[1] [1] THOMAS A. Sprayed concrete lined tunnel[M]. New York: Taylor & Francis, 2012: 9.

[2] [2] HEMPHILL G B. Practical tunnel construction[M]. Hoboken: John Wiley & Sons, 2013: 309-322.

[3] [3] JIN X G, HE J, HOU C, et al. The mechanical properties of early aged shotcrete under internal sulfate attack[J]. Materials, 2021, 14(13): 3726.

[4] [4] XIAO J Z, LV Z Y, DUAN Z H, et al. Pore structure characteristics, modulation and its effect on concrete properties: a review[J]. Construction and Building Materials, 2023, 397: 132430.

[7] [7] CHEN W, LI K L, WU M M, et al. Influence of pore structure characteristics on the gas permeability of concrete[J]. Journal of Building Engineering, 2023, 79: 107852.

[8] [8] POWERS T, BROWNYARD T L. Studies of the physical properties of hardened Portland cement paste[J]. Journalof the American Concrete Institute, 1947, 18(7): 845-880.

[9] [9] BRUNAUER S. Tobermorite gel: the heart of concrete[J]. American Scientist, 1962, 50(1): 210-229.

[13] [13] FU H J, WANG X Z, ZHANG L X, et al. Investigation of the factors that control the development of pore structure in lacustrine shale: a case study of block X in the Ordos Basin, China[J]. Journal of Natural Gas Science and Engineering, 2015, 26: 1422-1432.

[14] [14] MA H Y. Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application[J]. Journal of Porous Materials, 2014, 21(2): 207-215.

[18] [18] STORCK S, BRETINGER H, MAIER W F. Characterization of micro- and mesoporous solids by physisorption methods and pore-size analysis[J]. Applied Catalysis A: General, 1998, 174(1/2): 137-146.

[20] [20] IVAN O, JAN S. Pore structure of hydrated calcium silicates. IV. Analysis of a synthetic tobermorite[J]. Journal of Colloid and Interface Science, 1973, 42(2): 291-297.

[21] [21] MITCHELL J, WEBBER J, STRANGE J. Nuclear magnetic resonance cryoporometry[J]. Physics Reports, 2008, 461(1): 1-36.

[22] [22] CHEN J H, LI Y L, ZHOU H, et al. Nuclear magnetic resonance study on concrete pore structure evolution under different curing environments[J]. Journal of Management, 2022, 74(5): 1819-1827.

[23] [23] JEHNG J Y, SPRAGUE D T, HALPERIN W P. Pore structure of hydrating cement paste by magnetic resonance relaxation analysis and freezing[J]. Magnetic Resonance Imaging, 1996, 14(7/8): 785-791.

[24] [24] VALCKENBORG R E, PEL L, KOPINGA K. Combined NMR cryoporometry and relaxometry[J]. Journal of Physics D: Applied Physics, 2002, 35(3): 249-256.

[25] [25] CHUNG S Y, LEHMANN C, ABD ELRAHMAN M, et al. Pore characteristics and their effects on the material properties of foamed concrete evaluated using micro-CT images and numerical approaches[J]. Applied Sciences, 2017, 7(6): 550.

[28] [28] WONG R C K, CHAU K T. Estimation of air void and aggregate spatial distributions in concrete under uniaxial compression using computer tomography scanning[J]. Cement and Concrete Research, 2005, 35(8): 1566-1576.

[30] [30] LIU P, CUI S, LI Z H, et al. Influence of surrounding rock temperature on mechanical property and pore structure of concrete for shotcrete use in a hot-dry environment of high-temperature geothermal tunnel[J]. Construction and Building Materials, 2019, 207(5): 329-337.

[31] [31] FAN L D, ZHANG Z J, YU Y Q, et al. Effect of elevated curing temperature on ceramsite concrete performance[J]. Construction and Building Materials, 2017, 153: 423-429.

[32] [32] PICHLER C, SCHMID M, TRAXL R, et al. Influence of curing temperature dependent microstructure on early-age concrete strength development[J]. Cement and Concrete Research, 2017, 102: 48-59.

[33] [33] ZHANG Z Q, ZHANG B, YAN P. Hydration and microstructures of concrete containing raw or densified silica fume at different curing temperatures[J]. Construction and Building Materials, 2016, 121: 483-490.

[39] [39] WANG J B, NIU D T, ZHANG Y L. Mechanical properties, permeability and durability of accelerated shotcrete[J]. Construction and Building Materials, 2015, 95: 312-328.

[40] [40] NIU D T, WANG J B, WANG Y. Effect of hydration aging and water binder ratio on microstructure and mechanical properties of sprayed concrete[J]. Journal of Wuhan University of Technology-Mater Sci Ed, 2015, 30(4): 745-751.

