[1] [1] HE Z, SHEN A, GUO Y, et al. Cement-based materials modified with superabsorbent polymers: A review［J］. Constr Build Mater, 2019, 225(20): 569-590.

[2] [2] MOUSA M I, MAHDY M G, ABDEL-REHEEM A H, et al. Mechanical properties of self-curing concrete (SCUC)［J］. HBRC J, 2015, 11(3): 311-320.

[3] [3] YANG J, FAN J, KONG B, et al. Theory and application of new automated concrete curing system［J］. J Build Eng, 2018, 17: 125-134.

[4] [4] BENTZ D P, WEISS W J. Internal curing: a 2010 state-of-the-art review［M］. Gaithersburg: US Department of Commerce, National Institute of Standards and Technology, 2011: 3.

[5] [5] CUSSON D, LOUNIS Z, DAIGLE L. Benefits of internal curing on service life and life-cycle cost of high-performance concrete bridge decks - A case study［J］. Cem Concr Compos, 2010, 32(5): 339-350.

[6] [6] SHAO K, DU Y, ZHOU F. Effect of bio-based internal curing agent on the performance of high-performance mortar［J］. J Build Eng, 2022, 49: 104092.

[7] [7] BEUSHAUSEN H, GILLMER M. The use of superabsorbent polymers to reduce cracking of bonded mortar overlays［J］. Cem Concr Compos, 2014, 52: 1-8.

[8] [8] LIU K, YU R, SHUI Z, et al. Effects of pumice-based porous material on hydration characteristics and persistent shrinkage of ultra-high performance concrete (UHPC)［J］. Materials, 2019, 12(11): 1-22.

[11] [11] BALAPOUR M, ZHAO W, GARBOCZI E J, et al. Potential use of lightweight aggregate (LWA) produced from bottom coal ash for internal curing of concrete systems［J］. Cem Concr Compos, 2020, 105: 103428.

[12] [12] GHOURCHIAN S, WYRZYKOWSKI M, LURA P, et al. An investigation on the use of zeolite aggregates for internal curing of concrete［J］. Constr Build Mater, 2013, 40(3): 135-144.

[13] [13] CASTRO J, KEISER L, GOLIAS M, et al. Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures［J］. Cem Concr Compos, 2011, 33(10): 1001-1008.

[14] [14] ZHUANG Y, ZHENG D, NG Z, et al. Effect of lightweight aggregate type on early-age autogenous shrinkage of concrete［J］. Constr Build Mater, 2016, 120: 373-381.

[15] [15] AKCAY B, TASDEMIR M A. Optimisation of using lightweight aggregates in mitigating autogenous deformation of concrete［J］. Constr Build Mater, 2009, 23(1): 353-363.

[16] [16] CHIA K S, ZHANG M. Water permeability and chloride penetrability of high-strength lightweight aggregate concrete［J］. Cem Concr Res, 2002, 32(4): 639-645.

[17] [17] HOSSAIN K M A, AHMED S, LACHEMI M. Lightweight concrete incorporating pumice based blended cement and aggregate: Mechanical and durability characteristics［J］. Constr Build Mater, 2011, 25(3): 1186-1195.

[18] [18] JENSEN O M. Water-entrained cement-based materials.I. Principles and theoretical background［J］. Cem Concr Res, 2001, 31(4): 647-654.

[22] [22] SCHRFL C, ERK K A, SIRIWATWECHAKUL W, et al. Recent progress in superabsorbent polymers for concrete［J］. Cem Concr Res, 2022, 151: 106648.

[25] [25] DE MEYST L, MANNEKENS E, VAN TITTELBOOM K, et al. The influence of superabsorbent polymers (SAPs) on autogenous shrinkage in cement paste, mortar and concrete［J］. Constr Build Mater, 2021, 286(1): 122948.

[27] [27] ZHU Q, BARNEY C W, ERK K A. Effect of ionic crosslinking on the swelling and mechanical response of model superabsorbent polymer hydrogels for internally cured concrete［J］. Mater Struct, 2015, 48(7): 2261-2276.

