles Mater. Sci. Eng. A 420 8–12

[89] [89] Dhal A, Panigrahi S K and Shunmugam M S 2015 Precipitation phenomena, thermal stability and grain growth kinetics in an ultra-fine grained Al 2014 alloy after annealing treatment J. Alloys Compd.649 229–38

[90] [90] Liu L, Wu Y X, Gong H, Dong F and Ahmad A S 2020 Modified kinetic model for describing continuous dynamic recrystallization behavior of Al 2219 alloy during hot deformation process J. Alloys Compd.817 153301

[91] [91] Qin J, Ma M Y, Tan P, Yi D Q and Wang B 2022 Effects of Sc alloying on the evolution of solidification microstructure and formation of W phase in as-cast 2519 aluminum alloys J. Alloys Compd.898 162764

[92] [92] Vaithyanathan V, Wolverton C and Chen L Q 2004 Multiscale modeling of ′ precipitation in Al–Cu binary alloys Acta Mater.52 2973–87

[93] [93] Liu H, Papadimitriou I, Lin F X and LLorca J 2019 Precipitation during high temperature aging of Al−Cu alloys: a multiscale analysis based on first principles calculations Acta Mater.167 121–35

[94] [94] Chen B A, Liu G, Wang R H, Zhang J Y, Jiang L, Song J J and Sun J 2013 Effect of interfacial solute segregation on ductile fracture of Al–Cu–Sc alloys Acta Mater.61 1676–90

[95] [95] Peng J, Bahl S, Shyam A, Haynes J A and Shin D 2020 Solute-vacancy clustering in aluminum Acta Mater.196 747–58

[96] [96] Gao Y H, Yang C, Zhang J Y, Cao L F, Liu G, Sun J and Ma E 2019 Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300 °C Mater. Res. Lett.7 18–25

[97] [97] Gao Y H et al 2020 Segregation-sandwiched stable interface suffocates nanoprecipitate coarsening to elevate creep resistance Mater. Res. Lett.8 446–53

[98] [98] Xue H, Yang C, Zhang P, Wu S H, Liu G and Sun J 2024 Heat-resistant Al alloys: microstructural design and microalloying effect J. Mater. Sci.59 9749–67

[99] [99] Chi Y T, Murali N, Zheng T Q, Liu J K and Li X C 2024 Wire-arc additive manufacturing of nano-treated aluminum alloy 2024 3D Print. Addit. Manuf.11 e529–36

[100] [100] Kenevisi M S, Yu Y F and Lin F 2021 A review on additive manufacturing of Al–Cu (2xxx) aluminium alloys, processes and defects Mater. Sci. Technol.37 805–29

[101] [101] Loh L E, Chua C K, Yeong W Y, Song J, Mapar M, Sing S L, Liu Z H and Zhang D Q 2015 Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061 Int. J. Heat Mass. Transfer80 288–300

[102] [102] Uddin S Z, Murr L E, Terrazas C A, Morton P, Roberson D A and Wicker R B 2018 Processing and characterization of crack-free aluminum 6061 using high-temperature heating in laser powder bed fusion additive manufacturing Addit. Manuf.22 405–15

[103] [103] Wang P, Li H C, Prashanth K G, Eckert J and Scudino S 2017 Selective laser melting of Al-Zn-Mg-Cu: heat treatment, microstructure and mechanical properties J. Alloys Compd.707 287–90

[104] [104] am G and Mistikoglu S 2014 Recent developments in friction stir welding of Al-alloys J. Mater. Eng. Perform.23 1936–53

[105] [105] Liu S W, Zhu H H, Peng G Y, Yin J and Zeng X Y 2018 Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis Mater. Des.142 319–28

[106] [106] Liu R P, Dong Z J and Pan Y M 2006 Solidification crack susceptibility of aluminum alloy weld metals Trans. Nonferr. Met. Soc. China16 110–6

[107] [107] Eskin D G, Suyitno S and Katgerman L 2004 Mechanical properties in the semi-solid state and hot tearing of aluminium alloys Prog. Mater. Sci.49 629–711

[108] [108] am G and pekolu G 2017 Recent developments in joining of aluminum alloys Int. J. Adv. Manuf. Technol.91 1851–66

[109] [109] Hyer H, Zhou L, Mehta A, Park S, Huynh T, Song S T, Bai Y L, Cho K, McWilliams B and Sohn Y 2021 Composition-dependent solidification cracking of aluminum-silicon alloys during laser powder bed fusion Acta Mater.208 116698

[110] [110] Xu J Y, Zhang C, Liu L X, Guo R, Sun M J and Liu L 2023 Achieving high strength in laser powder-bed fusion processed AlFeCuZr alloy via dual-nanoprecipitations and grain boundary segregation J. Mater. Sci. Technol.137 56–66

[111] [111] Hu L, Li Y, Luo G D, Shi Q W, Wang Y H, Ma S M, Cui Y C, Wang H W and Chen Z 2023 Understanding cellular structure formation in rapidly solidified Al–Ni alloys by constructing solidification microstructure selection maps Addit. Manuf.73 103671

[112] [112] Perrin A E, Michi R A, Leonard D N, Sisco K D, Plotkowski A J, Shyam A, Poplawsky J D, Allard J L F and Yang Y 2023 Effect of Mn on eutectic phase equilibria in Al-rich Al-Ce-Ni alloys J. Alloys Compd.965 171455

[113] [113] Plotkowski A, Rios O, Sridharan N, Sims Z, Unocic K, Ott R T, Dehoff R R and Babu S S 2017 Evaluation of an Al-Ce alloy for laser additive manufacturing Acta Mater.126 507–19

