[1] [1] GB/T 13305-2008. Micrographic method for determining area content of the α-phases in stainless steels ［S］. (in Chinese)

[2] [2] LIU CH S. Measuring the phase content of dual-phases stainless steel accurately ［J］. Physical Testing and Chemical Analysis Part A: Physical Testing, 2003,39(8):416-417. (in Chinese)

[3] [3] YAN H F. Research on key technologies of automatic identification system of metallography organization［D］. Nanjing: Nanjing University of Aeronautics and Astronautics,2006: 40-46. (in Chinese)

[4] [4] TANG L K. Research of some key algorithms in metallographic image analysis system ［D］. Chengdu: Sichuang University,2005:18-2. (in Chinese)

[5] [5] HUANG L H. The establish of color metallography computer-aided analysis system & the research on color image segmentation ［D］. Hangzhou: Zhejiang University, 2004:67-77. (in Chinese)

[6] [6] RAFAEL C G, RICHARD E W, STEVEN L E. Digital Image Using MATLAB ［M］. Beijing: Publishing Houses of Electronics Industry, 2006.

[7] [7] ZHANG J W, ZHANG Q H. Line-edge feature extraction based on ergodic block ［J］. Opt. Precision Eng., 2009,17(3):662-668. (in Chinese)

[8] [8] CHEN P, PAN J X, LIU B.computed tomography image edge degradation model and its application to image size measurement ［J］. Opt. Precision Eng., 2009,17(9):2269-2275. (in Chinese)

[9] [9] DENG S C, LIU T G, XIAO Z X,et al.. An automatic detection system for flatness of integrated circuit pins［C］. Proc. SPIE - The International Society for Optical Engineering, 2008 International Conference on Optical Instruments and Technology: Optical Systems and Optoelectronic Instruments，Beijing，2008,7156:715639.

[10] [10] CANNY J A.computational approach to edge detection ［J］．IEEE Trans．on Pattern Analysis and Machine Intelligence，1986，8(6): 679-698.

[11] [11] XIANG J B. Edge detection of image based on canny operator and contourlet transform ［J］. Infrared Technology, 2009,31(8):479-482 (in Chinese)

[12] [12] HE J, LIU T G, ZHANG H, et al.. Automatic seal identification using edge difference［J］. Opt. Precision Eng., 2009,17(10):2583-2591. (in Chinese)