[28] [28] ESTEVES L P, JENSEN O M. Absorbency of superabsorbent polymers in cementitious environments［C］//Materials Research Society Symposium on Concrete with Smart Additives and Supplementary Cementitious Materials, Cancun, 2012: 1-8.

[29] [29] SIRIWATWECHAKUL W, SIRAMANONT J, VICHIT-VADAKAN W. Behavior of superabsorbent polymers in calcium- and sodium-rich solutions［J］. J Mater Civ Eng, 2012, 24(8): 976-980.

[30] [30] LEE H X D, WONG H S, BUENFELD N R. Effect of alkalinity and calcium concentration of pore solution on the swelling and ionic exchange of superabsorbent polymers in cement paste［J］. Cem Concr Compos, 2018, 88: 150-164.

[31] [31] FARZANIAN K, PIMENTA TEIXEIRA K, PERDIGO ROCHA I, et al. The mechanical strength, degree of hydration, and electrical resistivity of cement pastes modified with superabsorbent polymers［J］. Constr Build Mater, 2016, 109: 156-165.

[32] [32] ZHONG P, HU Z, GRIFFA M, et al. Mechanisms of internal curing water release from retentive and non-retentive superabsorbent polymers in cement paste［J］. Cem Concr Res, 2021, 147: 106494.

[33] [33] LI M, WANG Y, WANG W, et al. Quantitative characterisation of absorption capacity and dosage of SAP in cement paste［J］. Adv Cem Res, 2016, 28(8): 518-528.

[34] [34] ESTEVES L P. On the absorption kinetics of Superabsorbent Polymers［C］//International RILEM Conference on Use of Superabsorbent Polymers and Other New Additives in Concrete, Technical University of Denmark, Lyngby, Denmark, 2010.

[35] [35] LURA P, DURAND F, LOUKILI A, et al. Compressive strength of cement pastes and mortars with superabsorbent polymers［C］ //Proceedings of the International RILEM Conference on Volume Changes of Hardening Concrete: Testing and Mitigation. Lyngby, Denmark: Rilem Publications SARL, 2006.

[36] [36] SNOECK D, PEL L, De BELIE N. The water kinetics of superabsorbent polymers during cement hydration and internal curing visualized and studied by NMR［J］. Sci Rep-Uk, 2017, 7(1): 1-14.

[37] [37] YANG J, SUN Z, ZHAO Y, et al. The water absorption-release of superabsorbent polymers in fresh cement paste: An NMR study［J］. J Adv Concr Technol, 2020, 18(3): 139-145.

[38] [38] LIU J, MA X, SHI C, et al. Internal curing of blended cement pastes with ultra‐low water‐to‐cement ratio: Absorption/desorption kinetics of superabsorbent polymer［J］. J Am Ceram Soc, 2021, 104(7): 3603-3618.

[39] [39] CHIDIAC S E, MIHALJEVIC S N, KRACHKOVSKIY S A, et al. Efficiency measure of SAP as internal curing for cement using NMR & MRI［J］. Constr Build Mater, 2021, 278(5): 122365.

[40] [40] NESTLE N, KHN A, FRIEDEMANN K, et al. Water balance and pore structure development in cementitious materials in internal curing with modified superabsorbent polymer studied by NMR［J］. Micropor Mesopor Mater, 2009, 125(1-2): 51-57.

[41] [41] SCHROEFL C, MECHTCHERINE V, VONTOBEL P, et al. Sorption kinetics of superabsorbent polymers (SAPs) in fresh Portland cement-based pastes visualized and quantified by neutron radiography and correlated to the progress of cement hydration［J］. Cem Concr Res, 2015, 75: 1-13.

[43] [43] ZHAO S, JENSEN O M, HASHOLT M T, et al. Absorption capacity of superabsorbent polymer in cement pastes: a robustness test［J］. Mater Struct, 2021, 54(46): 1-15.

