[1] [1] Shirvanimoghaddam K, Hamim S U, Akbari M K, et al. Carbon fiber reinforced metal matrix composites: Fabrication processes and properties［J］. Composites Part A: Applied Science and Manufacturing, 2017, 92: 70-96.

[2] [2] Bunsell A R, Renard J. Fundamentals of fibre reinforced composite materials［J］. Materials Today, 2005, 8(9): 51.

[3] [3] Kim J K, Mai Y W, Mai Y W. Engineered interfaces in fiber reinforced composites［M］. Amsterdam: Elsevier Press, 1998: 171-228.

[4] [4] Daoud A. Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration［J］. Materials Science and Engineering: A, 2005, 391(1-2): 114-120.

[5] [5] Okabe T, Nishikawa M, Takeda N, et al. Effect of matrix hardening on the tensile strength of alumina fiber-reinforced aluminum matrix composites［J］. Acta Materialia, 2006, 54(9): 2557-2566.

[6] [6] Wang Tao, Zhao Yuxin, Fu Shuhong, et al. Progress and key problems in research and fabrication of fiber reinforced metal matrix composite［J］. Journal of Aeronautical Materials, 2013, 33(2): 87-96.

[7] [7] Zhao Jiaxiang. Boron fibers and their composites［J］. Fiber Composites, 2000, 12(4): 3-5.

[8] [8] Kaczmar J W, Naplocha K, Morgiel J. Microstructure and strength of Al2O3 and carbon fiber reinforced 2024 aluminum alloy composites［J］. Journal of Materials Engineering and Performance, 2014, 23(8): 2801-2808.

[9] [9] Xin Shixuan. Current technologic state of continuous silicon carbide filament［J］. Materials China, 2014, 33(5): 312-320.

[10] [10] Cao Feng, Li Xiaodong, Feng Chunxiang, et al. Fabrication, properties and application of continuous alumina fibers［J］. Aerospace Materials and Technology, 1999, 29(6): 6-10.

[11] [11] Zhang Wenlong, Chen Jiayi, Zhang Fan, et al. New progress in continuous alumina-fiber-reinforced aluminum matrix composites［J］. Materials Review, 2001, 15(6): 7-9.

[12] [12] Bhav Singh B, Balasubramanian M. Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites［J］. Journal of Materials Processing Technology, 2009, 209(4): 2104-2110.

[13] [13] Zhang J, Liu S, Lu Y, et al. Fabrication process and bending properties of carbon fibers reinforced Al-alloy matrix composites［J］. Journal of Materials Processing Technology, 2016, 231: 366-373.

[14] [14] Vidal-Sétif M H, Lancin M, Marhic C, et al. On the role of brittle interfacial phases on the mechanical properties of carbon fibre reinforced Al-based matrix composites［J］. Materials Science and Engineering: A, 1999, 272(2): 321-333.

[15] [15] Chen A S, Bushby R S, Scott V D. Deformation and damage mechanisms in fibre-reinforced aluminium alloy composites under tension［J］. Composites Part A: Applied Science and Manufacturing, 1997, 28(3): 289-297.

[16] [16] Lancin M, Marhic C. TEM study of carbon fibre reinforced aluminium matrix composites: Influence of brittle phases and interface on mechanical properties［J］. Journal of the European Ceramic Society, 2000, 20(10): 1493-1503.

[17] [17] Li S, Qi L, Zhang T, et al. Interfacial microstructure and tensile properties of carbon fiber reinforced Mg-Al-RE matrix composites［J］. Journal of Alloys and Compounds, 2016, 663: 686-692.

[18] [18] Gupta N, Nguyen N Q, Rohatgi P K. Analysis of active cooling through nickel coated carbon fibers in the solidification processing of aluminum matrix composites［J］. Composites Part B: Engineering, 2011, 42(4): 916-925.

[19] [19] Yu Zhiqiang, Wu Gaohui, Sun Dongli. Reinforcement coatings and interfaces in aluminum metal matrix composites［J］. Journal of Materials Engineering, 2001(10): 13-17.

[20] [20] Huang Y D, Hort N, Kainer K U. Thermal behavior of short fiber reinforced AlSi12CuMgNi piston alloys［J］. Composites Part A: Applied Science and Manufacturing, 2004, 35(2): 249-263.

