[1] [1] HABEL K, VIVIANI M, DENARI E, et al. Development of the mechanical properties of an ultra-high performance fiber reinforced concrete (UHPFRC)［J］. Cemd Concr Res, 2006, 36(7): 1362-1370.

[2] [2] SHI C, WU Z, XIAO J, et al. A review on ultra high performance concrete: Part I. Raw materials and mixture design［J］. Constr Build Mater, 2015, 101, Part 1: 741-751.

[8] [8] NAHUM L, PELED A, GAL E. The flexural performance of structural concrete beams reinforced with carbon textile fabrics［J］. Compos Struct, 2020, 239: 111917.

[9] [9] BOTELHO GOLIATH K, CARDOSO D C T, DE A SILVA F. Flexural behavior of carbon-textile-reinforced concrete I-section beams［J］. Compos Struct, 2021, 260: 113540.

[15] [15] GONG T, AHMED A H, CUROSU I, et al. Tensile behavior of hybrid fiber reinforced composites made of strain-hardening cement-based composites (SHCC) and carbon textile［J］. Constr Build Mater, 2020, 262: 120913.

[16] [16] ROSSI E, RANDL N, MSZLY T, et al. Flexural Strengthening with Fiber-/Textile-Reinforced Concrete［J］. Struct J, 2021, 118(4): 97-107.

[18] [18] ACI Committee 549. ACI 549.4R-13 Guide To Design And Construction Of Externally Bonded Fabric-Reinforced Cementitious Matrix (FRCM) Systems For Repair And Strengthening Concrete And Masonry Structures［R］. Farmington Hills, USA, ACI, 2013.

[19] [19] ZHANG J, STANG H. Applications of stress crack width relationship in predicting the flexural behavior of fibre-reinforced concrete［J］. Cem Concr Res, 1998, 28(3): 439-452.

[20] [20] DE OLIVEIRA E SOUSA J L A, GETTU R. Determining the tensile stress-crack opening curve of concrete by inverse analysis［J］. J Eng Mech, 2006, 132(2): 141-148.

[21] [21] LPEZ J , SERNA P, NAVARRO-GREGORI J, et al. A simplified five-point inverse analysis method to determine the tensile properties of UHPFRC from unnotched four-point bending tests［J］. Composites Part B: Engineering, 2016, 91: 189-204.

[22] [22] VAN ZIJL G P A G, MBEWE P B K. Flexural modelling of steel fibre-reinforced concrete beams with and without steel bars［J］. Eng Struct, 2013, 53: 52-62.

[23] [23] SORANAKOM C, MOBASHER B. Correlation of tensile and flexural responses of strain softening and strain hardening cement composites［J］. Cem Concr Compos, 2008, 30(6): 465-477.

[25] [25] MOBASHER B, DEY V, COHEN Z, et al. Correlation of constitutive response of hybrid textile reinforced concrete from tensile and flexural tests［J］. Cem Concr Composi, 2014, 53: 148-161.

[26] [26] MOBASHER B, YAO Y, SORANAKOM C. Analytical solutions for flexural design of hybrid steel fiber reinforced concrete beams［J］. Eng Struct, 2015, 100: 164-177.

[27] [27] YAO Y, ASWANI K, WANG X, et al. Analytical displacement solutions for statically determinate beams based on a trilinear moment-curvature model［J］. Struct Concr, 2018, 16(9): 1619-1632.

[28] [28] YAO Y, MOBASHER B, WANG J, et al. Analytical approach for the design of flexural elements made of reinforced ultra-high performance concrete［J］. Struct Concr, 2020, 22(1): 298-317.

[29] [29] LIU S, WANG X, RAWAT P, et al. Experimental study and analytical modeling on tensile performance of basalt textile reinforced concrete［J］. Constr Build Mater, 2021, 267: 120972.

[31] [31] YAO Y, SILVA F A, BUTLER M, et al. Tension stiffening in textile-reinforced concrete under high speed tensile loads［J］. Cem Concr Compos, 2015, 64: 49-61.

[32] [32] SORANAKOM C, MOBASHER B. Modeling of tension stiffening in reinforced cement composites: Part I. Theoretical modeling［J］. Mater Struct, 2010, 43(9): 1217-1230.

[33] [33] SORANAKOM C, MOBASHER B. Modeling of tension stiffening in reinforced cement composites: Part II. Simulations versus experimental results［J］. Mater Struct, 2010, 43(9): 1231-1243.