[44] [44] ZHAO S, JENSEN O M, HASHOLT M T. Measuring absorption of superabsorbent polymers in cementitious environments［J］. Mater Struct, 2020, 53(11): 1-16.

[45] [45] YANG J, WANG F, LIU Z, et al. Early-state water migration characteristics of superabsorbent polymers in cement pastes［J］. Cem Concr Res, 2019, 118: 25-37.

[46] [46] JUSTS J, WYRZYKOWSKI M, WINNEFELD F, et al. Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio - A calorimetry study［J］. J Therm Anal Calorim, 2014, 115(1): 425-432.

[47] [47] ZHANG G, WANG Y, HE R, et al. Effects of super absorbent polymer on the early hydration of Portland cement highlighted by thermal analysis［J］. J Therm Anal Calorim, 2017, 129(1): 45-52.

[48] [48] KONG X, ZHANG Z, LU Z. Effect of pre-soaked superabsorbent polymer on shrinkage of high-strength concrete［J］. Mater Struct, 2015, 48(9): 2741-2758.

[51] [51] LURA P, YE G, CNUDDE V, et al. Preliminary results about 3D distribution of superabsorbent polymers in mortars［C］//International conference on microstructure related durability of cementitious composites, Nanjing, 2008.

[53] [53] SNOECK D, VELASCO L F, MIGNON A, et al. The effects of superabsorbent polymers on the microstructure of cementitious materials studied by means of sorption experiments［J］. Cem Concr Res, 2015, 77: 26-35.

[55] [55] KANG S H, HONG S G, MOON J. The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete［J］. Constr Build Mater, 2018, 172: 29-40.

[56] [56] FARZANIAN K, GHAHREMANINEZHAD A. The effect of the capillary forces on the desorption of hydrogels in contact with a porous cementitious material［J］. Mater Struct, 2017, 50(216): 1-15.

[57] [57] SCHRFL C, MECHTCHERINE V, GORGES M. Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage［J］. Cem Concr Res, 2012, 42(6): 865-873.

[58] [58] MA X, YUAN Q, LIU J, et al. Effect of water absorption of SAP on the rheological properties of cement-based materials with ultra-low w/b ratio［J］. Constr Build Mater, 2019, 195: 66-74.

[59] [59] KANG S, HONG S, MOON J. Importance of drying to control internal curing effects on field casting ultra-high performance concrete［J］. Cem Concr Res, 2018, 108: 20-30.

[60] [60] ADAMS C J, BOSE B, OLEK J, et al. Evaluation of mix design strategies to optimize flow and strength of mortar internally cured with superabsorbent polymers［J］. Constr Build Mater, 2022, 324: 126664.

[62] [62] KONG X M, ZHANG Z L, LU Z C. Effect of pre-soaked superabsorbent polymer on shrinkage of high-strength concrete［J］. Mater Struct, 2015, 48(9): 2741-2758.

[63] [63] MIGNON A, SNOECK D, D HALLUIN K, et al. Alginate biopolymers: Counteracting the impact of superabsorbent polymers on mortar strength［J］. Constr Build Mater, 2016, 110: 169-174.

[64] [64] HASHOLT M T, JESPERSEN M, JENSEN O M. Mechanical properties of concrete with SAP. Part I: Development of compressive strength［C］//International RILEM Conference on Use of Superabsorbent Polymers and Other New Additives in Concrete, Technical University of Denmark, Lyngby, Denmark, 2010.

[66] [66] BALOCH H, USMAN M, RIZWAN S A, et al. Properties enhancement of super absorbent polymer (SAP) incorporated self-compacting cement pastes modified by nano silica (NS) addition［J］. Constr Build Mater, 2019, 203: 18-26.

[67] [67] HASHOLT M T, JENSEN O M, KOVLER K, et al. Can superabsorent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength?［J］. Constr Build Mater, 2012, 31: 226-230.

[68] [68] OLAWUYI B J, BOSHOFF W P. Compressive strength of high-performance concrete with absorption capacity of Super-Absorbing-Polymers (SAP)［C］//Research and Applications in Structural Engineering, Mechanics and Computation, London, 2013.

