[1] [1] EKSTR?M T, NYGREN M. SiAION ceramics[J]. J Am Ceram Soc, 1992, 75(2): 259–276.

[4] [4] KANZAKI S, BRITO M E, VALECILLOS M C, et al. Microstructure designing of silicon nitride[J]. J Eur Ceram Soc, 1997, 17(15–16): 1841–1847.

[5] [5] MILLER P D, BOWMAN K J. Hertzian fracture of textured Si3N4[J]. Acta Mater, 1996, 44(8): 3025–3034.

[6] [6] ZHU X W, SAKKA Y. Textured silicon nitride: Processing and anisotropic properties[J]. Sci Technol Adv Mater, 2008, 9(3): 033001.

[7] [7] JIANG Q G, LIU J, GUO W M, et al. A novel hot pressing flowing sintering for preparation of texturing ceramics[J]. J Am Ceram Soc, 2015, 98(9): 2696–2699.

[8] [8] ZHU X W, SUZUKI T S, UCHIKOSHI T, et al. Highly texturing β-sialon via strong magnetic field alignment[J]. J Am Ceram Soc, 2008, 91(2): 620–623.

[9] [9] KUSHAN S R, TAMSU N, ACIKBAS N C, et al. Textured α-SiAlON ceramics via templated grain growth[J]. Mater Sci Forum, 2007, 554: 79–84.

[10] [10] ZHU X W, SAKKA Y, ZHOU Y, et al. A strategy for fabricating textured silicon nitride with enhanced thermal conductivity[J]. J Eur Ceram Soc, 2014, 34(10): 2585–2589.

[11] [11] CARMAN A, PERELOMA E, CHENG Y B. Hot forging of a textured α-sialon ceramic[J]. J Am Ceram Soc, 2006, 89(2): 478–483.

[12] [12] LIU G H, CHEN K X, ZHOU H P, et al. Shape deformation and texture development of consolidated Ca α-SiAlON ceramics prepared by hot-forging[J]. Mater Res Bull, 2008, 43(2): 425–430.

[13] [13] LOTGERING F K. Topotactical reactions with ferrimagnetic oxides having hexagonal crystal structures—II[J]. J Inorg Nucl Chem, 1960, 16(1–2): 100–108.

[14] [14] EVANS A G, CHARLES E A. Fracture toughness determinations by indentation[J]. J Am Ceram Soc, 1976, 59(7–8): 371–372.

[15] [15] CHAKRABORTY D, MUKERJI J. Effect of crystal orientation, structure and dimension on vickers microhardness anisotropy of β-, α-Si3N4, α-SiO2 and α-SiC single crystals[J]. Mater Res Bull, 1982, 17(7): 843–849.

[16] [16] HAY J C, SUN E Y, PHARR G M, et al. Elastic anisotropy of ?-silicon nitride whiskers[J]. J Am Ceram Soc, 1998, 81(10): 2661–2669.

[17] [17] OHJI T, HIRAO K, KANZAKI S. Fracture resistance behavior of highly anisotropic silicon nitride[J]. J Am Ceram Soc, 1995, 78(11): 3125–3128.

[18] [18] KONDO N, INAGAKI Y, SUZUKI Y, et al. High-temperature fracture energy of superplastically forged silicon nitride[J]. J Am Ceram Soc, 2001, 84(8): 1791–1796.

[19] [19] LANGE F F. Relation between strength, fracture energy, and microstructure of hot-pressed Si3N4[J]. J Am Ceram Soc, 1973, 56(10): 518–522.

[20] [20] NAKAMURA M, HIRAO K, YAMAUCHI Y, et al. Tribological properties of unidirectionally aligned silicon nitride[J]. J Am Ceram Soc, 2001, 84(11): 2579–2584.

[21] [21] PARK D S, CHOI M J, ROH T W, et al. Orientation-dependent properties of silicon nitride with aligned reinforcing grains[J]. J Mater Res, 2000, 15(1): 130–135.

[22] [22] ZHAN G D, MITOMO M, XIE R J, et al. The deformation mechanisms of superplastic flow in fine-grained beta-silicon nitride ceramics[J]. Acta Mater, 2000, 48(9): 2373–2382.

[23] [23] JEFFERY G. The motion of ellipsoidal particles immersed in a viscous fluid[J]. Proc R Soc Lond A, 1922, 102(715): 161–179.

[24] [24] TAN D W, LAO Z Y, GUO W M, et al. Fabrication and modelling of Si3N4 ceramics with radial grain alignment generated through centripetal sinter-forging[J]. J Mater Sci Technol, 2022, 126: 1–14.

[27] [27] HONG D B, YIN Z B, GUO F Z, et al. Microwave synthesis of duplex α/β-SiAlON ceramic cutting inserts: modifying m, n, z values, synthesis temperature, and excess Y2O3 synthesis additive[J]. J Adv Ceram, 2022, 11(4): 589–602.