[114] [114] Oeser S, Preuner J, Rdler G, Pirch N and Weisheit A 2022 Laser metal deposition of a near-eutectic Al-Ni alloy Adv. Eng. Mater.24 2200696

[115] [115] Deng J W, Chen C, Liu X C, Li Y P, Zhou K C and Guo S M 2021 A high-strength heat-resistant Al-5.7Ni eutectic alloy with spherical Al3Ni nano-particles by selective laser melting Scr. Mater.203 114034

[116] [116] Wu Y Y, Zhang T M, Chen C, Hosseini S R E, Zhang X Y and Zhou K C 2022 Microstructure and mechanical property evolution of additive manufactured eutectic Al-2Fe alloy during solidification and aging J. Alloys Compd.897 163243

[117] [117] Qi X, Takata N, Suzuki A, Kobashi M and Kato M 2020 Laser powder bed fusion of a near-eutectic Al-Fe binary alloy: processing and microstructure Addit. Manuf.35 101308

[118] [118] Thapliyal S, Shukla S, Zhou L, Hyer H, Agrawal P, Agrawal P, Komarasamy M, Sohn Y and Mishra R S 2021 Design of heterogeneous structured Al alloys with wide processing window for laser-powder bed fusion additive manufacturing Addit. Manuf.42 102002

[119] [119] McDonald S D, Nogita K and Dahle A K 2004 Eutectic nucleation in Al–Si alloys Acta Mater.52 4273–80

[120] [120] Gremaud M, Allen D R, Rappaz M and Perepezko J H 1996 The development of nucleation controlled microstructures during laser treatment of Al-Si alloys Acta Mater.44 2669–81

[121] [121] Pei Y T and De Hosson J T M 2000 Functionally graded materials produced by laser cladding Acta Mater.48 2617–24

[122] [122] Stefanescu D M 2015 Science and Engineering of Casting Solidification 3rd edn (Springer)

[123] [123] Michi R A, Sisco K, Bahl S, Yang Y, Poplawsky J D, Allard L F, Dehoff R R, Plotkowski A and Shyam A 2022 A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy Acta Mater.227 117699

[124] [124] Kimura T, Nakamoto T, Ozaki T and Miki T 2021 Microstructures and mechanical properties of aluminum-transition metal binary alloys (Al-Fe, Al-Mn, and Al-Cr) processed by laser powder bed fusion J. Alloys Compd.872 159680

[125] [125] Yi M, Zhang P, Yang C, Cheng P M, Guo S W, Liu G and Sun J 2021 Improving creep resistance of Al-12 wt.% Ce alloy by microalloying with Sc Scr. Mater.198 113838

[126] [126] Rakhmonov J U, Weiss D and Dunand D C 2022 Solidification microstructure, aging evolution and creep resistance of laser powder-bed fused Al-7Ce-8Mg (wt%) Addit. Manuf.55 102862

[127] [127] Manca D R, Churyumov A Y, Pozdniakov A V, Prosviryakov A S, Ryabov D K, Krokhin A Y, Korolev V A and Daubarayte D K 2019 Microstructure and properties of novel heat resistant Al-Ce-Cu alloy for additive manufacturing Met. Mater. Int.25 633–40

[128] [128] Zhang L J, Du Y, Steinbach I, Chen Q and Huang B Y 2010 Diffusivities of an Al–Fe–Ni melt and their effects on the microstructure during solidification Acta Mater.58 3664–75

[129] [129] Vourlias G, Pistofidis N, Pavlidou E and Stergioudis G 2009 Reinforcement of Al–Fe–Ni alloys with the in situ formation of composite materials J. Alloys Compd.483 178–81

[130] [130] Engin S, Byk U and Maral N 2016 The effects of microstructure and growth rate on microhardness, tensile strength, and electrical resistivity for directionally solidified Al–Ni–Fe alloys J. Alloys Compd.660 23–31

[131] [131] Bahl S et al 2024 An additively manufactured near-eutectic Al-Ce-Ni-Mn-Zr alloy with high creep resistance Acta Mater.268 119787

[132] [132] Chang K C, Zhao J R and Hung F Y 2023 Effects of the microstructure and texture characteristics on mechanical properties of the Al–Ni–Cu–Fe alloy manufactured by laser powder bed fusion J. Mater. Res. Technol.27 3411–23

[133] [133] Ponnusamy P, Rashid R A R, Masood S H, Ruan D and Palanisamy S 2020 Mechanical properties of SLM-printed aluminium alloys: a review Materials13 4301

[134] [134] Zhang J Y and Peng J 2023 A review on aluminum alloy conductors influenced by alloying elements and thermomechanical treatments: microstructure and properties J. Mater. Res.38 1488–509

[135] [135] Gumann M, Henry S, Clton F, Wagnire J D and Kurz W 1999 Epitaxial laser metal forming: analysis of microstructure formation Mater. Sci. Eng. A 271 232–41

[136] [136] Robino C V, Michael J R and Maguire M C 1998 The solidification and welding metallurgy of galling-resistant stainless steels Weld. J.77 446-s

[137] [137] Nelson T W, Lippold J C and Mills M J 1999 Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar weld metals. Part 1—Nucleation and growth Weld. J.78 329–37

[138] [138] Samy V P N, Schfle M, Brasche F, Krupp U and Haase C 2023 Understanding the mechanism of columnar–to-equiaxed transition and grain refinement in additively manufactured steel during laser powder bed fusion Addit. Manuf.73 103702

[139] [139] Lv H, Li X D, Li Z J, Wang W X, Yang K, Li F and Xie H L 2021 Investigation on the columnar-to-equiaxed transition during laser cladding of IN718 alloy J. Manuf. Process.67 63–76