[70] [70] SUN B, WU H, SONG W, et al. Design methodology and mechanical properties of Superabsorbent Polymer (SAP) cement-based materials［J］. Constr Build Mater, 2019, 204: 440-449.

[71] [71] LEFEVER G, TSANGOURI E, SNOECK D, et al. Combined use of superabsorbent polymers and nanosilica for reduction of restrained shrinkage and strength compensation in cementitious mortars［J］. Constr Build Mater, 2020, 251: 118966.

[73] [73] BOSE B, DAVIS C R, ERK K A. Microstructural refinement of cement paste internally cured by polyacrylamide composite hydrogel particles containing silica fume and nanosilica［J］. Cem Concr Res, 2021, 143(7): 106400.

[74] [74] BEUSHAUSEN H, GILLMER M, ALEXANDER M. The influence of superabsorbent polymers on strength and durability properties of blended cement mortars［J］. Cem Concr Compos, 2014, 52: 73-80.

[75] [75] TAN Y, LU X, HE R, et al. Influence of superabsorbent polymers (SAPs) type and particle size on the performance of surrounding cement-based materials［J］. Constr Build Mater, 2021, 270: 121442.

[76] [76] JUSTS J, WYRZYKOWSKI M, BAJARE D, et al. Internal curing by superabsorbent polymers in ultra-high performance concrete［J］. Cem Concr Res, 2015, 76: 82-90.

[77] [77] DE SENSALE G R, GONCALVES A F. Effects of fine LWA and SAP as internal water curing agents［J］. Int J Concr Struct M, 2014, 8(3): 229-238.

[78] [78] ALMEIDA F C R, KLEMM A J. Efficiency of internal curing by superabsorbent polymers (SAP) in PC-GGBS mortars［J］. Cem Concr Compos, 2018, 88: 41-51.

[79] [79] ZHONG P, WYRZYKOWSKI M, TOROPOVS N, et al. Internal curing with superabsorbent polymers of different chemical structures［J］. Cem Concr Res, 2019, 123: 105789.

[81] [81] ASSMANN A, REINHARDT H W. Tensile creep and shrinkage of SAP modified concrete［J］. Cem Concr Res, 2014, 58: 179-185.

[82] [82] XIN J, HUANG D, LI J, et al. Effect of SAP on the tensile creep of early-age concrete using ring specimens［J］. Eur J Environ Civ En, 2018, 22(7): 869-882.

[84] [84] URGESSA G, CHOI K, YEON J. Internal relative humidity, autogenous shrinkage, and strength of cement mortar modified with superabsorbent polymers［J］. Polymers-Basel, 2018, 10(10): 1074.

[85] [85] ZHANG M, ABA M, SAKOI Y, et al. Synergetic effect of expansive agent (KEA) and superabsorbent polymers (SAP) on the shrinkage, strength and pore structures of mortars［J］. J Adv Concr Technol, 2021, 19(1): 26-39.

[86] [86] SHEN D, LIU C, JIANG J, et al. Influence of super absorbent polymers on early-age behavior and tensile creep of internal curing high strength concrete［J］. Constr Build Mater, 2020, 258: 120068.

[87] [87] CRAEYE B, GEIRNAERT M, SCHUTTER G D. Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks［J］. Constr Build Mater, 2011, 25(1): 1-13.

[88] [88] WANG W B, LIU J P, TIAN Q, et al. Effects of water absorption and size of superabsorbent polymers on internal curing of cement paste［J］. Mater Sci Forum, 2013, 743-744: 193-197.

[89] [89] PANG L F, RUAN S Y, CAI Y T. Effects of internal curing by super absorbent polymer on shrinkage of concrete［J］. Key Eng Mater, 2011, 477: 200-204.

[90] [90] AZARIJAFARI H, KAZEMIAN A, RAHIMI M, et al. Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-consolidating lightweight concrete［J］. Constr Build Mater, 2016, 113: 215-220.

