Journal of the Chinese Ceramic Society, Volume. 52, Issue 1, 154(2024)

Fabrication and Characterization of Barium Titanate Based 1-3 Piezoelectric Composites by Stereolithography Technology

CHEN Liuli... CHEN Yan* and JI Xuanrong |Show fewer author(s)
Author Affiliations
  • [in Chinese]
  • show less
    References(22)

    [1] [1] JIANG L M, CHEN R M, XING J E, et al. Fabrication of a (K, Na)NbO3-based lead-free 1-3 piezocomposite for high-sensitivity ultrasonic transducers application[J]. J Appl Phys, 2019, 125(21): 214501.

    [2] [2] SHUNG K K, CANNATA J M, ZHOU Q F. Piezoelectric materials for high frequency medical imaging applications: A review[J]. J Electroceram, 2007, 19(1): 141-147.

    [3] [3] GUO R, WANG C G, YANG A K. Effects of pore size and orientation on dielectric and piezoelectric properties of 1-3 type porous PZT ceramics[J]. J Eur Ceram Soc, 2011, 31(4): 605-609.

    [4] [4] SMITH W A, AULD B A. Modeling 1-3 composite piezoelectrics: Thickness-mode oscillations[J]. IEEE Trans Ultrason Ferroelectr Freq Control, 1991, 38(1): 40-47.

    [5] [5] LEE H J, ZHANG S J. Design of low-loss 1-3 piezoelectric composites for high-power transducer applications[J]. IEEE Trans Ultrason Ferroelectr Freq Control, 2012, 59(9): 1969-1975.

    [6] [6] GENG X C, ZHANG Q M. Resonance modes and losses in 1-3 piezocomposites for ultrasonic transducer applications[J]. J Appl Phys, 1999, 85(3): 1342-1350.

    [7] [7] CHENG K C, CHAN H L W, CHOY C L, et al. Single crystal PMN-0.33PT/epoxy 1-3 composites for ultrasonic transducer applications[J]. IEEE Trans Ultrason Ferroelectr Freq Control, 2003, 50(9): 1177-1183.

    [8] [8] CUI M T, GUO R B, XUE S, et al. The finite element simulation and design of a 50 MHz spherical ultrasonic transducer[C]//2015 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA). Jinan, China. IEEE, 2015: 290-294.

    [9] [9] ZHOU D, LAM K H, CHEN Y, et al. Lead-free piezoelectric single crystal based 1-3 composites for ultrasonic transducer applications[J]. Sens Actuat A Phys, 2012, 182: 95-100.

    [10] [10] PRAMANIK R, AROCKIARAJAN A. Effective properties and nonlinearities in 1-3 piezocomposites: A comprehensive review[J]. Smart Mater Struct, 2019, 28(10): 103001.

    [11] [11] ELTOUBY P, SHYHA I, LI C C, et al. Factors affecting the piezoelectric performance of ceramic-polymer composites: A comprehensive review[J]. Ceram Int, 2021, 47(13): 17813-17825.

    [12] [12] LEE H J, ZHANG S J, BAR-COHEN Y, et al. High temperature, high power piezoelectric composite transducers[J]. Sensors, 2014, 14(8): 14526-14552.

    [13] [13] HAN J S, GAL C W, KIM J H, et al. Fabrication of high-aspect-ratio micro piezoelectric array by powder injection molding[J]. Ceram Int, 2016, 42(8): 9475-9481.

    [14] [14] JIAN X H, LIU P B, LI Z J, et al. Development of self-focusing piezoelectric composite ultrasound transducer using laser engraving technology[J]. IEEE Trans Ultrason Ferroelectr Freq Control, 2019, 66(12): 1866-1873.

    [15] [15] CHAUDHARY R, FABBRI P, LEONI E, et al. Additive manufacturing by digital light processing: A review[J]. Prog Addit Manuf, 2023, 8(2): 331-351.

    [16] [16] CHENG J, CHEN Y, WU J W, et al. 3D printing of BaTiO piezoelectric ceramics for a focused ultrasonic array[J]. Sensors, 2019, 19(19): 4078.

    [17] [17] CHEN Z Y, SONG X, LEI L W, et al. 3D printing of piezoelectric element for energy focusing and ultrasonic sensing[J]. Nano Energy, 2016, 27: 78-86.

    [18] [18] CHEN Y, BAO X L, WONG C M, et al. PZT ceramics fabricated based on stereolithography for an ultrasound transducer array application[J]. Ceram Int, 2018, 44(18): 22725-22730.

    [19] [19] ZHENG K, DING D F, QUAN Y, et al. 3D printing orientation controlled PMN-PT piezoelectric ceramics[J]. J Eur Ceram Soc, 2023, 43(6): 2408-2416.

    [20] [20] DU Q P, ZHANG C, LIU C L, et al. Highly-textured BaTiO3 ceramics with high piezoelectric performance prepared by vat photopolymerization[J]. Addit Manuf, 2023, 66: 103454.

    [21] [21] HUANG W F, WU Y C, CHEN W W, et al. Reinforcement effect in printing precision and sintering performance for liquid crystal display stereolithography additive manufacturing of alumina ceramics[J]. Ceram Int, 2022, 48(22): 33809-33818.

    [24] [24] CHAN H W, UNSWORTH J. Simple model for piezoelectric ceramic/polymer 1-3 composites used in ultrasonic transducer applications[J]. IEEE Trans Ultrason Ferroelectr Freq Control, 1989, 36(4): 434-441.

    Tools

    Get Citation

    Copy Citation Text

    CHEN Liuli, CHEN Yan, JI Xuanrong. Fabrication and Characterization of Barium Titanate Based 1-3 Piezoelectric Composites by Stereolithography Technology[J]. Journal of the Chinese Ceramic Society, 2024, 52(1): 154

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Received: Jun. 7, 2023

    Accepted: --

    Published Online: Jul. 30, 2024

    The Author Email: Yan CHEN (Chenlena@qq.com)

    DOI:

    CSTR:32186.14.

    Topics