Infrared and Laser Engineering, Volume. 47, Issue 8, 803001(2018)
Research progress and future perspective on ultrafast fiber laser enabled by computing technique (invited)
[1] [1] Fermann M E, Hartl I. Ultrafast fibre lasers[J]. Nat Photonics, 2013, 7(11): 868-874.
[2] [2] Liu M, Luo A, Yan Y, et al. Successive soliton explosions in an ultrafast fiber laser[J]. Opt Lett, 2016, 41(6): 1181-1184.
[3] [3] Mou C, Sergeyev S, Rozhin A, et al. All-fiber polarization locked vector soliton laser using carbon nanotubes[J]. Opt Lett, 2011, 36(19): 3831-3833.
[4] [4] Liu Y, Li W, Luo D, et al. Generation of 33 fs 93.5 W average power pulses from a third-order dispersion managed self-similar fiber amplifier[J]. Opt Express, 2016, 24(10): 10939-10945.
[5] [5] Shah L, Fermann M E, Dawson J W, et al. Micromachining with a 50 W, 50 μJ, sub-picosecond fiber laser system[J]. Opt Express, 2006, 14(25): 12546-12551.
[6] [6] Lu H K O, Elahi P, Aalan A, et al. High-repetition-rate ultrafast fiber lasers for material processing[J]. IEEE J Sel Top Quantum Electron, 2018, 24(3): 8800312.
[7] [7] Limpert J, Roser F, Schimpf D N, et al. High repetition rate gigawatt peak power fiber laser systems: challenges, design, and experiment[J]. IEEE J Sel Top Quantum Electron, 2009, 15(1): 8800312.
[8] [8] Frantz L M, Nodvik J S. Theory of pulse propagation in a laser amplifier[J]. J Appl Phys, 1963, 34(8): 2346-2349.
[9] [9] Wang Y, Po H. Dynamic characteristics of double-clad fiber amplifiers for high-power pulse amplification[J]. J Lightwave Technol, 2003, 21(10): 2262-2270.
[10] [10] Schimpf D N, Ruchert C, Nodop D, et al. Compensation of pulse-distortion in saturated laser amplifiers[J]. Opt Express, 2008, 16(22): 17637-17646.
[11] [11] Su R, Zhou P, Wang X, et al. Active coherent beam combination of two high-power single-frequency nanosecond fiber amplifiers[J]. Opt Lett, 2012, 37(4): 497-499.
[12] [12] Su R, Zhou P, Wang X, et al. Active coherent beam combining of a five-element, 800 watt nanosecond fiber amplifier array[J]. Opt Lett, 2012, 37(19): 3978-3980.
[13] [13] Malinowski A, Vu K T, Chen K K, et al. High power pulsed fiber MOPA system incorporating electro-optic modulator based adaptive pulse shaping[J]. Opt Express, 2009, 17(23): 20927-20937.
[14] [14] Lin D, Alam S, Chen K, et al. 100W, fully-fiberised ytterbium doped master oscillator power amplifier incorporating adaptive pulse shaping[C]//Conference on Lasers and Electro-Optics/International Quantum Electronics Conference, 2009, CFM4.
[15] [15] Malinowski A, Gorman P, Codemard C A, et al. High-peak-power, high-energy, high-average-power pulsed fiber laser system with versatile pulse duration and shape[J]. Opt Lett, 2013, 38(22): 4686-4689.
[16] [16] Jiang M, Su R, Zhang P, et al. Arbitrary temporal shape pulsed fiber laser based on SPGD algorithm[J]. Laser Physics Letters, 2018, 15(6): 065101.
[17] [17] Sobon G A K P. Pulsed dual-stage fiber MOPA source operating at 1 550 nm with arbitrarily shaped output pulses[J]. Appl Phys B, 2011, 105(4): 721-727.
[18] [18] Li Z, Heidt A M, Teh P S, et al. High-energy diode-seeded nanosecond 2 μm fiber MOPA systems incorporating active pulse shaping[J]. Opt Lett, 2014, 39(6): 1569-1572.
