[2] [2] uan, ZHOU Chunying, YANG Yajin. J Chin Ceram Soc, 2012, 40(11): 1618-1624.

[9] [9] QUILLIN K. Performance of belite-sulfoaluminate cements[J]. Cem Concr Res, 2001, 31(9): 1341-1349.

[10] [10] HARGIS C W, KIRCHHEIM A P, MONTEIRO P J M, et al. Early age hydration of calcium sulfoaluminate (synthetic ye'elimite,) in the presence of gypsum and varying amounts of calcium hydroxide[J]. Cem Concr Res, 2013, 48: 105-115.

[11] [11] MORSLI K, DE LA TORRE  G, ZAHIR M, et al. Mineralogical phase analysis of alkali and sulfate bearing belite rich laboratory clinkers[J]. Cem Concr Res, 2007, 37(5): 639-646.

[12] [12] LI J, ZHOU Chun Ying, YANG ya jin. Effects of foreign ions on minerals of high belite-calcium sulfoaluminate cement[J]. Mater Sci Forum, 2013, 743-744: 239-244.

[13] [13] CUESTA A, LOSILLA E R, ARANDA M A G, et al. Reactive belite stabilization mechanisms by boron-bearing dopants[J]. Cem Concr Res, 2012, 42(4): 598-606.

[14] [14] BENARCHID M Y, DIOURI A, BOUKHARI A, et al. Hydration of iron-phosphorus doped dicalcium silicate phase[J]. Mater Chem Phys, 2005, 94(2/3): 190-194.

[15] [15] KOUMPOURI D, ANGELOPOULOS G N. Effect of boron waste and boric acid addition on the production of low energy belite cement[J]. Cem Concr Compos, 2016, 68: 1-8.

[16] [16] BENARCHID M Y, ROGEZ J. The effect of Cr2O3 and P2O5 additions on the phase transformations during the formation of calcium sulfoaluminate C4A3S-[J]. Cem Concr Res, 2005, 35(11): 2074-2080.

[17] [17] ZEA-GARCIA J D, SANFELIX S G, VALLCORBA O, et al. Hydration activation of alite-belite-ye’elimite cements by doping with boron[J]. ACS Sustain Chem Eng, 2020, 8(9): 3583-3590.

[18] [18] CUBEROS A J M, DE LA TORRE  G, LVAREZ-PINAZO G, et al. Active iron-rich belite sulfoaluminate cements: clinkering and hydration[J]. Environ Sci Technol, 2010, 44(17): 6855-6862.

[19] [19] SHEN Y, YANG D Y, ZHANG M, et al. Active sulfate-rich belite sulfoaluminate cement[J]. Adv Cem Res, 2017, 29(4): 166-173.

[20] [20] HUANG Y B, QIAN J S, KANG X J, et al. Belite-calcium sulfoaluminate cement prepared with phosphogypsum: influence of P2O5 and F on the clinker formation and cement performances[J]. Constr Build Mater, 2019, 203: 432-442.

[21] [21] LI J, MA B, ZHOU C Y, et al. Study on mechanism of chemical activation for minerals of high belite-calcium sulfoaluminate clinker[J]. J Sustain Cem Based Mater, 2014, 3: 13-23.

[22] [22] HUANG Y B, QIAN J S, LIU C Z, et al. Influence of phosphorus impurities on the performances of calcium sulfoaluminate cement[J]. Constr Build Mater, 2017, 149: 37-44.

[23] [23] BEN HAHA M, WINNEFELD F, PISCH A. Advances in understanding ye'elimite-rich cements[J]. Cem Concr Res, 2019, 123: 105778.

[24] [24] LAI G C, NOJIRI T, NAKANO K I. Studies of the stability of β-Ca2SiO4 doped by minor ions[J]. Cem Concr Res, 1992, 22(5): 743-754.

[26] [26] PREZ-BRAVO R, MORALES-CANTERO A, BRUSCOLINI M, et al. Effect of boron and water-to-cement ratio on the performances of laboratory prepared belite-ye’elimite-ferrite (BYF) cements[J]. Materials, 2021, 14(17): 4862.

[27] [27] HKFORS B, BOSTRM D, VIGGH E, et al. On the phase chemistry of Portland cement clinker[J]. Adv Cem Res, 2015, 27: 50-60.