[1] Zhang J C, Shi S H, Gong Y Q et al. Research progress of laser cladding technology[J]. Surface Technology, 49, 1-11(2020).

[2] Xiao L L, Ren Y, Gao Q H et al. Research on progress of laser cladding technology[J]. New Technology & New Process, 5-7(2021).

[3] Ding L, Hu S S, Quan X M et al. Effect of VN alloy addition on the microstructure and wear resistance of Co-based alloy coatings[J]. Journal of Alloys and Compounds, 659, 8-14(2016).

[4] Paydas H, Mertens A, Carrus R et al. Laser cladding as repair technology for Ti-6Al-4V alloy: influence of building strategy on microstructure and hardness[J]. Materials & Design, 85, 497-510(2015).

[5] Chen P Q. Analysis of the effect of Fe-WC cermet gradient coating on the surface microstructure and properties of alloy steel[D](2021).

[6] Liu X B, Bi J Z, Meng Z Y et al. Tribological behaviors of high-hardness Co-based amorphous coatings fabricated by laser cladding[J]. Tribology International, 162, 107142(2021).

[7] Sui Y Y, Yang F, Qin G L et al. Microstructure and wear resistance of laser-cladded Ni-based composite coatings on downhole tools[J]. Journal of Materials Processing Technology, 252, 217-224(2018).

[8] Qiu H X, Yu W B, Song J L et al. Numerical simulation of laser cladding 316L/H13+20%WC composite coating on H13 steel surface[J]. Laser & Optoelectronics Progress, 59, 0314002(2022).

[9] Zhu L D, Xue P S, Lan Q et al. Recent research and development status of laser cladding: a review[J]. Optics & Laser Technology, 138, 106915(2021).

[10] Tamanna N, Crouch R, Naher S. Progress in numerical simulation of the laser cladding process[J]. Optics and Lasers in Engineering, 122, 151-163(2019).

[11] Li Y, Li P. Research progress on erosion wear resistant nickel-based composite coatings prepared by laser cladding[J]. Materials Reports, 35, 15162-15168, 15174(2021).

[12] Zhang Y J, Yang J H, Xu L P. Application of laser cladding technology in mechanical parts with surface failure[J]. Plating and Finishing, 43, 39-43(2021).

[13] Erfanmanesh M, Shoja-Razavi R, Abdollah-Pour H et al. Friction and wear behavior of laser cladded WC-Co and Ni/WC-Co deposits at high temperature[J]. International Journal of Refractory Metals and Hard Materials, 81, 137-148(2019).

[14] Thawari N, Gullipalli C, Chandak A et al. Influence of laser cladding parameters on distortion, thermal history and melt pool behaviour in multi-layer deposition of stellite 6: in-situ measurement[J]. Journal of Alloys and Compounds, 860, 157894(2021).

[15] Zhang C C, Shi Y, Wang H X. Effect of laser power on properties of Co-based gradient wear-resistant coatings[J]. Laser Technology, 42, 494-499(2018).

[16] Hu M. Study on the process and mechanism of WC-Co wear-resistant coating on the surface of steel by laser cladding[D](2020).

[17] Wang H, Wu M P, Lu P P et al. Effect of laser power on the mechanical properties of the cobalt-based/GO composite coatings[J]. Laser & Optoelectronics Progress, 57, 091405(2020).

[18] Bartkowski D, Kinal G. Microstructure and wear resistance of stellite-6/WC MMC coatings produced by laser cladding using Yb∶YAG disk laser[J]. International Journal of Refractory Metals and Hard Materials, 58, 157-164(2016).

[19] Ye H, Yu W X, Lei L P et al. Process optimization of Co-based coating on H13 steel by laser cladding and its microstructure and properties[J]. Heat Treatment of Metals, 41, 117-121(2016).

[20] Wang T, Yao Y C, Wang N et al. Microstructure and wear resistance of Co-based alloy coating fabricated by laser cladding[J]. Heat Treatment of Metals, 42, 84-89(2017).

[21] He S S. Microstructure and properties of Co-based alloy composite coating on stainless steel surface by laser cladding[D](2019).

[22] Cui G, Han B, Zhang M K. Study on the process of laser cladding Co-based alloy coating prepared on the surface of stainless steel[J]. Applied Laser, 35, 397-401(2015).

[23] Alafate M, Wurikaixi A, Jin J T. A review of the application of nickel-base alloy in laser cladding remanufacturing[J]. Machinery Design & Manufacture, 263-265(2017).