[140] [140] Gu D D, Meiners W, Wissenbach K and Poprawe R 2012 Laser additive manufacturing of metallic components: materials, processes and mechanisms Int. Mater. Rev.57 133–64

[141] [141] Zhang J L, Gao J B, Song B, Zhang L J, Han C J, Cai C, Zhou K and Shi Y S 2021 A novel crack-free Ti-modified Al-Cu-Mg alloy designed for selective laser melting Addit. Manuf.38 101829

[142] [142] Zhang J L, Yuan W H, Song B, Yin S, Wang X B, Wei Q S and Shi Y S 2022 Towards understanding metallurgical defect formation of selective laser melted wrought aluminum alloys Adv. Powder Mater.1 100035

[143] [143] Zhang J L, Gao J B, Yang S L, Song B, Zhang L J, Lu J and Shi Y S 2023 Breaking the strength–ductility trade-off in additively manufactured aluminum alloys through grain structure control by duplex nucleation J. Mater. Sci. Technol.152 201–11

[144] [144] Martin J H, Yahata B D, Hundley J M, Mayer J A, Schaedler T A and Pollock T M 2017 3D printing of high-strength aluminium alloys Nature549 365–9

[145] [145] Tan Q Y, Yin Y and Zhang M X 2023 Comparison of the grain-refining efficiencies of Ti and LaB6 inoculants in additively manufactured 2024 aluminum alloy: the important role of solutes Metals13 1490

[146] [146] Zhang H, Zhu H H, Qi T, Hu Z H and Zeng X Y 2016 Selective laser melting of high strength Al-Cu-Mg alloys: processing, microstructure and mechanical properties Mater. Sci. Eng. A 656 47–54

[147] [147] Tan Q Y et al 2021 A novel strategy to additively manufacture 7075 aluminium alloy with selective laser melting Mater. Sci. Eng. A 821 141638

[148] [148] Oropeza D, Hofmann D C, Williams K, Firdosy S, Bordeenithikasem P, Sokoluk M, Liese M, Liu J K and Li X C 2020 Welding and additive manufacturing with nanoparticle-enhanced aluminum 7075 Wire J. Alloys Compd.834 154987

[149] [149] Su Y T, Wang Y C and Shi J 2022 Microstructure and mechanical properties of laser DED produced crack-free Al 7075 alloy: effect of process parameters and heat treatment Mater. Sci. Eng. A 857 144075

[150] [150] Chi Y T, Murali N, Liu J K, Liese M and Li X C 2023 Wire arc additive manufacturing (WAAM) of nanotreated aluminum alloy 6061 Rapid Prototyp. J.29 1341–9

[151] [151] Jia Q B, Rometsch P, Krnsteiner P, Chao Q, Huang A J, Weyland M, Bourgeois L and Wu X H 2019 Selective laser melting of a high strength Al-Mn-Sc alloy: alloy design and strengthening mechanisms Acta Mater.171 108–18

[152] [152] Nie X J, Zhang H, Zhu H H, Hu Z H, Ke L D and Zeng X Y 2018 Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys J. Alloys Compd.764 977–86

[153] [153] Martin J H et al 2020 Grain refinement mechanisms in additively manufactured nano-functionalized aluminum Acta Mater.200 1022–37

[154] [154] Chen Y, Xiao C W, Zhu S, Li Z W, Yang W X, Zhao F, Yu S F and Shi Y S 2022 Microstructure characterization and mechanical properties of crack-free Al-Cu-Mg-Y alloy fabricated by laser powder bed fusion Addit. Manuf.58 103006

[155] [155] Bi J, Lei Z L, Chen Y B, Chen X, Lu N N, Tian Z and Qin X K 2021 An additively manufactured Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy with high specific strength, good thermal stability and excellent corrosion resistance J. Mater. Sci. Technol.67 23–35

[156] [156] Bi J et al 2022 Microstructure, tensile properties and heat-resistant properties of selective laser melted AlMgScZr alloy under long-term aging treatment Mater. Sci. Eng. A 833 142527

[157] [157] Wang X M 2024 Additive manufacturing using Al-Cu-Mg-Sc-TiB2 composite powders to overcome the strength-ductility trade-off JOM76 71–83

[158] [158] Lei Z L, Bi J, Chen Y B, Chen X, Tian Z and Qin X K 2020 Effect of TiB2 content on microstructural features and hardness of TiB2/AA7075 composites manufactured by LMD J. Manuf. Process.53 283–92

[159] [159] Tan H, Hao D P, Al-Hamdani K, Zhang F Y, Xu Z K and Clare A T 2018 Direct metal deposition of TiB2/AlSi10Mg composites using satellited powders Mater. Lett.214 123–6

[160] [160] Kumar M S, Mohan E, Robinson S and Prasad D T 2022 Comparative study on morphological, physical and mechanical characteristics of L-PBF based AlSi10Mg parts with conventional stir casted Al-10% SiC composites Silicon14 2695–706

[161] [161] Gu D D, Chang F and Dai D H 2015 Selective laser melting additive manufacturing of novel aluminum based composites with multiple reinforcing phases J. Manuf. Sci. Eng.137 021010

[162] [162] Xie H B, Zhang J L, Li F L, Yuan G Q, Zhu Q, Jia Q L, Zhang H J and Zhang S W 2021 Selective laser melting of SiCp/Al composites: densification, microstructure, and mechanical and tribological properties Ceram. Int.47 30826–37

[163] [163] Huang X, Wang L, Huang W D, He D D, Cheng X H, Xu X P, Chen X X, Qin S S and Huang L H 2023 Microstructure development, mechanical properties and underlying mechanism of micro-tin-reinforced AlSi10Mg composites fabricated by selective laser melting J. Min. Metall. B 59 169–82