[19] [19] Shi H A T F. High-power diode-seeded thulium-doped fiber MOPA incorporating active pulse shaping[J]. Appl Phys B, 2016, 122(10): 269.
[20] [20] Zhang H, Tang D Y, Zhao L M, et al. Large energy mode locking of an erbium-doped fiber laser with atomic layer graphene[J]. Opt Express, 2009, 17(20): 17630-17635.
[21] [21] Sun Z, Hasan T, Torrisi F, et al. Graphene mode-locked ultrafast laser[J]. ACS Nano, 2010, 4(2): 803-810.
[22] [22] Wang X, Zhou P, Wang X, et al. Pulse bundles and passive harmonic mode-locked pulses in Tm-doped fiber laser based on nonlinear polarization rotation[J]. Opt Express, 2014, 22(5): 6147-6153.
[23] [23] Fermann M E, Andrejco M J, Silberberg Y, et al. Passive mode locking by using nonlinear polarization evolution in a polarization-maintaining erbium-doped fiber[J]. Opt Lett, 1993, 18(11): 894-896.
[24] [24] Yu Y, Teng H, Wang H, et al. Highly-stable mode-locked PM Yb-fiber laser with 10 nJ in 93-fs at 6 MHz using NALM[J]. Opt Express, 2018, 2 6(8): 10428-10434.
[25] [25] Haus H A. Mode-locking of lasers[J]. IEEE J Sel Top Quantum Electron, 2000, 6(6): 1173-1185.
[26] [26] Baumeister T, Brunton S L, Kutz J N. Deep learning and model predictive control for self-tuning mode-locked lasers[J]. J Opt Soc Am B, 2018, 35(3): 617-626.
[27] [27] Hellwig T A W T. Automated characterization and alignment of passively mode-locked fiber lasers based on nonlinear polarization rotation[J]. Appl Phys B, 2010, 101(3): 565-570.
[28] [28] Shen X, Li W, Yan M, et al. Electronic control of nonlinear-polarization-rotation mode locking in Yb-doped fiber lasers[J]. Opt Lett, 2012, 37(16): 3426-3428.
[29] [29] Olivier M, Gagnon M, E M P. Automated mode locking in nonlinear polarization rotation fiber lasers by detection of a discontinuous jump in the polarization state[J]. Opt Express, 2015, 23(5): 6738-6746.
[30] [30] Radnatarov D, Khripunov S, Kobtsev S, et al. Automatic electronic-controlled mode locking self-start in fibre lasers with non-linear polarisation evolution[J]. Opt Express, 2013, 21(18): 20626-20631.
[31] [31] Woodward R I, Kelleher E J R. Towards "smart lasers": self-optimisation of an ultrafast pulse source using a genetic algorithm[J]. Scientific Reports, 2016, 6: 37616.
[32] [32] Brunton S L, Fu X, Kutz J N. Extremum-seeking control of a mode-locked laser[J]. IEEE J Quantum Electron, 2013, 49(10): 852-861.
[33] [33] Brunton S L, Fu X, Kutz J N. Self-tuning fiber lasers[J]. IEEE J Sel Top Quantum Electron, 2014, 20(5): 1101408.
[34] [34] Andral U, Fodil R S, Amrani F, et al. Fiber laser mode locked through an evolutionary algorithm[J]. Optica, 2015, 2(4): 275-278.
[35] [35] Andral U, Buguet J, Fodil R S, et al. Toward an autosetting mode-locked fiber laser cavity[J]. J Opt Soc Am B, 2016, 33(5): 825-833.
[36] [36] Woodward R I, Kelleher E J. Self-optimizing mode-locked laser using a genetic algorithm[C]//Conference on Lasers and Electro-Optics, 2016, STu3P.6.
[37] [37] Winters D G, Kirchner M S, Backus S J, et al. Electronic initiation and optimization of nonlinear polarization evolution mode-locking in a fiber laser[J]. Opt Express, 2017, 25(26): 33216-33225.