[24] Li G. Microstructure and properties of Co-based alloy laser cladding layer reinforcement by TiC[D](2016).

[25] Falqueto L E, Butkus D J, De Mello J D B et al. Sliding wear of cobalt-based alloys used in rolling seamless tubes[J]. Wear, 376/377, 1739-1746(2017).

[26] Zhang M. Optimization of laser cladding process parameters of cobalt-based alloy and study on its properties[D](2021).

[27] Guo H M, Wang Q, Wang W J et al. Investigation on wear and damage performance of laser cladding Co-based alloy on single wheel or rail material[J]. Wear, 328/329, 329-337(2015).

[28] Cui L J, Zhang M, Cao Y L et al. Microstructure and properties of cobalt alloy laser cladding layer for pump valve[J]. Surface Technology, 48, 333-340(2019).

[29] Ye H, Lei L P, Yu W X et al. Microstructure and thermal fatigue resistance of Co-based alloy coating on H13 steel by laser cladding[J]. High Power Laser and Particle Beams, 29, 140-144(2017).

[30] Li Z Y, Yan H, Zhang P L et al. Improving surface resistance to wear and corrosion of nickel‑aluminum bronze by laser-clad TaC/Co-based alloy composite coatings[J]. Surface and Coatings Technology, 405, 126592(2021).

[31] Quan X M, Ding L. Microstructure and property of in-situ TiC reinforced Co-based composite coatings by laser cladding[J]. Science of Advanced Materials, 11, 1798-1805(2019).

[32] Tong W H, Zhao Z L, Zhang X Y et al. Microstructure and properties of TiC/Co-based alloy by laser cladding on the surface of nodular graphite cast iron[J]. Acta Metallurgica Sinica, 53, 472-478(2017).

[33] Sun N, Fang Y, Zhang J Q et al. Effect of WC-12Co addition on microstructure and wear resistance of Inconel 625 matrix composites prepared by laser cladding[J]. Chinese Journal of Lasers, 48, 0602106(2021).

[34] Hu D W, Liu Y, Chen H et al. Microstructure and properties of laser cladding Ni-based WC coating on Q960E steel[J]. Chinese Journal of Lasers, 48, 060212(2021).

[35] Xu M M. Microstructure and properties of laser cladding WC-Co composite coatings on titanium and titanium alloys[D](2020).

[36] Pan L, Gao W Z, Pan C X et al. Influence of WC on microstructure, compositions of micro-region and microhardness of laser cladding cobalt-based alloy layer[J]. Transactions of Materials and Heat Treatment, 31, 129-135(2010).

[37] He B, Zhuang J L, Lan J J et al. Microstructure and wear-resistant properties of tungsten carbide/cobalt-based alloys composite coating by laser cladding[J]. Applied Laser, 37, 314-318(2017).

[38] Li C Y, Kou S Z, Zhao Y C et al. Microstructure and mechanical property of laser cladding Co-WC composite coatings on titanium alloy surface[J]. Journal of Functional Materials, 46, 7025-7029(2015).

[39] Bartkowski D, Młynarczak A, Piasecki A et al. Microstructure, microhardness and corrosion resistance of Stellite-6 coatings reinforced with WC particles using laser cladding[J]. Optics & Laser Technology, 68, 191-201(2015).

[40] Gong Y P, Lu W Y, Yuan X M. Microstructure and properties of TiB2 reinforced Co-based alloy coating by laser cladding[J]. Laser Technology, 32, 122-124(2008).

[41] Ma H B, Zhang W P. Microstructure and properties of Co-based alloy laser clad layer on titanium alloy surface[J]. Rare Metal Materials and Engineering, 39, 2189-2192(2010).

[42] Weng F, Yu H J, Liu J L et al. Microstructure and wear property of the Ti5Si3/TiC reinforced Co-based coatings fabricated by laser cladding on Ti-6Al-4V[J]. Optics & Laser Technology, 92, 156-162(2017).

[43] Tong W H, Liu Y K, Zhao C X et al. The effects of laser cladding parameters on the microstructure and properties of cladding layer of(TiC + B4C)/Co-based alloy on the surface of ductile iron[J]. Journal of Shenyang Aerospace University, 37, 46-54(2020).