[164] [164] Tang H, Xi X Y, Gao C F, Liu Z Q, Zhang J T, Zhang W W, Xiao Z Y and Rao J H 2024 Microstructure evolution and strengthening mechanisms of a high-performance TiN-reinforced Al-Mn-Mg-Sc-Zr alloy processed by laser powder bed fusion J. Mater. Sci. Technol.187 86–100

[165] [165] Gao C, Wu W, Shi J, Xiao Z and Akbarzadeh A H 2020 Simultaneous enhancement of strength, ductility, and hardness of TiN/AlSi10Mg nanocomposites via selective laser melting Addit. Manuf.34 101378

[166] [166] Abu-Odeh A, Cottura M and Asta M 2020 Insights into dislocation climb efficiency in FCC metals from atomistic simulations Acta Mater.193 172–81

[167] [167] Peng L M and Zhu S J 2003 Creep of metal matrix composites reinforced by combining nano-sized dispersoids with micro-sized ceramic particulates or whiskers (review) Int. J. Mater. Prod. Technol.18 215–54

[168] [168] Henderson H B et al 2021 Enhanced thermal coarsening resistance in a nanostructured aluminum-cerium alloy produced by additive manufacturing Mater. Des.209 109988

[169] [169] Knipling K E, Dunand D C and Seidman D N 2006 Criteria for developing castable, creep-resistant aluminum-based alloys—A review Z. Met.97 246–65

[170] [170] Premkumar M K, Lawley A and Koczak M J 1992 Processing and microstructure of powder metallurgy Al-Fe-Ni alloys Metall. Trans. A 23 3219–30

[171] [171] Silva B L, Dessi J G, Gomes L F, Peres M M, Cant M V and Spinelli J E 2017 Assessing microstructures and mechanical resistances of as-atomized and as-extruded samples of Al-1wt%Fe-1wt%Ni alloy J. Alloys Compd.691 952–60

[172] [172] Cant M V, Brito C, Spinelli J E and Garcia A 2013 Interrelation of cell spacing, intermetallic compounds and hardness on a directionally solidified Al–1.0Fe–1.0Ni alloy Mater. Des.51 342–6

[173] [173] Krainikov A V and Neikov O D 2012 Rapidly solidified high-temperature aluminum alloys. I. Structure Powder Metall. Met. Ceram.51 399–411

[174] [174] Li C M, Cheng N P, Chen Z Q, Xie Z J and Hui L L 2018 Intermetallic growth and interfacial properties of the grain refiners in Al alloys Materials11 636

[175] [175] Yang K V, Shi Y J, Palm F, Wu X H and Rometsch P 2018 Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting Scr. Mater.145 113–7

[176] [176] Ding R, Deng J W, Liu X C, Wu Y Y, Geng Z W, Li D, Zhang T M, Chen C and Zhou K C 2023 Enhanced mechanical properties and thermal stability in additively manufactured Al-Ni alloy by Sc addition J. Alloys Compd.934 167894

[177] [177] Srinivasan S, Desch P B and Schwarz R B 1991 Metastable phases in the Al3X (X=Ti, Zr, and Hf) intermetallic system Scr. Metall. Mater.25 2513–6

[178] [178] Nie J F and Muddle B C 2008 Strengthening of an Al–Cu–Sn alloy by deformation-resistant precipitate plates Acta Mater.56 3490–501

[179] [179] Zhu Z G, Ng F L, Seet H L, Lu W J, Liebscher C H, Rao Z Y, Raabe D and Nai S M L 2022 Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation Mater. Today52 90–101

[180] [180] Lu Y X, Zhang H, Xue P, Wu L H, Liu F C, Jia L L, Ni D R, Xiao B and Ma Z Y 2023 Microstructural evaluation and tensile properties of Al-Mg-Sc-Zr alloys prepared by LPBF Crystals13 913

[181] [181] Figueiredo R B, Kawasaki M and Langdon T G 2023 Seventy years of Hall-Petch, ninety years of superplasticity and a generalized approach to the effect of grain size on flow stress Prog. Mater. Sci.137 101131

[182] [182] Li Q G, Li G C, Lin X, Zhu D M, Jiang J H, Shi S Q, Liu F G, Huang W D and Vanmeensel K 2022 Development of a high strength Zr/Sc/Hf-modified Al-Mn-Mg alloy using laser powder bed fusion: design of a heterogeneous microstructure incorporating synergistic multiple strengthening mechanisms Addit. Manuf.57 102967

[183] [183] Cordero Z C, Knight B E and Schuh C A 2016 Six decades of the Hall–Petch effect—a survey of grain-size strengthening studies on pure metals Int. Mater. Rev.61 495–512

[184] [184] Ryen , Holmedal B, Nijs O, Nes E, Sjlander E and Ekstrm H E 2006 Strengthening mechanisms in solid solution aluminum alloys Metall. Mater. Trans. A 37 1999–2006

[185] [185] Lugovy M, Slyunyayev V and Brodnikovskyy M 2021 Solid solution strengthening in multicomponent fcc and bcc alloys: analytical approach Prog. Nat. Sci.31 95–104

[186] [186] Qi X, Takata N, Suzuki A, Kobashi M and Kato M 2022 Change in microstructural characteristics of laser powder bed fused Al–Fe binary alloy at elevated temperature J. Mater. Sci. Technol.97 38–53

[187] [187] Wang Y T, Li R D, Yuan T C, Zou L, Wang M B and Yang H O 2021 Microstructure and mechanical properties of Al-Fe-Sc-Zr alloy additively manufactured by selective laser melting Mater. Charact.180 111397