[21] [21] Rams J, Urea A, Escalera M D, et al. Electroless nickel coated short carbon fibres in aluminium matrix composites［J］. Composites Part A: Applied Science and Manufacturing, 2007, 38(2): 566-575.

[22] [22] Tang Y, Liu L, Li W, et al. Interface characteristics and mechanical properties of short carbon fibers/Al composites with different coatings［J］. Applied Surface Science, 2009, 255(8): 4393-4400.

[23] [23] Hu W, Weirich T, Hallstedt B, et al. Interface structure, chemistry and properties of NiAl composites fabricated from matrix-coated single-crystalline Al2O3 fibres (sapphire) with and without an hBN interlayer［J］. Acta Materialia, 2006, 54(9): 2473-2488.

[24] [24] Xue L, Wang F, Ma Z, et al. Effects of surface-oxidation modification and heat treatment on silicon carbide 3D/AlCu5MgTi composites during vacuum-pressure infiltration［J］. Applied Surface Science, 2015, 356: 795-803.

[25] [25] Liang Xuming, Yu Jun, You Chuanyong. A survey of aluminium conductor with reinforced core of composite material［J］. Power System Technology, 2006, 30(19): 1-6.

[26] [26] Degischer H P. Innovative light metals: Metal matrix composites and foamed aluminium［J］. Materials & Design, 1997, 18(4-6): 221-226.

[27] [27] Wang W G, Xiao B L, Ma Z Y. Evolution of interfacial nanostructures and stress states in Mg matrix composites reinforced with coated continuous carbon fibers［J］. Composites Science and Technology, 2012, 72(2): 152-158.

[28] [28] Li Kun, Pei Zhiliang, Gong Jun, et al. Fabrication of SiO2 coating on carbon fiber and its application in Mg-based composite［J］. Acta Metallurgica Sinica, 2007, 43(12): 1282-1286.

[29] [29] Wang Haowei, Shang Baolu, Zhen Laisu, et al. Coated carbon fiber reinforced magnesium matrix composites［J］. Acta Materiae Compositae Sinica, 1992, 9(2): 73-76.

[30] [30] Russell-Stevens M, Todd R, Papakyriacou M. The effect of thermal cycling on the properties of a carbonfibre reinforced magnesium composite［J］. Materials Science and Engineering: A, 2005, 397(1-2): 249-256.

[31] [31] Ochiai S, Murakami Y. The stability of tensile deformation of single ductile fibre-ductile matrix composites with weak interfaces［J］. Journal of Materials Science, 1980, 15(7): 1798-1803.

[32] [32] Jayalakshmi S, Kailas S V, Seshan S. Tensile behaviour of squeeze cast AM100 magnesium alloy and its Al2O3 fibre reinforced composites［J］. Composites Part A: Applied Science and Manufacturing, 2002, 33(8): 1135-1140.

[33] [33] Banerji A, Hu H, Alpas A T. Sliding wear mechanisms of magnesium composites AM60 reinforced with Al2O3 fibres under ultra-mild wear conditions［J］. Wear, 2013, 301(1-2): 626-635.

[34] [34] Nayeb-Hashemi H. Mode I fatigue crack growth in a continuous alumina fibre-reinforced magnesium matrix composite［J］. International Journal of Fatigue, 1996, 18(5): 287-296.

[35] [35] Hufenbach W, Andrich M, Langkamp A, et al. Fabrication technology and material characterization of carbon fibre reinforced magnesium［J］. Journal of Materials Processing Technology, 2006, 175(1-3): 218-224.

[36] [36] Li Peihuan, Zhang Yong, Wang Tao, et al. Research progress on continuous SiC fiber reinforced metal matrix composite［J］. Journal of Materials Engineering, 2016, 44(8): 121-129.

[37] [37] Vassel A. Continuous fibre reinforced titanium and aluminium composites: A comparison［J］. Materials Science and Engineering: A, 1999, 263(2): 305-313.

[38] [38] Thomas M P, Winstone M R. Longitudinal yielding behaviour of SiC-fibre-reinforced titanium-matrix composites［J］. Composites Science and Technology, 1999, 59(2): 297-303.

[39] [39] Sun Q, Luo X, Yang Y Q, et al. Analysis on the interfacial shear strength of fiber reinforced titanium matrix composites by shear lag method［J］. Materials Science and Engineering: A, 2015, 642: 262-267.