[42] [42] WANG J B, NIU D T, DING S, et al. Microstructure, permeability and mechanical properties of accelerated shotcrete at different curing age[J]. Construction and Building Materials, 2015, 78: 203-216.

[45] [45] WAN Z M, HE T S, CHANG N, et al. Effect of silica fume on shrinkage of cement-based materials mixed with alkali accelerator and alkali-free accelerator[J]. Journal of Materials Research and Technology, 2023, 22: 825-837.

[57] [57] BARLUENGA G, GIMNEZ M, SEPULCRE A, et al. Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions[J]. Construction and Building Materials, 2018, 191: 1128-1138.

[58] [58] LI Y, HAO J, WANG Z G, et al. Influence of ultra-high-rise pumping on microstructure and multi-scale mechanical properties of concrete based on X-ray CT and 3D mesoscopic numerical simulation[J]. Construction and Building Materials, 2021, 267: 120980.

[59] [59] HAO J, YU B, LI Y, et al. Effect of high pump pressure on chloride migration in ITZ of concrete[J]. Journal of Building Engineering, 2023, 66: 105926.

[61] [61] FEYS D, DE SCHUTTER G, FATAEI S, et al. Pumping of concrete: understanding a common placement method with lots of challenges[J]. Cement and Concrete Research, 2022, 154: 106720.

[65] [65] LAMONTAGNE A, PIGEON M. The influence of polypropylene fibers and aggregate grading on the properties of dry-mix shotcrete[J]. Cement and Concrete Research, 1995, 25(2): 293-298.

[66] [66] JOLIN M, BEAUPR D, PIGEON M, et al. Use of set accelerating admixtures in dry-mix shotcrete[J]. Journal of Materials in Civil Engineering, 1997, 9(4): 180-184.

[69] [69] HU Z, DING H, LAI J X, et al. The durability of shotcrete in cold region tunnel: a review[J]. Construction and Building Materials, 2018, 185: 670-683.

[72] [72] WANG J B, NIU D T. Influence of freeze-thaw cycles and sulfate corrosion resistance on shotcrete with and without steel fiber[J]. Construction and Building Materials, 2016, 122: 628-636.

[77] [77] TAN K F, GJ&#03D5RV O E. The accelerated test of chloride permeability of concrete[J]. Journal of Wuhan University of Technology Materials Science Edition, 2003, 18(2): 57-60.

[78] [78] ABBAA A, CARCASSES M, YSSORCHE-CUBAYNES M P. Permeability of mortars and the degree of saturation[J]. 1er Recontre Internationale de Toulouse, 1998.

[79] [79] MEHTA P K. Hardened cement paste: Microstructure and its relationship to properties[C]//Proceeding of 8th International Congress of the Chemistry of Cement. 1986: 113-121.

[81] [81] CUI L, CAHYADI J H. Permeability and pore structure of OPC paste[J]. Cement and Concrete Research, 2001, 31(2): 277-282.

[83] [83] PRUDNCIO L R Jr. Accelerating admixtures for shotcrete[J]. Cement and Concrete Composites, 1998, 20(2/3): 213-219.

[85] [85] QIU Q W. A state-of-the-art review on the carbonation process in cementitious materials: fundamentals and characterization techniques[J]. Construction and Building Materials, 2020, 247: 118503.

[86] [86] LI Y U, WU Q D. Mechanism of carbonation of mortars and the dependence of carbonation on pore structure[J]. Publication of American Concrete Institute, 1987, 100: 1915-1944.

[87] [87] HOUST Y F, WITTMANN F H. Influence of porosity and water content on the diffusivity of CO2 and O2 through hydrated cement paste[J]. Cement and Concrete Research, 1994, 24(6): 1165-1176.

[88] [88] GAO Y, DE SCHUTTER G, YE G, et al. The ITZ microstructure, thickness and porosity in blended cementitious composite: effects of curing age, water to binder ratio and aggregate content[J]. Composites Part B: Engineering, 2014, 60: 1-13.

[89] [89] BASHEER L, BASHEER P A M, LONG A E. Influence of coarse aggregate on the permeation, durability and the microstructure characteristics of ordinary Portland cement concrete[J]. Construction and Building Materials, 2005, 19(9): 682-690.

[100] [100] OKOCHI H, KAMEDA H, HASEGAWA S I, et al. Deterioration of concrete structures by acid deposition—an assessment of the role of rainwater on deterioration by laboratory and field exposure experiments using mortar specimens[J]. Atmospheric Environment, 2000, 34(18): 2937-2945.