[188] [188] Tian T, Zha M, Jia H L, Hua Z M, Ma P K and Wang H Y 2023 The effect of high solid solution Mg contents (7–13 wt%) on the dynamic strain aging behavior of Al–Mg alloys Mater. Sci. Eng. A 880 145376

[189] [189] Kendig K L and Miracle D B 2002 Strengthening mechanisms of an Al-Mg-Sc-Zr alloy Acta Mater.50 4165–75

[190] [190] Canadinc D, Maier H J, Gabor P and May J 2008 On the cyclic deformation response of ultrafine-grained Al–Mg alloys at elevated temperatures Mater. Sci. Eng. A 496 114–20

[191] [191] Li X P, Wang X J, Saunders M, Suvorova A, Zhang L C, Liu Y J, Fang M H, Huang Z H and Sercombe T B 2015 A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility Acta Mater.95 74–82

[192] [192] Chen K J, Hung F Y, Lui T S and Tsai C L 2020 Improving the applicability of wear-resistant Al-10Si-0.5 Mg alloy obtained through selective laser melting with T6 treatment in high-temperature, and high-wear environments J. Mater. Res. Technol.9 9242–52

[193] [193] Manca D R, Churyumov A Y, Pozdniakov A V, Ryabov D K, Korolev V A and Daubarayte D K 2019 Novel heat-resistant Al-Si-Ni-Fe alloy manufactured by selective laser melting Mater. Lett.236 676–9

[194] [194] Yang H N, Wang S R, Duan X N, Wang G Q, Gao S P and Xiao Z 2023 Microstructure and mechanical properties of Al–18Si–10Cu–10Ni–5Mn(−5Mg) heat-resistant aluminum alloys prepared by laser-directed energy deposition Mater. Sci. Eng. A 883 145512

[195] [195] Qi J F, Liu C Y, Chen Z W, Liu Z Y, Tian J S, Feng J, Okulov I V, Eckert J and Wang P 2022 Enhancement in strength and thermal stability of selective laser melted Al-12Si by introducing titanium nanoparticles Mater. Sci. Eng. A 855 143833

[196] [196] Zhang H R and Liu Y Z 2023 Microstructures and elevated temperature mechanical properties of AlSi12Cu4Ni2 fabricated by laser powder bed fusion J. Manuf. Process.90 418–28

[197] [197] Cui R, Wang L, Su Y Q, Li B Q, Yao L H, Wang B B, Luo L S, Chen R R, Guo J J and Tan X P 2024 Multiscale microstructure containing nanometer-scale precipitations and stacking faults yields a high-strength Al-5Cu alloy by electron beam freeform fabrication Acta Mater.266 119682

[198] [198] Shower P, Poplawsky J, Bahl S and Shyam A 2021 The role of Si in determining the stability of the ′ precipitate in Al-Cu-Mn-Zr alloys J. Alloys Compd.862 158152

[199] [199] Bahl S et al 2021 Aging behavior and strengthening mechanisms of coarsening resistant metastable ′ precipitates in an Al-Cu alloy Mater. Des.198 109378

[200] [200] Shyam A, Plotkowski A, Bahl S, Sisco K, Allard L F, Yang Y, Haynes J A and Dehoff R R 2020 An additively manufactured AlCuMnZr alloy microstructure and tensile mechanical properties Materialia12 100758

[201] [201] Michi R A, Bahl S, Fancher C M, Sisco K, Allard L F, An K, Yu D J, Dehoff R R, Plotkowski A and Shyam A 2023 Load shuffling during creep deformation of an additively manufactured AlCuMnZr alloy Acta Mater.244 118557

[202] [202] Wang Y F, Lin X, Zhao Y F, Wang Z H, Yu X B, Gao X H and Huang W D 2023 Laser powder bed fusion of Zr-modified Al-Cu-Mg alloy: processability and elevated-temperature mechanical properties J. Mater. Sci. Technol.136 223–35

[203] [203] Wang Y F, Lin X, Zhao Y F, Wang Q, Feng Z, Yang H O and Huang W D 2022 Selective laser melted Al–Cu–Mg–Zr alloy with ष-phase precipitation and excellent moderate-temperature tensile properties Mater. Sci. Eng. A 861 144368

[204] [204] Bahl S, Plotkowski A, Sisco K, Leonard D N, Allard L F, Michi R A, Poplawsky J D, Dehoff R and Shyam A 2021 Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy Acta Mater.220 117285

[205] [205] Bahl S et al 2021 Al-Cu-Ce(-Zr) alloys with an exceptional combination of additive processability and mechanical properties Addit. Manuf.48 102404

[206] [206] Theska F, Yang Y, Sisco K D, Plotkowski A and Primig S 2022 On the high-temperature stability of the Al8Cu3Ce intermetallic in an additively manufactured Al-Cu-Ce-Zr alloy Mater. Charact.191 112109

[207] [207] Schmidtke K, Palm F, Hawkins A and Emmelmann C 2011 Process and mechanical properties: applicability of a scandium modified al-alloy for laser additive manufacturing Phys. Proc.12 369–74

[208] [208] Bi J, Lei Z L, Chen Y B, Chen X, Tian Z, Lu N N, Qin X K and Liang J W 2021 Microstructure, tensile properties and thermal stability of AlMgSiScZr alloy printed by laser powder bed fusion J. Mater. Sci. Technol.69 200–11

[209] [209] Zhao J R, Lee L Y, Chang K C and Hung F Y 2022 A novel two-stage heat treatment with medium-temperature aging influence on microstructure, Al3(Sc, Zr) nanoprecipitation, and application properties, enhancing selective laser melting of Al-Mg-Sc-Zr alloy Nanomaterials12 2078

