[1] [1] FENG H T, WANG Y L, LI C M, et al.. An automatic measuring method and system using a light curtain for the thread profile of a ballscrew［J］. Measurement Science and Technology, 2011, 22(8): 085106.

[2] [2] FAN D F, HU D J, XU J G, et al.. Wheel′s section theory analysis of large pitch ball screw nut ［J］. Journal of Shanghai Jiaotong University, 2009(5):816-820. (in Chinese)

[3] [3] CHEN S, ZHAO D B, LU Y H, et al.. A method for detecting alignment deviation on a thread-measuring instrument［J］. Measurement Science and Technology, 2013, 24(8): 085002.

[4] [4] CHEN M L. Vertical projection measuring method for male thread and its application analysis ［J］. Laser Technology, 2012,36(6) : 793-797. (in Chinese)

[5] [5] DING L L. The Design and Research of High-precision Stylus Contact Measuring Instrument of Screw Thread Parameters［D］. Nanjing: Nanjing University of Aeronautics and Astronautics,2011. (in Chinese)

[6] [6] RAO Z, HUANG K, MAO J, et al.. Screw thread parameter measurement system based on image processing method ［J］. SPIE, 2013,8911:891109.

[7] [7] YAO Y Y, WANG X, ZHAO L P. A high-precision optical fiber detection method for inner raceway surface of ball nut: CN104792276A ［P］.2015-07-22. (in Chinese)

[8] [8] WANG R, OU Y, FENG H T, et al.. Detection of raceway profile of ballscrew nut based on laser triangulation ［J］. Modular Machine Tool & Automatic Manufacturing Technique, 2018, 533(7):87-90,93. (in Chinese)

[9] [9] WANG SH F, ZHAO X, TONG SH F, et al.. Development of screw thread detector based on laser probing displacement technique［J］. Chinese Journal of Scientific Instrument, 2007, 28(4):755-759. (in Chinese)

[10] [10] L D F, DING ZH L, YUAN F. Measurement of inside screw curve surface by laser probe ［J］. Opt. Precision Eng., 2007, 15(2) : 186-191. (in Chinese)

[11] [11] ZHANG L Y, YI H M, LIU SH L. Linear calibration for on-machine measurement of laser probe pose［J］. Opt. Precision Eng., 2016, 24(4): 681-689. (in Chinese)

[12] [12] GB/T 17587.3-1998 Ball screws Part 3: Acceptance conditions and acceptance tests［S］. (in Chinese)

[13] [13] LI B, SUN B, CHEN L, et al.. Application of laser displacement sensor to free-form surface measurement ［J］. Opt. Precision Eng., 2015, 23(7): 1939-1947. (in Chinese)

[14] [14] SHIOU F J , LEE R T . Calculation of the unit normal vector using the cross-curve moving mask for measurement data obtained from a coordinate measuring machine ［J］. Journal of Physics: Conference Series, 2006, 48:122-127. (in Chinese)

[15] [15] CHENG M J, SHEN X J, XIAO J J, et al.. Three-dimensional calibration of fisheye camera based on laser scanner ［J］. Acta Optica Sinica, 2017(3):260-268. (in Chinese)

[16] [16] GAO Y, SHAO SH Y, FENG Q B. A novel method for automatically measuring wheel geometric parameters by laser scanning ［J］. Chinese Journal of Lasers, 2013, 40(7):176-181. (in Chinese)