[1] Xu B S. Remanufacture engineering and its development in China[J]. China Surface Engineering, 23, 1-6(2010).

[2] Wei S G, Cheng D B, Sundin E et al. Motives and barriers of the remanufacturing industry in China[J]. Journal of Cleaner Production, 94, 340-351(2015). http://www.sciencedirect.com/science/article/pii/S0959652615001183

[3] Sun L, Wei C Q, Sui X M et al. Effects of SiC particle size on microstructures and properties of TiNi based cladding layers[J]. Chinese Journal of Lasers, 45, 0502002(2018).

[4] Yang H B, Liu Z H, Ding Y D et al. Preparation of Al2O3-13%TiO2 ceramic coating in the method of thermo-chemical reaction and its properties[J]. Surface Technology, 46, 215-222(2017).

[5] Xiao Y, Gu J F, Zhang J X et al. Effects of nano-CeO2 doping on microstructure and wear performance of laser-clad Fe/Cr3C2 alloy composite coating[J]. Materials Review, 31, 65-69, 84(2017).

[6] Xu B S, Zhu S H, Liu S C[M]. Materials surface engineering(2005).

[7] Zhang Q M, He J J, Liu W J et al. Microstructure characteristics of ZrC-reinforced composite coating produced by laser cladding[J]. Surface and Coatings Technology, 162, 140-146(2003). http://www.sciencedirect.com/science/article/pii/S0257897202006977

[8] Paul C P, Gandhi B K, Bhargava P et al. Cobalt-free laser cladding on AISI type 316L stainless steel for improved cavitation and slurry erosion wear behavior[J]. Journal of Materials Engineering and Performance, 23, 4463-4471(2014). http://link.springer.com/article/10.1007/s11665-014-1244-9

[9] van Acker K, Vanhoyweghen D, Persoons R et al. . Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings[J]. Wear, 258, 194-202(2005). http://www.sciencedirect.com/science/article/pii/S0043164804002662

[10] Weng F, Yu H J, Chen C Z et al. Fabrication of Co-based coatings on titanium alloy by laser cladding with CeO2 addition[J]. Materials and Manufacturing Processes, 31, 1461-1467(2016). http://www.tandfonline.com/doi/abs/10.1080/10426914.2016.1140199

[11] Zhang G Y, Wang C L, Gao Y. Mechanism of rare earth CeO2 on the Ni-based laser cladding layer of 6063 Al surface[J]. Rare Metal Materials and Engineering, 45, 1003-1007(2016).

[12] Wu D J, Chen Y X, Lu W F et al. Dilution characters of Al2O3-13wt%TiO2 coating by direct laser cladding on titanium alloy[J]. Rare Metal Materials and Engineering, 41, 2105-2108(2012).

[13] Wang K M, Lei Y P, Wei S Z et al. Effect of WC content on microstructure and properties of laser cladding Ni-based WC composite coating[J]. Transactions of Materials and Heat Treatment, 37, 172-179(2016).

[14] Tan C W, Lu Q S, Chen B et al. Influence of laser power on microstructure and mechanical properties of laser welded-brazed Mg to Ni coated Ti alloys[J]. Optics & Laser Technology, 89, 156-167(2017). http://www.sciencedirect.com/science/article/pii/S0030399216309343

[15] Zhang Y, Song B H, Xue F. Influence of dilution on microstructure and properties in Ni based laser clad coating[J]. Applied Laser, 36, 259-264(2016).

[16] Pan H, Zhao J F, Liu Y L et al. Controllability research on dilution ratio of nickel-based superalloy by laser cladding reparation[J]. Chinese Journal of Lasers, 40, 0403007(2013).

[17] Chen J F, Chen G Y, Sun L Y et al. Investigation of dilution ratio and strengthening effect of laser cladded coating on H13 steel[J]. Laser Technology, 41, 596-601(2017).

[18] Adebiyi D I. Popoola A P I. Mitigation of abrasive wear damage of Ti-6Al-4V by laser surface alloying[J]. Materials & Design, 74, 67-75(2015). http://www.sciencedirect.com/science/article/pii/S0261306915000564

[19] Yu X X, Yin D F, Yu Z M et al. Effects of cerium addition on solidification behaviour and intermetallic structure of novel Al-Cu-Li alloys[J]. Rare Metal Materials and Engineering, 45, 1423-1429(2016).

[20] Chen R, Xu Q Y, Liu B C. Cellular automaton simulation of three-dimensional dendrite growth in Al-7Si-Mg ternary aluminum alloys[J]. Computational Materials Science, 105, 90-100(2015). http://www.sciencedirect.com/science/article/pii/S0927025615002736

[21] Shu X Y, Hu L L, Li G F et al. High-temperature oxidation resistance of the Ni60Ti alloy: An experimental and first-principles study[J]. Journal of Alloys and Compounds, 706, 297-304(2017). http://www.sciencedirect.com/science/article/pii/S0925838817306588

[22] Chao M J, Liang E J, Zhao D. Effect of TiO2 on the laser cladding layers of Ni-based alloy on 45# steel[J]. Chinese Journal of Lasers, 30, 947-952(2003).

[23] Li J, Li H, Yu H D et al. Research on preparation and corrosion resistance of superhydrophobic surfaces on carbon steels[J]. China Mechanical Engineering, 27, 3241-3246(2016).

[24] Liu Y X, Bian D, Zhao Y W et al. Anti-corrosion performance of chemically bonded phosphate ceramic coatings reinforced by nano-TiO2[J]. Journal of the Mechanical Behavior of Biomedical Materials, 86, 208-214(2018). http://europepmc.org/abstract/MED/29986295

[25] Lü X Q, Chen Y X. Effect of hydrogen traps on diffusion of hydrogen in SM490B clean steel[J]. Shanghai Metals, 35, 14-18(2013).