[91] [91] WANG F, ZHOU Y, PENG B, et al. Autogenous shrinkage of concrete with super-absorbent polymer［J］. Aci Mater J, 2009, 16(2): 123-127.

[92] [92] TU W, ZHU Y, FANG G, et al. Internal curing of alkali-activated fly ash-slag pastes using superabsorbent polymer［J］. Cem Concr Res, 2019, 116: 179-190.

[93] [93] GUO L, ZHANG F, ZHONG L, et al. Texture analysis of the microstructure of concrete with different concentrations of superabsorbent polymer after internal curing［J］. Mater Today Commun, 2021, 27: 102361.

[94] [94] MECHTCHERINE V, GORGES M, SCHROEFL C, et al. Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test［J］. Mater Struct, 2014, 47(3): 541-562.

[95] [95] LURA P. Autogenous strain of cement pastes with superabsorbent polymers［C］//RILEM Publications SARL: International Rilem Conference Onchanges of Hardening Concrete: Testing & Mitigation, Paris, France, 2006.

[96] [96] LIU J, FARZADNIA N, KHAYAT K H, et al. Effects of SAP characteristics on internal curing of UHPC matrix［J］. Constr Build Mater, 2021, 280: 122530.

[97] [97] SNOECK D, JENSEN O M, De BELIE N. The influence of superabsorbent polymers on the autogenous shrinkage properties of cement pastes with supplementary cementitious materials［J］. Cem Concr Res, 2015, 74: 59-67.

[98] [98] JENSEN O M, HANSEN P F. Water-entrained cement-based materials.II. Experimental observations［J］. Cem Concr Res, 2002, 32(6): 973-978.

[99] [99] SHEN D, WANG X, CHENG D, et al. Effect of internal curing with super absorbent polymers on autogenous shrinkage of concrete at early age［J］. Constr Build Mater, 2016, 106: 512-522.

[100] [100] ROSTAMI R, KLEMM A J, ALMEIDA F C R. Reduction of shrinkage by superabsorbent polymers (SAP) in fibre reinforced mortars［J］. Constr Build Mater, 2021, 288: 123109.

[101] [101] TAN Y, CHEN H, WANG Z, et al. Performances of cement mortar incorporating superabsorbent polymer (SAP) using different dosing methods［J］. Materials, 2019, 12(10): 1619.

[102] [102] WU L, YU Z, ZHANG C, et al. Shrinkage and tensile properties of ultra-high-performance engineered cementitious composites (UHP-ECC) containing superabsorbent polymers (SAP) and united expansion agent (UEA)［J］. Constr Build Mater, 2022, 339: 127697.

[103] [103] LIU J, FARZADNIA N, SHI C, et al. Shrinkage and strength development of UHSC incorporating a hybrid system of SAP and SRA［J］. Cem Concr Compos, 2019, 97: 175-189.

[104] [104] HAN J, FANG H, WANG K. Design and control shrinkage behavior of high-strength self-consolidating concrete using shrinkage-reducing admixture and super-absorbent polymer［J］. J Sus Cem Mater, 2014, 3(3-4): 182-190.

[105] [105] YAO Y, ZHU Y, YANG Y. Incorporation superabsorbent polymer (SAP) particles as controlling pre-existing flaws to improve the performance of engineered cementitious composites (ECC)［J］. Constr Build Mater, 2012, 28(1): 139-145.

[106] [106] MA X, LIU J, WU Z, et al. Effects of SAP on the properties and pore structure of high performance cement-based materials［J］. Constr Build Mater, 2017, 131: 476-484.

[107] [107] LIU J, SHI C, MA X, et al. An overview on the effect of internal curing on shrinkage of high performance cement-based materials［J］. Constr Build Mater, 2017, 146: 702-712.

[108] [108] LIU L, FANG Z, HUANG Z, et al. Solving shrinkage problem of ultra-high-performance concrete by a combined use of expansive agent, super absorbent polymer, and shrinkage-reducing agent［J］. Compos Part B: Eng, 2022, 230: 109503.