[210] [210] Fang H J, Liu H, Yan Y, Luo X E, Xu X C, Chu X, Lu Y J, Yu K and Wang D G 2021 Evolution of texture, microstructure, tensile strength and corrosion properties of annealed Al–Mg–Sc–Zr alloys Mater. Sci. Eng. A 804 140682

[211] [211] Sawtell R R and Jensen C L 1990 Mechanical properties and microstructures of Al-Mg-Sc alloys Metall. Trans. A 21 421–30

[212] [212] Wang Z H, Lin X, Kang N, Hu Y L, Chen J and Huang W D 2020 Strength-ductility synergy of selective laser melted Al-Mg-Sc-Zr alloy with a heterogeneous grain structure Addit. Manuf.34 101260

[213] [213] Croteau J R, Griffiths S, Rossell M D, Leinenbach C, Kenel C, Jansen V, Seidman D N, Dunand D C and Vo N Q 2018 Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting Acta Mater.153 35–44

[214] [214] Griffiths S, Croteau J R, Rossell M D, Erni R, De Luca A, Vo N Q, Dunand D C and Leinenbach C 2020 Coarsening- and creep resistance of precipitation-strengthened Al-Mg-Zr alloys processed by selective laser melting Acta Mater.188 192–202

[215] [215] Xu R, Li R D, Yuan T C, Zhu H B, Wang M B, Li J F, Zhang W and Cao P 2022 Laser powder bed fusion of Al-Mg-Zr alloy: microstructure, mechanical properties and dynamic precipitation Mater. Sci. Eng. A 859 144181

[216] [216] Li R D, Wang M B, Li Z M, Cao P, Yuan T C and Zhu H B 2020 Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: crack-inhibiting and multiple strengthening mechanisms Acta Mater.193 83–98

[217] [217] Zhou L, Huynh T, Park S, Hyer H, Mehta A, Song S T, Bai Y L, McWilliams B, Cho K and Sohn Y 2020 Laser powder bed fusion of Al-10 wt% Ce alloys: microstructure and tensile property J. Mater. Sci.55 14611–25

[218] [218] Yang Z W, Chen C, Li D, Wu Y Y, Geng Z W, Konakov V and Zhou K C 2023 An additively manufactured heat-resistant Al-Ce-Sc-Zr alloy: microstructure, mechanical properties and thermal stability Mater. Sci. Eng. A 872 144965

[219] [219] Lv H Y, Peng P, Feng T, Gao H Y, Ju J, Wang B, Wang J and Sun B D 2022 High-performance co-continuous Al-Ce-Mg alloy with in-situ nano-network structure fabricated by laser powder bed fusion Addit. Manuf.60 103218

[220] [220] Sisco K, Plotkowski A, Yang Y, Leonard D, Stump B, Nandwana P, Dehoff R R and Babu S S 2021 Microstructure and properties of additively manufactured Al-Ce-Mg alloys Sci. Rep.11 6953

[221] [221] Wu T, Plotkowski A, Shyam A and Dunand D C 2022 Microstructure and creep properties of cast near-eutectic Al–Ce–Ni alloys Mater. Sci. Eng. A 833 142551

[222] [222] Wu T, Poplawsky J D, Allard L F, Plotkowski A, Shyam A and Dunand D C 2023 Microstructure and strengthening of Al-6Ce-3Ni-0.7Fe (wt%) alloy manufactured by laser powder-bed fusion Addit. Manuf.78 103858

[223] [223] Wu T, Plotkowski A, Shyam A and Dunand D C 2023 Microstructure and mechanical properties of hypoeutectic Al–6Ce–3Ni-0.7Fe (wt.%) alloy Mater. Sci. Eng. A 875 145072

[224] [224] Michi R A, Simpson J J, Bahl S, Campbell Q, Brackman P, Plotkowski A, Dehoff R R, Haynes J A, Wang Q G and Shyam A 2023 Additively manufactured Al-Ce-Ni-Mn alloy with improved elevated-temperature fatigue resistance Addit. Manuf.66 103477

[225] [225] Plotkowski A, Sisco K, Bahl S, Shyam A, Yang Y, Allard L, Nandwana P, Rossy A M and Dehoff R R 2020 Microstructure and properties of a high temperature Al-Ce-Mn alloy produced by additive manufacturing Acta Mater.196 595–608

[226] [226] Czerwinski F 2021 Thermal stability of aluminum-nickel binary alloys containing the Al-Al3Ni eutectic Metall. Mater. Trans. A 52 4342–56

[227] [227] Suwanpreecha C, Pandee P, Patakham U and Limmaneevichitr C 2018 New generation of eutectic Al-Ni casting alloys for elevated temperature services Mater. Sci. Eng. A 709 46–54

[228] [228] Suwanpreecha C, Rakhmonov J U, Chankitmunkong S, Pandee P, Dunand D C and Limmaneevichitr C 2022 Ambient- and elevated temperature properties of Sc- and Zr-modified Al–6Ni alloys strengthened by Al3Ni microfibers and Al3(Sc, Zr) nanoprecipitates Mater. Sci. Eng. A 841 142963

[229] [229] Pandey P, Makineni S K, Gault B and Chattopadhyay K 2019 On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition Acta Mater.170 205–17

[230] [230] Boussinot G, Dring M, Hemes S, Stryzhyboroda O, Apel M and Schmidt M 2021 Laser powder bed fusion of eutectic Al–Ni alloys: experimental and phase-field studies Mater. Des.198 109299

[231] [231] Katgerman L 2011 Principles of solidification Mater. Today14 502

[232] [232] Qi X, Takata N, Suzuki A, Kobashi M and Kato M 2022 Controllable tensile performance of additively manufactured Al–Fe alloy Mater. Sci. Eng. A 855 143893

[233] [233] Wang W Y, Takata N, Suzuki A, Kobashi M and Kato M 2020 Formation of multiple intermetallic phases in a hypereutectic Al-Fe binary alloy additively manufactured by laser powder bed fusion Intermetallics125 106892

[234] [234] Wang W Y, Takata N, Suzuki A, Kobashi M and Kato M 2021 Processability and optimization of laser parameters for densification of hypereutectic Al-Fe binary alloy manufactured by laser powder bed fusion Crystals11 320

[235] [235] Wang W Y, Takata N, Suzuki A, Kobashi M and Kato M 2022 Microstructural variations in laser powder bed fused Al–15% Fe alloy at intermediate temperatures Materials15 4497

[236] [236] Wang W Y, Takata N, Suzuki A, Kobashi M and Kato M 2022 High-temperature strength sustained by nano-sized eutectic structure of Al–Fe alloy manufactured by laser powder bed fusion Mater. Sci. Eng. A 838 142782

[237] [237] Prez-Prado M T, Martin A, Shi D F, Milenkovic S and Cepeda-Jimnez C M 2022 An Al-5Fe-6Cr alloy with outstanding high temperature mechanical behavior by laser powder bed fusion Addit. Manuf.55 102828

[238] [238] de Araujo A P M, Kiminami C S, Uhlenwinkel V and Gargarella P 2023 High-temperature tensile properties of an aluminum quasicrystal-forming alloy manufactured by laser powder bed fusion Mater. Sci. Eng. A 886 145670

[239] [239] de Araujo A P M, Pauly S, Batalha R L, Coury F G, Kiminami C S, Uhlenwinkel V and Gargarella P 2021 Additive manufacturing of a quasicrystal-forming Al95Fe2Cr2Ti1 alloy with remarkable high-temperature strength and ductility Addit. Manuf.41 101960

[240] [240] Ding H, Xiao Y K, Bian Z Y, Wu Y, Yang H H, Wang H Z and Wang H W 2021 Design, microstructure and thermal stability of a novel heat-resistant Al-Fe-Ni alloy manufactured by selective laser melting J. Alloys Compd.885 160949

[241] [241] Wang W Y, Takata N, Suzuki A, Kobashi M and Kato M 2023 Design of Al–Fe–Mn alloy for both high-temperature strength and sufficient processability of laser powder bed fusion Addit. Manuf.68 103524

[242] [242] Galano M and Audebert F 2022 Novel Al based nanoquasicrystalline alloys Prog. Mater. Sci.123 100831

[243] [243] Carreo F, Prez-Prado M T, Gonzlez-Doncel G and Ruano O A 1998 Texture stability of a rapidly solidified dispersion strengthened Al-Fe-V-Si material Scr. Mater.38 1427–33

[244] [244] Zheng L J, Liu Y Y, Sun S B and Zhang H 2015 Selective laser melting of Al-8.5Fe-1.3V-1.7Si alloy: investigation on the resultant microstructure and hardness Chin. J. Aeronaut.28 564–9

[245] [245] Sun S B, Zheng L J, Liu Y Y, Liu J H and Zhang H 2015 Characterization of Al-Fe-V-Si heat-resistant aluminum alloy components fabricated by selective laser melting J. Mater. Res.30 1661–9

[246] [246] Sun S B, Zheng L J, Liu J H and Zhang H 2023 Microstructure, cracking behavior and control of Al-Fe-V-Si alloy produced by selective laser melting Rare Met.42 1353–62

[247] [247] Yu S J, Wang P, Li H C, Setchi R, Wu M W, Liu Z Y, Chen Z W, Waqar S and Zhang L C 2023 Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion Virtual Phys. Prototyp.18 e2155197

[248] [248] Zhou S Y, Su Y, Wang H, Enz J, Ebel T and Yan M 2020 Selective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: cracking elimination by co-incorporation of Si and TiB2Addit. Manuf.36 101458

[249] [249] Zhou L, Hyer H, Thapliyal S, Mishra R S, McWilliams B, Cho K and Sohn Y 2020 Process-dependent composition, microstructure, and printability of Al-Zn-Mg and Al-Zn-Mg-Sc-Zr alloys manufactured by laser powder bed fusion Metall. Mater. Trans. A 51 3215–27

[250] [250] Liu D H, Wu D J, Wang Y S, Chen Z, Ge C R, Zhao Q Y, Niu F Y and Ma G Y 2024 Enhanced high-temperature mechanical properties of laser-arc hybrid additive manufacturing of Al-Zn-Mg-Cu alloy via microstructure control J. Mater. Sci. Technol.169 220–34

[251] [251] Jia Q B, Zhuo Y H, Yan Y Q, Lu C Q, Chen Z Y, Cheng Y and Wang C Y 2024 Tensile creep mechanisms of Al-Mn-Sc alloy fabricated by additive manufacturing Addit. Manuf.79 103910

[252] [252] Kimura T, Ozaki T, Nakamoto T, Miki T, Murakami I, Tanaka A and Hashizume Y 2023 Combined factors for enhanced high-temperature strength of Al-Mn-Cr heat-resistant alloy fabricated using laser-based powder bed fusion Mater. Charact.196 112618

[253] [253] Bayoumy D, Schliephake D, Dietrich S, Wu X H, Zhu Y M and Huang A J 2021 Intensive processing optimization for achieving strong and ductile Al-Mn-Mg-Sc-Zr alloy produced by selective laser melting Mater. Des.198 109317

