Optics and Precision Engineering, Volume. 27, Issue 2, 440(2019)

Research on extraction algorithm of projected circular centers of marked points on the planar calibration targets

XIE Ze-xiao* and WANG Xiao-min
Author Affiliations
  • [in Chinese]
  • show less
    References(22)

    [1] [1] LEI J ZH, ZENG L B, YE N. Research on industrial robot alignment technique with monocular vision [J]. Opt. Precision Eng., 2018, 26(3): 217-225. (in Chinese)

    [3] [3] FU S Y, WU L SH, CHEN H W, et al.. Camera calibration based on multiple distortion factors [J]. Chinese Journal of Scientific Instrument, 2018, 39(2): 248-256. (in Chinese)

    [5] [5] QU X J, ZHANG L, ZHANG L Y. Camera calibration and 3D reconstruction based on a new imaging model [J]. Chinese Journal of Scientific Instrument, 2011, 32(8): 1830-1836. (in Chinese)

    [6] [6] ZHAO Z, LIU Y. Applications of projected circle centers in camera calibration [J]. Machine Vision and Applications, 2008, 21(3): 301-307.

    [7] [7] ZHANG X, CHENG D Q, LI W. High precision calibration of vision measurement system in large FOV based on virtual 3D target [J]. Opt. Precision Eng., 2018, 25(4): 359-367. (in Chinese)

    [8] [8] GU B. Research on Mobile Three-dimentional Scanning Technology Based on Marked Points [D]. Qingdao: Ocean University of China, 2013. (in Chinese)

    [9] [9] XIE Z X, GAO X, CUI J. Extraction algorithm of circular targets used for mobile three-dimensional measurement [J]. Chinese Journal of Lasers, 2013, 40(12): 160-165. (in Chinese)

    [10] [10] GUO Y B, YAO Y, DI X G. Subpixel location algorithm for circle target center based on spatial moment [J]. Journal of Jilin University (Engineering and Technology Edition), 2009, 39(1): 160-162. (in Chinese)

    [11] [11] WEI ZH ZH, ZHANG G J. A distortion error model of the perspective projection of ellipse center and its simulation [J]. Chinese Journal of Scientific Instrument, 2003, 24(2): 160-164. (in Chinese)

    [12] [12] XING D K, DA F P, ZHANG H. Research and application of locating of circular target with high accuracy [J]. Chinese Journal of Scientific Instrument, 2009, 30(12): 2593-2598. (in Chinese)

    [13] [13] ZHANG H, DA F P, LI Q. Self-calibration using two same circles [J]. Chinese Journal of Scientific Instrument, 2010, 31(3): 618-624. (in Chinese)

    [14] [14] LI ZH L, LIU M, SUN Y. Research on calculation method for the projection of circular target center in photogrammetry [J]. Chinese Journal of Scientific Instrument, 2011, 32(10): 2235-2241. (in Chinese)

    [15] [15] CHEN Q, WU H, Wada T. Camera calibration with two arbitrary coplanar circles[C]// Proc. European Conf. Computer Vision. Springer Berlin Heidelberg, 2004: 521-532.

    [16] [16] WU F CH. Mathematical Methods in Computer Vision [M]. Beijing: Science Press, 2008: 8-11. (in Chinese)

    [17] [17] KIM J S, GURDJOS P, KWEON I S. Geometric and algebraic constraints of projected concentric circles and their applications to camera calibration [J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 2005, 27(4): 637-642.

    [18] [18] SEMPLEJ G, KNEEBONEG T. Algebraic Projective Geometry [M]. Oxford: Clarendon Press, 1998.

    [19] [19] HARTLEY R, ZISSERMAN A. Multiple View Geometry in Computer Vision [M]. Cambridge University Press, 2003.

    [20] [20] GAO SH Y, ZHAO M Y, ZHANG L, et al.. Improved algorithm about subpixel edge detection of image based on zernike orthogonal moments [J]. Journal of automation, 2008, 34(9): 1163-1168. (in Chinese)

    [21] [21] XIE Z X, LU W J, WANG X M, et al.. Analysis of pose selection on binocular stereo calibration [J]. Chinese Journal of Lasers, 2015, 42(2): 237-244. (in Chinese)

    [22] [22] WANG X M. Research on Structured Light Scanning Technology Based on the Known Marked Points [D]. Qingdao: Ocean University of China, 2014. (in Chinese)

    CLP Journals

    [1] Xu Zuodong, Dong Yueqing, Yang Xiaoyong. Automatic Calibration Design of Machine Tool Based on Arc Detection of Laser Focusing Image[J]. APPLIED LASER, 2022, 42(6): 108

    Tools

    Get Citation

    Copy Citation Text

    XIE Ze-xiao, WANG Xiao-min. Research on extraction algorithm of projected circular centers of marked points on the planar calibration targets[J]. Optics and Precision Engineering, 2019, 27(2): 440

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Jun. 22, 2018

    Accepted: --

    Published Online: Apr. 2, 2019

    The Author Email: Ze-xiao XIE (xiezexiao@ouc.edu.cn)

    DOI:10.3788/ope.20192702.0440

    Topics