[38] [38] Woodward R I, Kelleher E J R. Genetic algorithm-based control of birefringent filtering for self-tuning, self-pulsing fiber lasers[J]. Opt Lett, 2017, 42(15): 2952-2955.
[39] [39] Burgoyne B, Illeneuve A V. Programmable lasers: design and applications[C]//SPIE, 2010, 7580: 758002.
[40] [40] Théberge F, Daigle J F, Villeneuve A, et al. Tunable mid-infrared generation using synchronized programmable fiber lasers[C]//SPIE, 2012, 8381: 83810E.
[41] [41] Mourou G, Brocklesby B, Tajima T, et al. The future is fibre accelerators[J]. Nat Photonics, 2013, 7(4): 258-261.
[42] [42] Moustaizis S D, Lalousis P, Perrakis K, et al. ICAN: High power neutral beam generation[J]. Eur Phys J Special Topics, 2015, 224(13): 2639-2643.
[43] [43] Liu Z, Zhou P, Xu X, et al. Coherent Beam Combing of High Average Power Fiber Lasers[M]. Beijing: National Defence Industry Press, 2016. (in Chinese)
[44] [44] Vorontsov M A, Carhart W, Ricklin J C. Adaptive phase-distortion correction based on parallel gradient-descent optimization[J]. Opt Lett, 1997, 22(12): 907-909.
[46] [46] Jiang M, Su R, Zhang Z, et al. Coherent beam combining of fiber lasers using a CDMA-based single-frequency dithering technique[J]. Appl Opt, 2017, 56(15): 4255-4260.
[47] [47] Jiang M, Su R, Zhang Z, et al. Joint multiple access based efficient coherent beam combining of fiber lasers[J]. Laser Phys, 2018. (Submitted)
[48] [48] Goodno G D, Weiss S B. Automated co-alignment of coherent fiber laser arrays via active phase-locking[J]. Opt Express, 2012, 20(14): 14945-14953.
[49] [49] Su R, Zhou P, Zhang P, et al. Review on the progress in coherent beam combining of ultra-short fiber lasers[J]. Infrared and Laser Engineering, 2018, 47(1): 0103001. (in Chinese)
[50] [50] Yu H L, Zhang Z X, Wang X L, et al. High average power coherent femtosecond pulse combining system based on an all fiber active control method[J]. Laser Phys Lett, 2018, 15(7): 075101.
[51] [51] Jauregui C, Limpert J, Tunnermann A. High-power fibre lasers[J]. Nat Photon, 2013, 7(11): 861-867.
[52] [52] Tao R, Wang X, Zhou P. Comprehensive theoretical study of mode instability in high-power fiber lasers by employing a universal model and its implications[J]. IEEE J Sel Top Quantum Electron, 2018, 24(3): 0903319.
[53] [53] Pangovski K, Sparkes M, Cockburn A, et al. Control of material transport through pulse shape manipulation-a development toward designer pulses[J]. IEEE J Sel Top Quantum Electron, 2014, 20(5): 0901413.
[54] [54] Tercan H A K T. Improving the laser cutting process design by machine learning techniques[J]. Production Engineering, 2017, 11(2): 195-203.
[55] [55] Zhou P. Intelligent laser: a versatile tool for multidisciplinary education in photonics[C]//International Conference on Education and Training in Optics and Photonics (ETOP), 2017.
Get Citation
Copy Citation Text
Zhou Pu, Su Rongtao, Huang Liangjin, Li Jun. Research progress and future perspective on ultrafast fiber laser enabled by computing technique (invited)[J]. Infrared and Laser Engineering, 2018, 47(8): 803001
Category: 特约专栏-"超快光纤激光技术专栏(一)"
Received: Apr. 7, 2018
Accepted: May. 12, 2018
Published Online: Aug. 29, 2018
The Author Email: Pu Zhou (zhoupu203@163.com)