[44] Zhang Y Z, Xu P Q, Liu C G et al. The influence of carbides on the microstructure, grain growth, and oxidation resistance of nanostructured carbides-strengthened cobalt-based multi-track laser-cladding layers[J]. Applied Surface Science, 469, 495-504(2019).

[45] Liu S S, Wang Y H, Zhang W P. Microstructure and wear resistance of laser clad cobalt-based composite coating on TA15 surface[J]. Rare Metal Materials and Engineering, 43, 1041-1046(2014).

[46] Zhang C H, Wu S Q, Liu K et al. Effect of rare earth on microstructure and properties of Co-based alloy by laser cladding[J]. Journal of Shenyang University of Technology, 40, 492-497(2018).

[47] Shi C, Lei J B, Zhou S F et al. Microstructure and mechanical properties of carbon fibers strengthened Ni-based coatings by laser cladding: the effect of carbon fiber contents[J]. Journal of Alloys and Compounds, 744, 146-155(2018).

[48] Lu D H, Liu S S, Zhang X Y et al. Effect of Y2O3 on microstructural characteristics and wear resistance of cobalt-based composite coatings produced on TA15 titanium alloy surface by laser cladding[J]. Surface and Interface Analysis, 47, 239-244(2015).

[49] Weng F, Yu H J, Chen C Z et al. Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti-6Al-4V alloy[J]. Journal of Alloys and Compounds, 650, 178-184(2015).

[50] Yang S L, You J Q, Zhang D M et al. Microstructure and properties of Co-based alloy laser cladding on Ni-based alloy[J]. Heat Treatment of Metals, 41, 130-133(2016).

[51] Li Z Y, Zhao W Y, Gu W Q et al. Effect of Ti on microstructure and properties of Co-based alloy coating by laser cladding[J]. Chinese Journal of Lasers, 37, 2086-2090(2010).

[52] Farnia A, Malek Ghaini F, Rao J C et al. Effect of Ta on the microstructure and hardness of Stellite 6 coating deposited by low power pulse laser treatments[J]. Surface and Coatings Technology, 213, 278-284(2012).

[53] Voevodin A A, Muratore C, Aouadi S M. Hard coatings with high temperature adaptive lubrication and contact thermal management: review[J]. Surface and Coatings Technology, 257, 247-265(2014).

[54] Wang Z W, Zhuang S G, Liu H Q et al. Research progress and development trend of self-lubricating composite coatings by laser cladding[J]. Surface Technology, 47, 104-112(2018).

[55] Meng X J, Liu H Q, Liu X B. The solid lubricating materials in the application of laser cladding[J]. Applied Laser, 40, 539-546(2020).

[56] Yan H, Zhang J, Zhang P L et al. Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold[J]. Surface and Coatings Technology, 232, 362-369(2013).

[57] Li X, Zhang C H, Zhang S et al. Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology[J]. Optics & Laser Technology, 114, 209-215(2019).

[58] Wang G, Liu X B, Liu Y F et al. Microstructure and tribological properties of Co-Ti3SiC2 self-lubricating composite coatings on 304 stainless steel by laser cladding[J]. Journal of Materials Engineering, 49, 105-115(2021).

[59] Cui G, Han B, Zhao J B et al. Comparative study on tribological properties of the sulfurizing layers on Fe, Ni and Co based laser cladding coatings[J]. Tribology International, 134, 36-49(2019).

[60] Ramiro P, Alberdi A, Ortiz M et al. Characteristics of Fe-, Ni- and Co-based Powder coatings fabricated by laser metal deposition without preheating the base material[J]. Procedia CIRP, 68, 381-386(2018).

[61] Quan X M, Ding L, Liu R F et al. Effect of aging treatment on microstructure and wear resistance of VN alloy/Co-based alloy laser coating[J]. Foundry, 64, 269-272, 275(2015).

[62] Xu J L, Zhou J Z, Tan W S et al. Thermal corrosion resistance of Co-based alloy coatings by laser cladding assisted by electromagnetic stirring[J]. Acta Optica Sinica, 39, 0114002(2019).

[63] Xu J L, Zhou J Z, Tan W S et al. High-temperature oxidation resistance of Co-based alloy coatings by ultrasonic vibration assisted laser cladding[J]. Chinese Journal of Lasers, 46, 0102006(2019).

[64] Qi K, Yang Y, Sun R et al. Effect of magnetic field on crack control of Co-based alloy laser cladding[J]. Optics & Laser Technology, 141, 107129(2021).