[1] Li Z H, Shen J B, Li H Y et al. Effect of nano-TiC modification on selective laser melting of copper[J]. Chinese Journal of Lasers, 48, 0315001(2021).

[2] Tian J, Wei Q S, Zhu W Z et al. Selective laser melting process and mechanical properties of Cu-Al-Ni-Ti alloy[J]. Chinese Journal of Lasers, 46, 0302001(2019).

[3] Teng B R, Li Z H, Li H Y et al. Research progress on preparation of particle reinforced metal matrix composites by selecitve laser melting[J]. Materials Reports, 36, 20040170(2022).

[4] Gu D D, Hagedorn Y C, Meiners W et al. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium[J]. Acta Materialia, 60, 3849-3860(2012).

[5] Das M, Balla V K, Basu D et al. Laser processing of SiC-particle-reinforced coating on titanium[J]. Scripta Materialia, 63, 438-441(2010).

[6] Thijs L, Verhaeghe F, Craeghs T et al. A study of the microstructural evolution during selective laser melting of Ti-6Al-4V[J]. Acta Materialia, 58, 3303-3312(2010).

[7] Simchi A, Pohl H. Effects of laser sintering processing parameters on the microstructure and densification of iron powder[J]. Materials Science and Engineering: A, 359, 119-128(2003).

[8] Read N, Wang W, Essa K et al. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development[J]. Materials & Design (1980-2015), 65, 417-424(2015).

[9] Giovagnoli M, Silvi G, Merlin M et al. Optimisation of process parameters for an additively manufactured AlSi10Mg alloy: limitations of the energy density-based approach on porosity and mechanical properties estimation[J]. Materials Science and Engineering: A, 802, 140613(2021).

[10] Tonelli L, Fortunato A, Ceschini L. CoCr alloy processed by selective laser melting (SLM): effect of laser energy density on microstructure, surface morphology, and hardness[J]. Journal of Manufacturing Processes, 52, 106-119(2020).

[11] Bosio F, Aversa A, Lorusso M et al. A time-saving and cost-effective method to process alloys by laser powder bed fusion[J]. Materials & Design, 181, 107949(2019).

[12] Guo Q L, Zhao C, Qu M L et al. In-situ characterization and quantification of melt pool variation under constant input energy density in laser powder bed fusion additive manufacturing process[J]. Additive Manufacturing, 28, 600-609(2019).

[13] Attar H, Calin M, Zhang L C et al. Manufacture by selective laser melting and mechanical behavior of commercially pure titanium[J]. Materials Science and Engineering: A, 593, 170-177(2014).

[14] Bertoli U S, Wolfer A J, Matthews M J et al. On the limitations of volumetric energy density as a design parameter for selective laser melting[J]. Materials & Design, 113, 331-340(2017).

[15] Luo X L, Liu M H, Li Z H et al. Effect of different heat-source models on calculated temperature field of selective laser melted 18Ni300[J]. Chinese Journal of Lasers, 48, 1402005(2021).