Researching | Application of Lead Acetate Additive for Printable Perovskite Solar Cell

Journal of Inorganic Materials, Volume. 37, Issue 2, 197(2022)

Application of Lead Acetate Additive for Printable Perovskite Solar Cell

Yue MING1...2, Yue HU1, Anyi MEI1, Yaoguang RONG1 and Hongwei HAN1 |Show fewer author(s)

Author Affiliations

¹1. Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074, China

²2. Shenzhen Polytechnic, Shengzhen 518055, China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (7)

References (33)

Paper Information

References(33)

[1] Y RONG, Y HU, A MEI et al. Challenges for commercializing perovskite solar cells. Science, 361, eaat8235(2018).

[2] P CORREA-BAENA J, M SALIBA, T BUONASSISI et al. Promises and challenges of perovskite solar cells. Science, 358, 739-744(2017).

[3] A KOJIMA, K TESHIMA, Y SHIRAI et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc., 131, 6050-6051(2009).

[4] S KIM H, R LEE C, H IM J et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep., 2, 591(2012).

[5] P FU, S HU, J TANG et al. Material exploration via designing spatial arrangement of octahedral units: a case study of lead halide perovskites. Front. Optoelectron., 14, 252-259(2021).

[6] D LIU, L WANG, Q CUI et al. Planar metasurfaces enable high-efficiency colored perovskite solar cells. Advanced Science, 5, 1800836(2018).

[7] O AMIRI, E REZAEE A, H TEYMOURINIA et al. New strategy to overcome the instability that could speed up the commercialization of perovskite solar cells. Adv. Mater. Interfaces, 6, 1900134(2019).

[8] Y ZHANG, Z LIU, C JI et al. Low-temperature oxide/metal/oxide multilayer films as highly transparent conductive electrodes for optoelectronic devices. ACS Applied Energy Materials, 4, 6553-6561(2021).

[9] W LIU W, L HU Z, L WANG et al. Passiviation of L-3-(4-pyridyl)-alanine on interfacial defects of perovskite solar cell. Journal of Inorganic Materials, 36, 629-636(2021).

[10] D YANG D, M LI X, F MENG C et al. Research progress on the stability of CsPbX₃ nanocrystals. Journal of Inorganic Materials, 35, 1088-1098(2020).

[11] G MENG, Q YE Y, M FAN L et al. Recent progress of halide perovskite radiation detector materials. Journal of Inorganic Materials, 35, 1203-1213(2020).

[12] E EPERON G, D STRANKS S, C MENELAOU et al. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells. Energy Environ. Sci., 7, 982-988(2014).

[13] H MIN, M KIM, U LEE S et al. Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide. Science, 366, 749(2019).

[14] J JEONG, M KIM, J SEO et al. Pseudo-halide anion engineering for α-FAPbI₃ perovskite solar cells. Nature, 592, 381-385(2021).

[15] X WANG Y, Y GAO P, Y FAN X et al. Effect of SnO₂ annealing temperature on the performance of perovskite solar cells. Journal of Inorganic Materials, 36, 168-174(2021).

[16] J BURSCHKA, N PELLET, J MOON S et al. Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature, 499, 316-319(2013).

[17] H ZHOU, Q CHEN, G LI et al. Interface engineering of highly efficient perovskite solar cells. Science, 345, 542-546(2014).

[18] T LIU, K CHEN, Q HU et al. Inverted perovskite solar cells: progresses and perspectives. Adv. Energy Mater., 6, 1600457(2016).

[19] Z KU, Y RONG, M XU et al. Full printable processed mesoscopic CH₃NH₃PbI₃/TiO₂ heterojunction solar cells with carbon counter electrode. Sci. Rep., 3, 3132(2013).

[20] A MEI, X LI, L LIU et al. A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability. Science, 345, 295-298(2014).

[21] Y RONG, X HOU, Y HU et al. Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells. Nat. Commun., 8, 14555(2017).

[22] X HOU, M XU, C TONG et al. High performance printable perovskite solar cells based on Cs_0.1FA_0.9PbI₃ in mesoporous scaffolds. J. Power Sources, 415, 105-111(2019).

[23] J DU, S LIU, J WU et al. Crystallization control of methylammonium- free perovskite in two-step deposited printable triple-mesoscopic solar cells. Solar RRL, 4, 2000455(2020).

[24] Q WANG, W ZHANG, Z ZHANG et al. Crystallization control of ternary-cation perovskite absorber in triple-mesoscopic layer for efficient solar cells. Adv. Energy Mater., 10, 1903092(2020).

[25] X HOU, Y HU, H LIU et al. Effect of guanidinium on mesoscopic perovskite solar cells. J. Mater. Chem. A, 5, 73-78(2017).

[26] Y GUAN, M XU, W ZHANG et al. In situ transfer of CH₃NH₃PbI₃ single crystals in mesoporous scaffolds for efficient perovskite solar cells. Chem. Sci., 11, 474-481(2020).

[27] J JEON N, H NOH J, C KIM Y et al. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. Nat. Mater., 13, 897-903(2014).

[28] M LEE M, J TEUSCHER, T MIYASAKA et al. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science, 338, 643-647(2012).

[29] Q DONG, Y YUAN, Y SHAO et al. Abnormal crystal growth in CH₃NH₃PbI₃-_xCl_x using a multi-cycle solution coating process. Energy Environ. Sci., 8, 2464-2470(2015).

[30] W ZHANG, M SALIBA, T MOORE D et al. Ultrasmooth organic- inorganic perovskite thin-film formation and crystallization for efficient planar heterojunction solar cells. Nat. Commun, 6, 6142(2015).

[31] Q CHEN, H ZHOU, B SONG T et al. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells. Nano Lett., 14, 4158-4163(2014).

[32] C KIM Y, J JEON N, H NOH J et al. Beneficial effects of PbI₂ incorporated in organo-lead halide perovskite solar cells. Adv. Energy Mater., 6, 1502104(2016).

[33] Z WAN, M XU, Z FU et al. Screen printing process control for coating high throughput titanium dioxide films toward printable mesoscopic perovskite solar cells. Front. Optoelectron., 12, 344-351(2019).

Tools

Get Citation

Copy Citation Text

Yue MING, Yue HU, Anyi MEI, Yaoguang RONG, Hongwei HAN. Application of Lead Acetate Additive for Printable Perovskite Solar Cell[J]. Journal of Inorganic Materials, 2022, 37(2): 197

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category:

Received: Aug. 30, 2021

Accepted: --

Published Online: Nov. 14, 2022

The Author Email:

DOI:10.15541/jim20210538

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology