[1] [1] TAVARES V, SOARES N, RAPOSO N, et al. Prefabricated versus conventional construction: comparing life-cycle impacts of alternative structural materials［J］. Journal of Building Engineering, 2021, 41: 102705.

[2] [2] ZHAO S B, GAO Y J, CHEN J H, et al. Application and study on time-dependent compressive strength and elastic modulus of C50 pumping concrete［J］. Concrete, 2015(1): 98-101 (in Chinese).

[3] [3] Ministry of Transport of the People’s Republic of China. Technical specification for construction of highway bridges and culverts: JTG/T 3650—2020［S］. Beijing: People’s Traffic Press, 2020 (in Chinese).

[4] [4] DUAN Y, WANG Q C, YANG Z J, et al. Research on the effect of steam curing temperature and duration on the strength of manufactured sand concrete and strength estimation model considering thermal damage［J］. Construction and Building Materials, 2022, 315: 125531.

[5] [5] GONG X R, LI D, GENG J. Water absorption of steam curing machine-made sand concrete［J］. China Concrete and Cement Products, 2021(1): 95-99 (in Chinese).

[6] [6] ZEYAD A M, TAYEH B A, ADESINA A, et al. Review on effect of steam curing on behavior of concrete［J］. Cleaner Materials, 2022, 3: 100042.

[7] [7] CHEN B, CHEN J L, CHEN X D, et al. Experimental study on compressive strength and frost resistance of steam cured concrete with mineral admixtures［J］. Construction and Building Materials, 2022, 325: 126725.

[8] [8] GOU Y. Effect of fly ash on compressive strength of steam cured concrete［J］. Concrete, 2021(7): 86-89 (in Chinese).

[9] [9] LIU B J, XIE Y J, LI J. Influence of steam curing on the compressive strength of concrete containing supplementary cementing materials［J］. Cement and Concrete Research, 2005, 35(5): 994-998.

[10] [10] ZHOU Y, ZHOU J, TANG M X, et al. Influences of fly ash and slag powder on the chloride penetration resistance and carbonation resistance of concrete［J］. Concrete, 2021(7): 60-64 (in Chinese).

[11] [11] LV D S, TANG H. Experimental study on correlation between elastic modulus and compressive strength of high strength concrete［J］. China Concrete and Cement Products, 2001(6): 20-21 (in Chinese).

[12] [12] OUYANG X, SHI C J, SHI J H, et al. Compressive mechanical properties and prediction for elastic modulus of ultra-high performance concrete［J］. Journal of the Chinese Ceramic Society, 2021, 49(2): 296-304 (in Chinese).

[13] [13] Ministry of Transport of the People’s Republic of China. Test procedures for cement and cement concrete for highway engineering： JTG 3420—2020［S］. Beijing： People’s Transportation Publishing House, 2020 (in Chinese).

[14] [14] HE J H, MA K L, LONG G C, et al. Mechanical properties evolution of concrete in steam-curing process［J］. Journal of the Chinese Ceramic Society, 2018, 46(11): 1584-1592 (in Chinese).

[15] [15] WU J D, GUO L P, CAO Y Z, et al. Effect of steam curing system on the early mechanical property and microstructure of ultra-high performance concrete［J］. Journal of Southeast University (Natural Science Edition), 2022, 52(4): 744-752 (in Chinese).

[16] [16] SONG S M, WANG L. Concrete Science［M］. Wuhan: Wuhan University of Technology Press, 2013 (in Chinese).

[17] [17] ZHU B F. Temperature stress and temperature control of mass concrete［M］. 2nd ed. Beijing: China Water Power Press, 2012 (in Chinese).

[18] [18] CHEN W, ZHANG W B, MAO M J, et al. Study on the relationship between compressive-splitting tensile strength of concrete based on mathematical statistics［J］. Ningxia Engineering Technology, 2016, 15(2): 118-122 (in Chinese).

[19] [19] DING F X, YU Z W. Unified calculation method of mechanical properties of concrete in tension［J］. Journal of Wuhan Urban Construction Institute, 2004, 21(3): 29-34 (in Chinese).

[20] [20] Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Code for design of concrete structures: GB 50010—2010［S］. Beijing: China Architecture & Building Press, 2010 (in Chinese).

[21] [21] ACI Committee 318. Building code requirements for structural concrete and commentary: ACI-318［S］. Detroit: American Concrete Institute, 2014.

[22] [22] DU-BETON C E I. CEB-FIP model code 1990: CEB-90［S］. London: Thomas Telford Publishing, 1993.

[23] [23] YU B, TAO B X, LIU Y, et al. Probabilistic prediction model of elastic modulus based on compressive strength of concrete［J］. Concrete, 2017(10): 7-11 (in Chinese).

[24] [24] YANG B, SHENG B, WANG J Z, et al. Study on the influence of fly ash and slag on concrete strength under the condition of single admixture and compound admixture［J］. Journal of China & Foreign Highway, 2017, 37(3): 212-215 (in Chinese).

[25] [25] WANG Y G, REN L F, RONG G C, et al. Study on the preparation of machine-made sand concrete with superfine limestone powder and mineral powder［J］. New Building Materials, 2023, 50(5): 21-24 (in Chinese).

[26] [26] LI W Y, CHENG L K, LIU H H et al. Effect of limestone powder as mineral admixture on mechanical properties and durability of concrete with manufactured sand［J］. Concrete, 2023(10): 82-86 (in Chinese).