[254] [254] Feng S Y, Li Q L, Liu W, Shu G G and Wang X 2020 Microstructure and mechanical properties of Al-B4C composite at elevated temperature strengthened with in situ Al2O3 network Rare Met.39 671–9

[255] [255] Yan Y F, Kou S Q, Yang H Y, Shu S L, Qiu F, Jiang Q C and Zhang L C 2023 Ceramic particles reinforced copper matrix composites manufactured by advanced powder metallurgy: preparation, performance, and mechanisms Int. J. Extrem. Manuf.5 032006

[256] [256] Shao C W, Li H Y, Zhu Y K, Li P, Yu H Y, Zhang Z F, Gleiter H, McDonald A and Hogan J 2023 Nano-additive manufacturing of multilevel strengthened aluminum matrix composites Int. J. Extrem. Manuf.5 015102

[257] [257] Astfalck L C, Kelly G K, Li X P and Sercombe T B 2017 On the breakdown of SiC during the selective laser melting of aluminum matrix composites Adv. Eng. Mater.19 1600835

[258] [258] Chang F, Gu D D, Dai D H and Yuan P P 2015 Selective laser melting of in-situ Al4SiC4+SiC hybrid reinforced Al matrix composites: influence of starting SiC particle size Surf. Coat. Technol.272 15–24

[259] [259] Wan J, Geng H R, Chen B, Shen J H, Kondoh K and Li J S 2023 Evading ductility deterioration in aluminum matrix composites via intragranulation of nano-reinforcement by reactive selective laser melting Mater. Sci. Eng. A 863 144552

[260] [260] Li X W, Shi S, Han S, Hu X G, Zhu Q, Lu H X, Li W W, Shi Y S and Ding H 2020 Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting Addit. Manuf.34 101326

[261] [261] Liu X H, Liu Y Z, Zhou Z G and Zhan Q K 2022 Enhanced strength and ductility in Al-Zn-Mg-Cu alloys fabricated by laser powder bed fusion using a synergistic grain-refining strategy J. Mater. Sci. Technol.124 41–52

[262] [262] Yin P, Liu Y T, Liang Z H, Pan W, Shao S B and Zhang Y Z 2023 Microstructure, mechanical properties and fracture behavior of micron-sized TiB2/AlZnMgCu(Sc, Zr) composites fabricated by selective laser melting Materials16 2112

[263] [263] Ding H, Xiao Y K, Bian Z Y, Wu Y, Yang H H, Li Y, Chen Z, Wang H Z and Wang H W 2022 Effect of in-situ TiB2 particles on microstructure and mechanical properties of Al-Fe-Ni manufactured by selective laser melting Mater. Sci. Eng. A 845 143065

[264] [264] Biffi C A, Bassani P, Fiocchi J, Albu M and Tuissi A 2021 Selective laser melting of AlCu-TiB2 alloy using pulsed wave laser emission mode: processability, microstructure and mechanical properties Mater. Des.204 109628

[265] [265] Sun T T, Chen J, Wu Y, Wang M L, Fu Y N, Wang H Z and Wang H W 2022 Achieving excellent strength of the LPBF additively manufactured Al-Cu-Mg composite via in-situ mixing TiB2 and solution treatment Mater. Sci. Eng. A 850 143531

[266] [266] Mair P, Goettgens V S, Rainer T, Weinberger N, Letofsky-Papst I, Mitsche S and Leichtfried G 2021 Laser powder bed fusion of nano-CaB6 decorated 2024 aluminum alloy J. Alloys Compd.863 158714

[267] [267] Belelli F, Casati R, Riccio M, Rizzi A, Kayacan M Y and Vedani M 2021 Development of a novel high-temperature Al alloy for laser powder bed fusion Metals11 35

[268] [268] He P D, Kong H, Liu Q, Ferry M, Kruzic J J and Li X P 2021 Elevated temperature mechanical properties of TiCN reinforced AlSi10Mg fabricated by laser powder bed fusion additive manufacturing Mater. Sci. Eng. A 811 141025

[269] [269] Mondal B, Mukherjee T and DebRoy T 2022 Crack free metal printing using physics informed machine learning Acta Mater.226 117612

[270] [270] Park S, Kayani S H, Euh K, Seo E, Kim H, Park S, Yadav B N, Park S J, Sung H and Jung I D 2022 High strength aluminum alloys design via explainable artificial intelligence J. Alloys Compd.903 163828

[271] [271] Wei M, Tang Y, Zhang L J, Sun W H and Du Y 2015 Phase-field simulation of microstructure evolution in industrial A2214 alloy during solidification Metall. Mater. Trans. A 46 3182–91

[272] [272] Liu H Z Q, Hao K D, Xu L Y, Han Y D, Zhao L and Ren W J 2024 Effect of arc mode on laser-arc hybrid additive manufacturing of Al–Cu alloy: pore defects, microstructure and mechanical properties Mater. Sci. Eng. A 891 146022

[273] [273] Jiang M, Li B C, Chen X, Han T Y, Ma S C, Duan X Y, Du W H, Lei Z L and Chen Y B 2024 Enhanced surface finish and reduced porosity of TiC nanoparticles reinforced 2219 aluminum alloy deposit fabricated via oscillating laser-arc hybrid additive manufacturing J. Manuf. Process.120 414–25

[274] [274] Dai G Q, Xue M H, Guo Y H, Sun Z G, Chang H, Lu J Z, Li W Y, Panwisawas C and Alexandrov I V 2023 Gradient microstructure and strength-ductility synergy improvement of 2319 aluminum alloys by hybrid additive manufacturing J. Alloys Compd.968 171781