[40] [40] Ramamurty U. Assessment of load transfer characteristics of a fiber-reinforced titanium-matrix composite［J］. Composites Science and Technology, 2005, 65(11-12): 1815-1825.

[41] [41] Fu Y C, Shi N L, Zhang D Z, et al. Effect of C coating on the interfacial microstructure and properties of SiC fiber-reinforced Ti matrix composites［J］. Materials Science and Engineering: A, 2006, 426(1-2): 278-282.

[42] [42] Luo X, Li C, Yang Y Q, et al. Microstructure and interface thermal stability of C/Mo double-coated SiC fiber reinforced γ-TiAl matrix composites［J］. Transactions of Nonferrous Metals Society of China, 2016, 26(5): 1317-1325.

[43] [43] Luo X, Yang Y, Yu Y, et al. Effect of Mo coating on the interface and mechanical properties of SiC fiber reinforced Ti6Al4V composites［J］. Materials Science and Engineering: A, 2012, 550(6): 286-292.

[44] [44] Zhang W, Yang Y Q, Zhao G M, et al. Interfacial reaction studies of B4 C-coated and C-coated SiC fiber reinforced Ti-43Al-9V composites［J］. Intermetallics, 2014, 50(4): 14-19.

[45] [45] Kong C Y, Soar R C. Fabrication of metal-matrix composites and adaptive composites using ultrasonic consolidation process［J］. Materials Science and Engineering: A, 2005, 412(1-2): 12-18.

[46] [46] Shalu T, Abhilash E, Joseph M A. Development and characterization of liquid carbon fibre reinforced aluminium matrix composite［J］. Journal of Materials Processing Technology, 2009, 209(10): 4809-4813.

[47] [47] Dong Qun, Chen Liqing, Zhao Mingjiu, et al. Fabrication, properties and application of magnesium matrix composites［J］. Materials Review, 2004, 18(4): 86-90.

[48] [48] Zhang J, Liu S, Lu Y, et al. Liquid rolling of woven carbon fibers reinforced Al5083-matrix composites［J］. Materials & Design, 2016, 95: 89-96.

[49] [49] Alhashmy H A, Nganbe M. Laminate squeeze casting of carbon fiber reinforced aluminum matrix composites［J］. Materials & Design, 2015, 67: 154-158.

[50] [50] Zeng Liying, Deng Ju, Bai Baoliang, et al. Research progress of continuous fiber reinforced titanium matrix composites［J］. Rare Metal Materials and Engineering, 2000, 29(3): 68-72.

[51] [51] Song Jianli, Li Yongtang, Deng Qilin, et al. Research progress of laser cladding forming technology［J］. Journal of Mechanical Engineering, 2010, 46(14): 29-39.

[52] [52] Li Fuquan, Feng Xinyou, Chen Yanbin. Influence of WC content on microstructure of WC/Ni60A laser cladding layer［J］. Chinese J Lasers, 2016, 43(4): 0403009.

[53] [53] Duan Xiaoxi, Gao Shiyou, Gu Yongfei, et al. Study on reinforcement mechanism and frictional wear properties of 316L-SiC mixed layer deposited by laser cladding［J］. Chinese J Lasers, 2016, 43(1): 0103004.

[54] [54] Liu Xiaopeng, Zhang Peilei, Lu Yunlong, et al. Study on tribological properties of Ni-based silicide coating on copper by laser cladding［J］. Chinese J Lasers, 2015, 42(9): 0906005.

[55] [55] Feng Shurong, Zhang Shuquan, Wang Huaming. Wear resistance of laser clad hard particles reinforced intermetallic composite coating on TA15 alloy［J］. Chinese J Lasers, 2012, 39(2): 0203002.

[56] [56] Lin D, Liu C R, Cheng G J. Single-layer graphene oxide reinforced metal matrix composites by laser sintering: Microstructure and mechanical property enhancement［J］. Acta Materialia, 2014, 80: 183-193.

[57] [57] Zhou S F, Wu C, Zhang T Y, et al. Carbon nanotube- and Fe p-reinforced copper-matrix composites by laser induction hybrid rapid cladding［J］. Scripta Materialia, 2014, 76(2): 25-28.

[58] [58] Lin Yinghua, Lei Yongping. High volume fraction and length-diameter ratio of TiB short fiber and TiB2P reinforce Ti-based alloy composite coatings by laser synthesis in-situ［J］. Chinese J Lasers, 2014, 41(7): 0703010.